Enhancement of Solar Energy Absorption Using A Plasmonic Nanofluid Based on Tio2/Ag Composite Nanoparticles

Yimin Xuan,Huiling Duan,Qiang Li

DOI: https://doi.org/10.1039/c4ra00630e

IF: 4.036

2014-01-01

RSC Advances

Abstract:The TiO2/Ag plasmonic nanofluid can enhance solar light absorption compared with common TiO2nanofluid.

What problem does this paper attempt to address?

Efficiency Enhancement of Organic Solar Cells by Using Shape‐Dependent Broadband Plasmonic Absorption in Metallic Nanoparticles

xuanhua li,wallace c h choy,haifei lu,wei e i sha,a h p ho

DOI: https://doi.org/10.1002/adfm.201202476

IF: 19

2013-01-01

Advanced Functional Materials

Abstract:It is been widely reported that plasmonic effects in metallic nanomaterials can enhance light trapping in organix solar cells (OSCs). However, typical nanoparticles (NP) of high quality (i.e., mono-dispersive) only possess a single resonant absorption peak, which inevitably limits the power conversion efficiency (PCE) enhancement to a narrow spectral range. Broadband plasmonic absorption is obviously highly desirable. In this paper, a combination of Ag nanomaterials of different shapes, including nanoparticles and nanoprisms, is proposed for this purpose. The nanomaterials are synthesized using a simple wet chemical method. Theoretical and experimental studies show that the origin of the observed PCE enhancement is the simultaneous excitation of many plasmonic low- and high-order resonances modes, which are material-, shape-, size-, and polarization-dependent. Particularly for the Ag nanoprisms studied here, the high-order resonances result in higher contribution than low-order resonances to the absorption enhancement of OSCs through an improved overlap with the active material absorption spectrum. With the incorporation of the mixed nanomaterials into the active layer, a wide-band absorption improvement is demonstrated and the short-circuit photocurrent density (Jsc) improves by 17.91%. Finally, PCE is enhanced by 19.44% as compared to pre-optimized control OSCs. These results suggest a new approach to achieve higher overall enhancement through improving broadband absorption.
Optical and Thermal Enhancement of Plasmonic Nanofluid Based on Core/Shell Nanoparticles

Huiling Duan,Liangliang Tang,Yuan Zheng,Ping Zhang

DOI: https://doi.org/10.1007/s11468-017-0613-2

IF: 2.726

2018-01-01

Plasmonics

Abstract:The plasmonic effect is introduced in solar thermal areas to enhance light harvest and absorption. The optical properties of plasmonic nanofluid are simulated by finite difference time domain (FDTD) method. Due to the excitation of localized surface plasmon resonance (LSPR) effect, an intensive absorption peak is observed at 0.5 μm. The absorption characteristics are sensitive to particle size and concentration. As the particle size increases, the absorption peak is broadened and shifted to longer wavelength. The absorption of SiO2/Ag plasmonic nanofluid is improved gradually as the volume concentration increases, especially in the UV region. The absorption edge is shifted from 0.6 to 1.0 μm as the volume concentration increases from 0.001 to 0.01. The thermal simulation of suspended SiO2/Ag nanoparticle shows a uniform temperature rise of 17.91 K under solar irradiation (AM 1.5), while under the same condition, the temperature rises in Ag nanoparticle and Al nanoparticle are 11.12 and 5.39 K, respectively. The core/shell plasmonic nanofluid exhibits a higher photothermal performance, which has a potential application in photothermal areas. A higher temperature rise can be obtained by improving the incident light intensity or optical absorption properties of nanoparticles.
Effect of plasmonic nanoshell-based nanofluid on efficiency of direct solar thermal collector

Huiling Duan,Liangliang Tang,Yuan Zheng,Chang Xu

DOI: https://doi.org/10.1016/j.applthermaleng.2018.01.042

IF: 6.4

2018-01-01

Applied Thermal Engineering

Abstract:•The plasmonic effect is introduced in solar thermal area to enhance light absorption.•The irradiance within the nanofluid attenuates rapidly at resonant wavelength.•The use of nanoshell-based nanofluid can significantly reduce the concentration.•The volume fraction of SiO2/Au nanofluid needed is only 1/5 of Au nanofluid.
Dual Plasmonic Au/TiN Nanofluids for Efficient Solar Photothermal Conversion

