Abstract:The existence of organic impurities in bauxite significantly hampers the regular production of alumina. This study proposes a low-temperature ultrasonic-enhanced alkali leaching to directly separate organic impurities from bauxite, and purify the leaching solution through H 2 O 2 oxidation and CaO precipitation. Under the optimal conditions of 550 W ultrasonic power, 80 °C, 60 min, and 200 g/L NaOH concentration, the leaching rate of organic carbon in bauxite is 91.02 %, which is 19.01 % higher than conventional alkali leaching, and the organic carbon content in the bauxite decreased from 0.59 % to 0.06 % after leaching. Kinetic studies indicate that the limiting factors of the leaching rate vary under different leaching temperatures and leaching times. Characterization of bauxite before and after leaching using various detection techniques demonstrates the effective separation of organic impurities while basically no loss of alumina and increasing the alumina to silica ratio to 34.13. Subsequently, H 2 O 2 and CaO are introduced to the leaching solution with 20 % and 800 mL/g, respectively. The oxidation process under 550 W ultrasonic power at 90 °C for 60 min achieves an 71.35 % removal rate of organic carbon. GC-MS analysis confirms the successful removal of the main organic substances in the leaching solution, while XRD analysis of the oxidation residue indicates that organic substances are ultimately removed as CaC 2 O 4 ·H 2 O and CaCO 3 . Additionally, a proposed free radical reaction mechanism of H 2 O 2 oxidizing organic substances is discussed. In conclusion, this study providing valuable insights for the removal of organic pollutants in the alumina production process.

Technology and mechanism of desilication from roasted diasporic bauxite in atmosphere

Suspension calcination and alkali leaching of low-grade high-sulfur bauxite: Desulfurization, mineralogical evolution and desilication

Study on New Desilication Technology of High Silica Bauxite

The Desulfurization and Digestion Property of High-Sulfur Bauxite with Coarse-Grained Particles by Roasting: Desulfurization Ratio and Digestion Kinetics

Treatment and utilization of bauxite residue

The Alkaline Leaching Behavior of Silica Solid Solutions in the Product Obtained by Roasting the Mixture of High-Alumina Coal Gangue and Hematite

Effective Desulfurization and Alumina Digestion of High-Sulfur Bauxite by New Roasting Process with Conveying Bed

Flotation Decarbonization and Desulfurization of a High-Sulfur Bauxite in China

Mechanism of ultrasonic-enhanced leaching for separating organic impurities from the surface of bauxite and H 2 O 2 oxidation-CaO precipitation for purifying the leaching solution

A Case Study of Producing Alumina from High-Sulfur Diasporic Bauxite: Sulfur-Containing Desilication Products and Pyrite in Red Mud

Green liquor desilication via black liquor combustion process for bamboo pulping

An Environmentally Friendly Design for Low-Grade Diasporic-Bauxite Processing

Characterization of High Sulfur Bauxite and Its Phase Transformation During Desulfurization: A Perspective from Process Mineralogy

Structure and chemical composition of low-silicon white mud based on technology of black liquor combustion desilication

Investigation on bio-desilication process of fly ash based on a self-screened strain of Bacillus amyloliquefaciens and its metabolites

Leaching mechanism of SiO2 in activated kaolinite clinker with low modulus sodium silicate solution

Kinetics and mechanism of desilication reaction in sodium chromate solution using sodium aluminate

Research on Sodium Salt Roasting-Acid Leaching Technology for High-alumina and High-silicon Refractory Limonite

Flotation enhancement of low-grade bauxite using oxalic acid as surface pretreatment agent

Recovery of Scandium from Bauxite Residue by Selective Sulfation Roasting with Concentrated Sulfuric Acid and Leaching

Preparation of Alumina and Silica White from Oil Shale Residue