Abstract:When a subsurface flaw is located near the component free surface, the first step consists of characterizing the flaw as surface or subsurface in compliance with subsurface-to-surface flaw proximity rules. The re-characterization process from subsurface to surface flaw is addressed in all Fitness-for-Service (FFS) Codes. However, the specific criteria for the rules on transforming subsurface flaws to surface flaws are different among the FFS Codes. This re-characterization concept is essential and important for subsurface flaws in the flaw assessment procedures. It is applied for three stages of the flaw assessment: at service inspection for flaw characterization, at subcritical crack growth calculation, such as fatigue crack growth, and at ductile/brittle fracture assessment. In this frame, fatigue crack growth experiments were recently conducted by the authors and it was highlighted that the subsurface-to-surface transformation is highly sensitive to the aspect ratio a/l of the flaw whereas the proximity factors in the rules are defined by constant values i.e., regardless of the flaw aspect ratios a/l. The authors have therefore proposed a new subsurface-to-surface flaw proximity rule based on experimental data and equivalent fatigue crack growth rates. Then, the authors demonstrated through numerous Fatigue Crack Growth (FCG) calculations that the current ASME B&PV Code Section XI surface proximity factor should be updated according to the type of component i.e., piping or vessel. The paper summarizes all the steps leading to the improvement of the ASME Code Section XI subsurface-to-surface proximity rule, from the fatigue crack growth experiments to the studies of the suitability of the current flaw-to-surface proximity factor. Furthermore, based on additional fatigue crack growth calculations and more refined investigations, the paper proposes finally a new limit value for the surface proximity factor. As a result, a proposal for modification of the ASME Code Section XI, Appendix C is provided. The paper is used for the technical basis of this proposal.

Study on Flaw Acceptance Standard of ASME Code Sec. XI Based on Failure Probability

Sensitivity Study on the Effects of Nondestructive Examinations on Failure Probabilities of Reactor Pressure Vessels

Application of Flaw Updating Process on Probabilistic Integrity Analysis for a Reactor Pressure Vessel Subjected to Pressurized Thermal Shocks

Application Of Flaw Updating Process On Probabilistic Structural Evaluation For A Reactor Pressure Vessel Under Pressurized Thermal Shocks

Quick Evaluation Method for Defect Exceeding the Allowable Flaw Size in Pressure Vessel of Nuclear Reactor for Power Plant and Space Heating

Study on Flaw-to-Surface Proximity Rule for Transforming Subsurface Flaws to Surface Flaws Based on Fatigue Crack Growth Experiments

Fatigue Crack Growth Calculations for Vessels Considering Subsurface to Surface Flaw Proximity Rules

Effect of the Thickness on Re-Characterisation of Subsurface to Surface Flaw: Application on Piping and Vessels

Evaluation of Stress Intensity Factor Interactions Between Adjacent Flaws with Large Aspect Ratios

Importance of fracture criterion and crack tip material characterization in probabilistic fracture mechanics analysis of an RPV under a pressurized thermal shock

Sensitivity Analysis of Failure Probability on PTS Benchmark Problems of Pressure Vessel Using a Probabilistic Fracture Mechanics Analysis Code.

Improvements to a probabilistic fracture mechanics code for evaluating the integrity of a RPV under transient loading

Rules For Flaw Interaction For Subsurface Flaws In Operating Pressurized Vessels: Technical Basis Of Code Case N-877

Proposal of a New Subsurface-to-Surface Flaw Transformation Rule for Fatigue Crack Growth Analyses

Embedded Crack Treatments and Fracture Toughness Evaluation Methods in Probabilistic Fracture Mechanics Analysis Code for the PTS Analysis of RPV

Verification of Probabilistic Fracture Mechanics Analysis Code Through Benchmark Analyses

Limit Load Estimation Method for Pipe with an Arbitrary Shaped Circumferential Surface Flaw

Guideline on Probabilistic Fracture Mechanics Analysis for Japanese Reactor Pressure Vessels

Development of Rpv Reliability Analysis Code Based on Probabilistic Fracture Mechanics Methodology

Verification of Probabilistic Fracture Mechanics Analysis Code for Reactor Pressure Vessel

Probabilistic Fracture Mechanics Analyses of Reactor Pressure Vessel under PTS Transients