Lingling Wang,Guihua Zhu,Min Wang,Wei Yu,Jia Zeng,Xiaoxiao Yu,Huaqing Xie,Qiang Li

DOI: https://doi.org/10.1016/j.solener.2019.04.013

IF: 7.188

2019-01-01

Solar Energy

Abstract:Fabrication highly efficient photothermal conversion nanofluids is a fascinating topic in solar energy harvesting applications. Herein, we present TiN is an excellent alternative plasmonic nanofluid for solar thermal conversion. The optical absorption property and the photothermal conversion performance of titanium nitride (TiN) are superior to another five traditional materials such as carbon nanotube, graphene, Au, Ag and metal sulfide (CuS). Dual localized surface plasmon resonance (LSPR) effect between Au and TiN nanoparticles make the hybrid nanocomposite (Au/TiN) possess superior optical absorption to TiN at the same concentration. The maximal temperature rise of 100 ppm TiN after irradiation for 20 min is 14.2 degrees C. The photothermal conversion efficiency of TiN is much higher than another five conventional nanofluids. All Au/TiN nanofluids with different Au loadings show higher maximal temperature rise than TiN, indicating dual LSPR effect is beneficial for better photo-thermal conversion performance.
Experimental Investigation on the Plasmonic Blended Nanofluid for Efficient Solar Absorption

Huiling Duan,Yuan Zheng,Chang Xu,Yuanfang Shang,Fan Ding

DOI: https://doi.org/10.1016/j.applthermaleng.2019.114192

IF: 6.4

2019-01-01

Applied Thermal Engineering

Abstract:A plasmonic blended nanofluid formed by mixing Au nanoparticles with different shapes in water is proposed in this paper for direct solar absorption. Optical and thermal properties of the plasmonic blended nanofluid are studied numerically and experimentally. Resonant characteristics of Au plasmonic nanoparticles are tuned by particle shapes. Compared with single-component nanofluid, the extinction spectrum of this plasmonic blended nanofluid is broadened. The matching of extinction spectrum and solar radiation spectrum is tuned by adjusting the proportion of components in blended nanofluid. Photothermal properties of three types of plasmonic blended nanofluids are measured experimentally. Due to the higher extinction coefficient, the blended nanofluid exhibits higher temperature rise. A simplified heat transfer model is established to verify experimental results. Simulation results are consistent with experimental results. Before experiment, photothermal properties of different nano fluids can be qualitatively compared by using the simulation model, which can effectively reduce the number and cost of experiments.
Synergistic Effect of Plasmonic Gold Nanoparticles Decorated Carbon Nanotubes in Quantum Dots/TiO2 for Optoelectronic Devices

Gurpreet Singh Selopal,Mahyar Mohammadnezhad,Lucas Besteiro,Ozge Cavuslar,Jiabin Liu,Hui Zhang,Fabiola Navarro-Pardo,Guiju Liu,Maorong Wang,Emek G. Durmusoglu,Havva Yagci Acar,Shuhui Sun,Haiguang Zhao,Zhiming M. Wang,Federico Rosei

