Abstract:The effect of mesh, turbulence model and discretization scheme in Reynolds-averaged Navier-Stokes method (RANS) on a stall inception eigenvalue approach is investigated in a transonic compressor rotor. The most influencing flow structures on the result of eigenvalue approach are also identified. The compressor stall point is calculated by a recently developed eigenvalue model. Based on the 3D Navier-Stokes equations, the body-force term and small disturbance were used to transform the original equations into the eigenvalue approach. Because the eigenvalue mainly relies on the results from RANS, the sensitivity of the eigenvalue to the mesh density, turbulence model, and numerical scheme needs to be clearly identified before it is applied to engineering. The effect of mesh density is firstly specified. Several grids with different densities and distributions are employed in RANS. The eigenvalue results indicate that the solution converges at the same grid density as RANS does. Besides, the eigenvalue approach has the ability to predict a more accurate stall point compare to RANS with a coarse computational grid. The investigation of the detailed flow field indicates that the flow structures in the vicinity of blade tip region change significantly with three different grid densities, the eigenvalue is also influenced. Two important flow mechanisms are found to be the decisive factors for the eigenvalue, namely the blockage generated by the shock-vortex interaction, the separated flow and the wake near the trailing edge. These flow patterns are consistent with the flow mechanisms of the compressor stall inception. Further investigations are conducted with four different turbulence models combined with three different spatial discretization schemes. Calculated eigenvalue proves that the turbulence model changes the eigenvalue with an over-prediction of stall point at about 1%. The spatial discretization scheme has small effect on stall point prediction using k-ε and SA models, whereas it has large effect when using SST model. The scheme shows great influence in the simulations with specific turbulence model by changing the predicted stall point at least 1.7%. The existence of blockage, the separation and the wake flow are identified as the major and secondary factor which contributes to an unstable prediction of eigenvalue approach, respectively.

Numerical Prediction of Stall Inception in Centrifugal Compressor Using Eigenvalue Method

Flow Stability Model of Centrifugal Compressors Based on Eigenvalue Approach

Calculation of Flow Instability Inception in High Speed Axial Compressors Based on an Eigenvalue Theory

A Numerical Approach to Predict the Rotating Stall in the Vaneless Diffuser of a Centrifugal Compressor Using Eigenvalue Method

Basic studies of flow-instability inception in axial compressors using eigenvalue method

Research Progress in Prediction of Flow Instability of Aero-Compressor

Effect Of Rans Method On The Stall Onset Prediction By An Eigenvalue Approach

Computational Model for Stall Inception and Nonlinear Evolution in Axial Flow Compressors

A Theoretical Model For Flow Instability Inception In Transonic Fan/Compressors

Effect of RANS Method on Stall Inception Eigenvalue Approach

Aerodynamic Instabilities of Swept Airfoil Design in Transonic Axial-Flow Compressors

A Method of Stall and Surge Prediction in Axial Compressors Based on Three-Dimensional Body-Force Model

Nonlinear Instability of Axial Flow Compression Systems

A General Theory of Flow-Instability Inception in Turbomachinery

A Review of Numerical Methodologies for Predicting Rotating Stall and Surge in High-Speed Centrifugal Compressors

Preliminary Aeroelastic Stability Design for Heavy Duty Gas Turbine Compressor Blade

NUMERICAL INVESTIGATION OF DIFFUSER ROTATING STALL AND SYSTEM INSTABILITY IN A CENTRIFUGAL COMPRESSOR WITH VANED DIFFUSER

Numerical Prediction of Multi-Stage Axial Compressor Performances

Numerical Simulations of Onset of Volute Stall Inside a Centrifugal Compressor

Prediction of centrifugal compressor instabilities for internal combustion engines operating cycle simulation

Unsteady Numerical Simulation in A Centrifugal Compressor Using the Time-Inclined Operator