Abstract:The accurate prediction of heat transfer deterioration (HTD) is important to ensure the safe operation of scCO(2) cycles driven by various heat sources. Here, the scCO(2) heat transfer experiment is performed in a 10 mm diameter vertical tube, covering the ranges of pressures 7.51-21.1 MPa, mass fluxes 488-1500 kg/m(2)s and heat fluxes 43.7-488 kW/m(2). Both uniform heating and non-uniform heating cases are dealt with, but more attention is paid on non-uniform heating. We show that non-uniform heating displays strong circumference angles dependent heat transfer characteristic. Normal heat transfer (NHT) displays gentle rise of wall temperatures along flow length, but for HTD, wall temperature peak is detected ahead of pseudo-critical point. Pseudo-boiling is introduced to deal with scCO(2) heat transfer. Heat added to scCO(2) is decoupled into a temperature rise part and a phase change part. Flow structure includes a vapor-like fluid near tube wall and a liquid-like fluid in tube core. The analogy between subcritical boiling and supercritical heat transfer results in a supercritical-boiling-number SBO to govern the vapor layer thickness. Sudden change from NHT to HTD is found when crossing a critical SBOcr, which is 5.126 x 10(-4) for uniform heating based on our experimental data and other data in the literature, but becomes 8.908 x 10(-4) for non-uniform heating using our experimental data. Compared to uniform heating, non-uniform heating is found to delay the occurrence of HTD. The criterion presented here is useful to avoid the occurrence of HTD in the design and operation of scCO(2) cycles.

A Simple Method for the Correction of Departure from the DSC Programmed Heating or Cooling Rates

Temperature profile movement investigation and application to a control scheme with corrected set-point for a heat integrated distillation column

A TEMPERATURE-GRADIENT CORRECTION METHOD FOR FILM COOLING EFFECTIVENESS MEASUREMENT USING ENDOSCOPE-BASED PSP TECHNIQUE

Reference temperature correction and dimensionless number analysis for heat transfer of supercritical CO2 in horizontal tubes

Engineering Calculation of Heat Flux at the Stagnation Point of Cylinder in Transitional Region

Heat dissipation analysis and correction of the sample in accelerating rate calorimetric experiment

Metrology based on transient heat transfer theory for evaluating phase change materials with differential scanning calorimetry

Correction Algorithm for Calculating Heat Transfer in Air-Cooling Condenser Based on Analyzing Steam Condensation Locations

Self-correction Algorithms to Estimate the Temperature Distribution of Rotary Air Preheaters

Specific Heat Smoothing Methods for Numerical Heat Transfer Analysis Involving Phase Change in a Model Food System

A Temperature Prediction-Correction Method for Estimating Surface Soil Heat Flux from Soil Temperature and Moisture Data

Study on discharge method for measurement flow rate characteristics based on heat-exchange

Experimental study on heat discharging rate adjustment performance of high-temperature phase change thermal storage electric heaters

Advancements in design of radiant floor heating systems with an innovative simplified calculation method

Predictor-corrector Algorithm for Solving Quasi-Separated-flow and Transient Distributed-Parameter Model for Heat Exchangers

Comprehensive correction coefficient of heat metering for residential buildings in China

Method for Modifying Convective Heat Transfer Coefficients Used in the Thermal Simulation of a Feed Drive System Based on the Response Surface Methodology

Effect of Non-Uniform Heating on Scco2 Heat Transfer Deterioration

Experimental Analysis on the Decoupling of Temperature and Humidity by Using a Double Circuit Cooling Coil

Experimental study of thermal-hydraulic performance of a printed circuit heat exchanger with straight channels