DOI: https://doi.org/10.1002/advs.202001864

IF: 15.1

2020-01-01

Advanced Science

Abstract:Abstract Here, a facile approach to enhance the performance of solar‐driven photoelectrochemical (PEC) water splitting is described by means of the synergistic effects of a hybrid network of plasmonic Au nanoparticles (NPs) decorated on multiwalled carbon nanotubes (CNTs). The device based on TiO2–Au:CNTs hybrid network sensitized with colloidal CdSe/(CdSexS1−x)5/(CdS)1 core/alloyed shell quantum dots (QDs) yields a saturated photocurrent density of 16.10 ± 0.10 mA cm−2 [at 1.0 V vs reversible hydrogen electrode (RHE)] under 1 sun illumination (AM 1.5G, 100 mW cm−2), which is ≈26% higher than the control device. The in‐depth mechanism behind this significant improvement is revealed through a combined experimental and theoretical analysis for QDs/TiO2–Au:CNTs hybrid network and demonstrates the multifaceted impact of plasmonic Au NPs and CNTs: i) hot‐electron injection from Au NPs into CNTs and TiO2; ii) near‐field enhancement of the QDs absorption and carrier generation/separation processes by the plasmonic Au NPs; iii) enhanced photoinjected electron transport due to the highly directional pathways offered by CNTs. These results provide fundamental insights on the properties of QDs/TiO2–Au:CNTs hybrid network, and highlights the possibility to improve the performance of other solar technologies.
Optical Properties of Plasma Dimer Nanoparticles for Solar Energy Absorption

Chunlei Sun,Caiyan Qin,Han Zhai,Bin Zhang,Xiaohu Wu

DOI: https://doi.org/10.3390/nano11102722

2021-10-15

Abstract:Plasmonic nanofluids have excellent optical properties in solar energy absorption and have been widely studied in solar thermal conversion technology. The absorption of the visible region of solar energy by ordinary metal nanoparticles is usually limited to a narrow resonance band, so it is necessary to enhance the coupling effect of nanoparticles in the visible spectrum region to improve absorption efficiency. However, it is still a difficult task to improve solar energy absorption by adjusting the structure and performance of nanoparticles. In this paper, a plasma dimer Ag nanoparticle is proposed to excite localized surface plasmon resonance (LSPR). Compared with an ordinary Ag nanoparticle in the visible region, the plasmonic Ag dimer nanoparticle produces more absorption peaks and broader absorption bands, which can broaden solar energy absorption. By analyzing the electromagnetic field of the nanoparticle, the resonance mode of the plasma dimer is discussed. The effects of the geometric dimensions of the nanoparticle and the embedding of two spheres on the optical properties are studied. In addition, the effects of a trimer and its special structure on the optical properties are also analyzed. The results show that the proposed plasma dimer Ag nanoparticle has broad prospects for application in solar thermal conversion technology.
Significant solar energy absorption of MXene Ti3C2Tx nanofluids via localized surface plasmon resonance

Debing Wang,Yuxin Fang,Wei Yu,Lingling Wang,Huaqing Xie,Yanan Yue

DOI: https://doi.org/10.1016/j.solmat.2020.110850

IF: 6.9

2021-01-01

Solar Energy Materials and Solar Cells

Abstract:Efficiency is an important factor in the utilization of solar energy. Direct absorption solar energy collectors (DASCs), a new generation collector of converting solar irradiation into heat directly by nanofluids, is regarded as a promising solution for capturing solar energy with high efficiency. Both good stability and high absorption ability are crucial for nanofluids to be an ideal working fluid of DASCs. In this work, we synthesize hyperstable Ti3C2Tx-H2O nanofluids as the working fluids of DASCs and investigate its photothermal conversion performance. The results show that the maximum conversion efficiency of thin-layer Ti3C2Tx nanofluids achieves 91.9% at a very low mass fraction of 0.02 wt%, which is higher than that of multi-layer Ti3C2Tx samples. Based on the experimental results, a simulation model is built to observe the radiation energy transformation in DASCs and results show that better photothermal performance of thin-layer MXene Ti3C2Tx stems from its stronger localized surface plasmon resonance (LSPR) effect. Besides, the coupling effect and the shape of Ti3C2Tx particles also play important roles in photothermal absorption and conversion. Based on our experimental and numerical results, the Ti3C2Tx-H2O nanofluids have great potential in solar energy harvesting.

materials science, multidisciplinary,physics, applied,energy & fuels
Performance of Nanoparticle-Enhanced Thin-Film Solar Cell with Near-Perfect Absorption

