Abstract:Ternary transition metal nitride coatings are promising for many applications as they can offer improved hardness and oxidation resistance compared to binary counterparts. A common challenge in the deposition of functional nitride thin films is oxygen contamination. Even low amounts of oxygen contamination can adversely affect the functional properties of the thin films. Here, we present a practical approach for the growth of virtually oxygen-free (Ti, Zr)N thin films. To cover the complete compositional range of (Ti,Zr)N coatings we employ combinatorial reactive co-sputtering. The depositions are carried out with or without applying a low-power radio-frequency (RF) bias voltage to the substrate holder to study the possibility of decelerating energetic oxygen ions and effectively reducing oxygen contamination in the growing film. High-throughput structural analysis and functional property mapping are used to elucidate the synthesis-property relationships. The structural analysis indicates solid solution formation over the entire compositional range, as evidenced by Vegardian lattice scaling, regardless of the applied RF substrate bias. Irrespective of the composition of the films, the application of RF substrate bias leads to a dramatic reduction of oxygen contamination, as demonstrated by X-ray photoelectron spectroscopy (XPS) depth-profile mapping. This is reflected in a significant improvement in the films' conductivity and hardness. We demonstrate that the reduction in oxygen contamination is intrinsic to the process and not due to changes in the microstructure. The approach presented here is applicable to both conductive and insulating substrates and provides a practical route to synthesize nitride thin films with improved purity that can be applied in standard sputter chambers and on many different material systems.

High-rate Sputtering Deposition of High- and Low-Refractive Index Films from Conductive Composites

Deposition of Dense SiO2 Thin Films for Electrical Insulation Applications by Microwave ECR Plasma Source Enhanced RF Reactive Magnetron Sputtering

Optical Properties Study of Silicon Oxynitride Films Deposited by RF Magnetron Sputtering

Microstructure and Optical Properties of ZnO Films Deposited by Radio-frequency Reactive Magnetron Sputtering

Nanoporous Silicon Dioxide Films for Large Area and Low-Cost Fabrication of Ultra-Low Refractive Index Coatings

ZnS/Diamond Composite Coatings for Infrared Transmission Applications Formed by the Aerosol Deposition Method

Ultrasound Supported Galvanostatic Deposition of Zn Coatings Reinforced with Nano-, Submicro-, and Micro-SiC Particles—Weak Acidic Chloride Baths

Effect of deposition rate on anti-reflection and wettability properties of RF magnetron sputtering SiCON thin film

Highly Conductive Ultrathin Co Films by High-Power Impulse Magnetron Sputtering

Reducing the oxygen contamination in conductive (Ti,Zr)N coatings via RF-bias assisted reactive sputtering

Facilitating Complex Thin Film Deposition by Using Magnetron Sputtering: A Review

Properties of Dielectric Coatings Produced by Ion Assisted Deposition.

Low Voltage Ion Plating Technique for the Deposition of ZnS, MgF2 Films

In-Sn-Zn Oxide Nanocomposite Films with Enhanced Electrical Properties Deposited by High-Power Impulse Magnetron Sputtering

Synthesis and Characterization of HfO2 and ZrO2 Thin Films Deposited by Plasma Assisted Reactive Pulsed Laser Deposition at Low Temperature

Optical Multicoating Using Low-Refractive-Index SiO2 Optical Thin Films Deposited by Sputtering and Electron Beam Evaporation

Effect of C2h2 Flow Rate on the Deposition of Zr-Zrc-Zrc/Dlc Gradient Nano-Composite Film on Biomedical Niti Alloy

Characterization of NiCuOxNy Coatings Obtained via RF Sputtering: Structure, Morphology, and Optical Properties

Low Temperature Deposition of Functional Thin Films on Insulating Substrates: Selective Ion Acceleration using Synchronized Floating Potential HiPIMS

Li-Doped Zno Ceramic Target Preparation And Rf Magnetron Sputtering Zno Films