Chunlan Deng,Jun Zhu,Yuanmin Huang

DOI: https://doi.org/10.1016/j.physb.2024.416032

IF: 2.988

2024-01-01

Physica B Condensed Matter

Abstract:This study proposes a thin-film solar cell composed of periodic plasmonic titanium nanoparticles (Ti NPs) and indium phosphide (InP) thin films. By adjusting the size and position of plasma Ti NPs and combining with the transparent conductive layer ITO and anti -reflection layer SiO 2 , the parameters of InP thin film solar cells can be improved. The experimental results show that the average absorption rate reaches 96 % in the wavelength range of 350-850 nm. The absorption rate reached 99.9 % in multiple wavelength ranges. This study has successfully increased the short circuit current to 31 .996mA /cm 2 , power conversion efficiency (PCE) to 29.634 % and open circuit voltage to 1.053 V of InP thin film solar cells.
Enhancement of light trapping in thin-film solar cells through Ag

Yiming Bai,Han Zhang,Jun Wang,Nuofu Chen,Jianxi Yao,Tianmao Huang,Xingwang Zhang,Zhigang Yin,Zhen Fu,白一鸣,张汉,王俊,陈诺夫,姚建曦,黄添懋,张兴旺,尹志岗,付振

DOI: https://doi.org/10.3788/COL201109.032901

IF: 2.56

2011-01-01

Chinese Optics Letters

Abstract:Forward-scattering efficiency (FSE) is first proposed when an Ag nanoparticle serves as the light-trapping structure for thin-film (TF) solar cells because the Ag nanoparticle's light-trapping efficiency lies on the light-scattering direction of metal nanoparticles. Based on FSE analysis of Ag nanoparticles with radii of 53 and 88 nm, the forward-scattering spectra and light-trapping efficiencies are calculated. The contributions of dipole and quadrupole modes to light-trapping effect are also analyzed quantitatively. When the surface coverage of Ag nanoparticles is 5%, light-trapping efficiencies are 15.5% and 32.3%, respectively, for 53- and 88-nm Ag nanoparticles. Results indicate that the plasmon quadrupole mode resonance of Ag nanoparticles could further enhance the light-trapping effect for TF solar cells.
Enhancement of photo-thermal performance using hole plasmonic nanofluids

Xiaoxiao Yu,Guodu He,Zihua Wu,Huaqing Xie,Yuanyuan Wang,Yuanpei Xu,Lan Dong

DOI: https://doi.org/10.1016/j.applthermaleng.2023.121868

IF: 6.4

2023-10-29

Applied Thermal Engineering

Abstract:A single nanoparticle with broadband and strong optical absorption property has great significance for expanding its utilization and saving cost in various fields. This work utilizes the near-spherical nanocavities distributed on the surface of a single nanoparticles (named as "hole nanoparticles") to optimize the optical absorption performance and to reduce the material cost, especially for plasmonic materials. The cavity effect and the localized surface plasmon resonance effect of the hole plasmonic nanofluids can effectively regulate the absorption band to match the solar spectrum and enhance optical absorption property. Apart from gathering the incident light, the cavity effect can enhance the surface resonance effect, then further enhances the optical absorption. Based on the finite-difference time-domain method, the results show that the photothermal conversion efficiency of silver hole nanofluid and titanium nitride hole nanofluid with a cavity size of 10 nm, a cavity depth of 18 nm, and a cavity number of 49 can separately reach 89.1 % and 91 % at just 10 ppm, among which the silver hole nanofluids have higher photothermal conversion efficiency by 15.4 % than the corresponding solid nanofluids. This work provides an efficient strategy to achieve the broadband-spectrum utilization of the single nanoparticle with the low material usage.

energy & fuels,engineering, mechanical,thermodynamics,mechanics
Plasmonic Enhanced Light Absorption of Solar Cells with Metal Nanoparticles

Fang Liu,Di Qu,Qi Xu,Wanlu Xie,Yidong Huang

DOI: https://doi.org/10.1364/e2.2011.jwe11

2011-01-01

Abstract:Get PDF Email Share Share with Facebook Tweet This Post on reddit Share with LinkedIn Add to CiteULike Add to Mendeley Add to BibSonomy Get Citation Copy Citation Text F. Liu, D. Qu, Q. Xu, W. Xie, and Y. Huang, "Plasmonic Enhanced Light Absorption of Solar Cells with Metal Nanoparticles," in Renewable Energy and the Environment, OSA Technical Digest (CD) (Optica Publishing Group, 2011), paper JWE11. Export Citation BibTex Endnote (RIS) HTML Plain Text Citation alert Save article
Tin-silica-silver composite nanoparticles for medium-to-high temperature volumetric absorption solar collectors

Jia Zeng,Yimin Xuan,Huiling Duan

DOI: https://doi.org/10.1016/j.solmat.2016.08.012

IF: 6.9

2016-01-01

Solar Energy Materials and Solar Cells

Abstract:Volumetric absorption, which requires media with good optical and thermal properties, is a promising technology for solar collectors. An advanced composite core/shell nanostructure, which can be used for the integration of sunlight harvest and energy storage, is reported in this paper. The composite core/shell nanoparticles are composed by Sn, SiO2 and Ag. Sn material is used for thermal energy storage through phase change, and SiO2 provides containment. Ag shell can improve light absorption of nanoparticles due to the localized surface plasmon resonance (LSPR) effect. Compared with pure nanoparticles, the Sn/SiO2/Ag composite nanoparticles have good abilities of both optical absorption and thermal energy storage, which can improve the performance of volumetric absorption solar collectors at medium to high temperature. (C) 2016 Elsevier B.V. All rights reserved.
Ti3C2Tx and copper sulfide composite nanofluid with hierarchical structure for sustainable and efficient solar light-thermal conversion

fangfang su,Zhongjie He,Jinliang Xie,Jing Zhang,Weirui zhang,Yangyang Xin,Aibo Zhang,Dongdong Yao,Ya-ping Zheng

DOI: https://doi.org/10.1039/d3ta03908k

IF: 11.9

2023-08-31

Journal of Materials Chemistry A

Abstract:In recent years, solar energy has gained significant attention due to its clean, abundant, and renewable characteristics. Among various solar energy applications, solar thermal conversion has emerged as one of the most promising and straightforward methods. As a new type of photothermal material, MXene has been widely studied, but its low layer roughness and high reflection coefficient result in weak light-thermal conversion performance. In this work, we prepared nanofluids for light-thermal conversion by utilizing electrostatic interactions between polydopamine (PDA) modified Ti3C2Tx/FCuS and Ti3C2Tx/HCuS with [EBIM]NTf2. The introduction of FCuS and HCuS can effectively increase the surface roughness of Ti3C2Tx, thereby increase the light receiving area of the material. Research has demonstrated that ionic liquids (ILs) can serve as effective heat collecting working fluids, expanding the liquid path range of nanofluids and providing them with enhanced thermal stability. Furthermore, ILs exhibit lower viscosity, which is advantageous for their efficient pumping in various industrial applications. Research on the light absorption performance and light-thermal conversion performance has found that the Ti3C2Tx/FCuS-IL and Ti3C2Tx/HCuS-IL nanofluids could achieve complete spectral absorption at lower mass fractions of 0.08% and 0.10%, respectively, and exhibited a faster heat transfer rate. The T_eq that Ti3C2Tx/FCuS-IL (0.08%) could achieve 80.2 °C at 1 Sun, with a η_LTC of up to 94% and good cycling stability. Additionally, the evaporation performance of Ti3C2Tx/FCuS-IL (0.12%) and Ti3C2Tx/HCuS-IL (0.12%) had been improved by 148.6% and 134.3% compared to pure water at 1 Sun. The outstanding light-thermal conversion performance of these nanofluids holds great potential advantages in various applications, such as seawater desalination, cancer treatment, hydrophobic anti-icing, and more.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Photothermal Properties of Plasmonic Nanoshell-Blended Nanofluid for Direct Solar Thermal Absorption.

Huiling Duan,Rongjie Chen,Yuan Zheng,Chang Xu

DOI: https://doi.org/10.1364/oe.26.029956

IF: 3.8

2018-01-01

Optics Express

Abstract:The excitation of localized surface plasmon at the metal nanoparticles can significantly enhance the absorption of solar energy. However, the absorption peak is sharp at the resonant frequency. To achieve a broadband absorption, the blended nanofluid formed by SiO2/Ag nanoshells of different core size and shell thickness is employed. The blended nanofluid has a good solar absorption property, whose extinction spectrum matches the solar spectrum well. The transient temperature response of the nanofluid is simulated. It is found that the photothermal performance of the solar thermal collector is related to the geometric parameters and operation conditions of the solar collector, and the optical and thermophysical properties of nanofluid. As the flow velocity increases, the outlet temperature is gradually reduced. But, the collector efficiency is increased since less heat is lost to the environment via convection as nanofluid flows fast in the channel. In order to obtain a large outlet temperature at high velocity, it can be considered to elongate the channel length. Due to the strong extinction properties of the blended nanofluid, the required volume fraction can be significantly reduced, only 1/10 of that of Ag nanofluid for an equal temperature increases.
Role of Base Fluid on Enhancement Absorption Properties of Fe3O4/ionic Liquid Nanofluids for Direct Absorption Solar Collector

Pengfei Cao,Yuan Li,Yuyao Wu,Huizhen Chen,Jing Zhang,Lin Cheng,Tiaoming Niu

DOI: https://doi.org/10.1016/j.solener.2019.11.039

IF: 7.188

2019-01-01

Solar Energy

Abstract:Different types of ionic liquid-based nanofluids have been studied by the researchers since the last two decades. Most of the studies have focused on the effect of nanoparticles on the enhancement optical properties (absorption, transmittance, scattering, and extinction coefficient) of the corresponding ionic liquid-based nanofluids. However, optical properties of ionic liquid-based fluid have considerable contribution to absorbance in nanofluids. Therefore, it is necessary to study absorption properties of the different ionic liquid-based fluid of corresponding nanofluids to utilize ionic liquid-based nanofluids in solar thermal applications. The effect of the anion and cation radius in the ionic liquid on the enhancement absorption properties of the corresponding nanofluids is investigated. Through the measurement results, we find that as the cation radius or anion radius increases, the transmittances of the corresponding nanofluids decrease sharply, which is beneficial to enhance absorption properties of Fe3O4/ionic liquid nanofluids. At the same time, we also find that the large viscosity increase the stability of ionic liquid nanofluids, which can affect the absorption properties. Understanding the effect of ILs base fluid on enhancement absorption properties of the corresponding nanofluids will pave the road for improving the efficiency for direct absorption solar collectors.
Graphene Nanofluids Containing Core-Shell Nanoparticles with Plasmon Resonance Effect Enhanced Solar Energy Absorption

Desong Fan,Qiang Li,Weibing Chen,Jia Zeng

DOI: https://doi.org/10.1016/j.solener.2017.09.031

IF: 7.188

2017-01-01

Solar Energy

Abstract:Nanofluids are a kind of important working fluid in volumetric solar collector. Here, we presented a novel strategy to enhance the solar absorption properties of graphene nanofluids utilizing the plasmon resonance of core-shell nanoparticles. The preparation, micrograph, optical properties and thermal conductivity of nanofluid have been investigated by considering the effect of volume fractions, nanoparticles selection and temperature. Results show that the graphene-embedded Sn@SiO2@Ag nanofluid exhibits a strong absorption band in the range of 250-300 nm and 380-600 nm. The solar absorption performance of graphene nanofluids is enhanced significantly by the plasmon resonance absorption and thermal conduction bridge of graphene-embedded Sn@SiO2@Ag core-shell nanoparticles. The solar absorptance performance of graphene nanofluids was enhanced 2.9 times by adding 0.4 g/L Sn@SiO2@Ag solutions. An enhancement in thermal conductivity of 11.3% was obtained at 20 degrees C, and 16% enhancement at 50 degrees C for 0.3 g/L graphene-embedded Sn@SiO2@Ag nanofluids. It is concluded that the synergic effect of Sn@SiO2@Ag core-shell nanoparticles and graphene nanosheets increases both the solar absorption coefficient and thermal conductivity of the nanofluids.
Photothermal Properties of Plasmonic Composite Nanoparticles

Hui-Ling DUAN,Qiang LI,Yuan ZHENG

2017-01-01

Journal of Engineering Thermophysics

Abstract:The core/shell composite plasmonic nanoparticles are used in photothermal area due to its unique optical and thermal properties as plasmonic effect excited.The optical properties of plasmonic nanofluid are simulated by finite difference time domain (FDTD) method.The electrical-field and heat power density are significantly enhanced at resonance frequency.As particle size increases, the absorption peak of lower absorptance is broadened and shifted to longer wavelength.The photothermal properties are simulated based on energy balance equation.For particle size of 20 nm and shell thickness of 5 nm (volume concentration φ =0.005), the average temperature rise within nanofluid is 35.7 K.The average temperature is reduced as particle size increases.
Plasmon Enhanced Dye-Sensitized Solar Cells Using Nanoparticles of Different Geometries and Materials

Qi Xu,Fang Liu,Yidong Huang

2014-01-01

Abstract:Plasmonic dye sensitized solar cells with three sorts of nanoparticles are investigated. By utilizing nanoparticles of different geometries and metals, optical and electrical improvement is demonstrated whilst the efficiency is significantly boosted over 30%.
Tunable Plasmonic Resonance Using Core-Shell Nanoparticles for Increasing Optical Absorption in Solar Cells

Di Qu,Fang Liu,Yidong Huang,Wanlu Xie,Qi Xu

DOI: https://doi.org/10.1364/cleo_at.2012.jth2a.96

2012-01-01

Abstract:Using metal-dielectric core-shell nanoparticles to tune the plasmonic resonance peak for increasing optical absorption in solar cells is proposed and investigated. The enhancement region could be tuned in a large wavelength range of about 200nm.

Enhancement of Solar Energy Absorption Using A Plasmonic Nanofluid Based on Tio2/Ag Composite Nanoparticles

Efficiency Enhancement of Organic Solar Cells by Using Shape‐Dependent Broadband Plasmonic Absorption in Metallic Nanoparticles

Optical and Thermal Enhancement of Plasmonic Nanofluid Based on Core/Shell Nanoparticles

Effect of plasmonic nanoshell-based nanofluid on efficiency of direct solar thermal collector

Dual Plasmonic Au/TiN Nanofluids for Efficient Solar Photothermal Conversion

Experimental Investigation on the Plasmonic Blended Nanofluid for Efficient Solar Absorption

Synergistic Effect of Plasmonic Gold Nanoparticles Decorated Carbon Nanotubes in Quantum Dots/TiO2 for Optoelectronic Devices

Optical Properties of Plasma Dimer Nanoparticles for Solar Energy Absorption

Significant solar energy absorption of MXene Ti3C2Tx nanofluids via localized surface plasmon resonance

Performance of Nanoparticle-Enhanced Thin-Film Solar Cell with Near-Perfect Absorption

Enhancement of light trapping in thin-film solar cells through Ag

Enhancement of photo-thermal performance using hole plasmonic nanofluids

Plasmonic Enhanced Light Absorption of Solar Cells with Metal Nanoparticles

Tin-silica-silver composite nanoparticles for medium-to-high temperature volumetric absorption solar collectors

Ti3C2Tx and copper sulfide composite nanofluid with hierarchical structure for sustainable and efficient solar light-thermal conversion

Photothermal Properties of Plasmonic Nanoshell-Blended Nanofluid for Direct Solar Thermal Absorption.

Role of Base Fluid on Enhancement Absorption Properties of Fe3O4/ionic Liquid Nanofluids for Direct Absorption Solar Collector

Graphene Nanofluids Containing Core-Shell Nanoparticles with Plasmon Resonance Effect Enhanced Solar Energy Absorption

Photothermal Properties of Plasmonic Composite Nanoparticles

Plasmon Enhanced Dye-Sensitized Solar Cells Using Nanoparticles of Different Geometries and Materials

Tunable Plasmonic Resonance Using Core-Shell Nanoparticles for Increasing Optical Absorption in Solar Cells