Abstract:Considering the low accuracy, slow speed and small adjustment range of measuring an object with a spherical surface using traditional interferometry owing to adjusting the posture of the object, an automatic laser differential confocal interferometric measurement method is proposed to measure the surface shapes, which achieves the high-precision confocal axial positioning of the measured object through a precise differential confocal fixedfocus technology. The posture of the measured object is adjusted through a five-dimensional adjustment workbench. Subsequently, the Zernike fitting is used to reduce the defocus and tilt errors, and a zero-order fringe adjustment of the interferometric surface shape is achieved, automatically determining the surface shape. A laser differential confocal interferometric measurement system for surface shapes was constructed. Experiments demonstrate that the difference between the automatic interference measurement results and the Zygo interferometer measurement results is 0.0004 lambda, the repeated measurement accuracy of this method can reach 0.0019 lambda, the average measurement time of a single interferometric surface shape is 20.1 s, and the measurement efficiency is improved by 1.5 times compared to the manual adjustment to the zero-order fringe. Compared with the traditional adjustment based on Zernike fitting, this method has increased the lateral adjustment range by 11.5 times and the axial adjustment range by 1.5 times. This method provides an effective measurement method for the rapid and high-precision measurement of interferometric surface shapes.

High-precision Radius Automatic Measurement Using Laser Differential Confocal Technology

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

Development of laser differential confocal radius measurement system

Laser Differential Confocal Radius Measurement Method for the Cylindrical Surfaces.

Automatic Measurement of Center Deviation of Lens of Laser Differential Confocal

Experimental Research on Radius of Curvature Measurement of Spherical Lenses Based on Laser Differential Confocal Technique

High-Precision Laser Transverse Differential Confocal Radius Measurement Method

Laser Confocal Measurement System for Curvature Radii of Lenses

Radius Measurement by Laser Confocal Technology

Laser Differential Confocal Ultra-Large Radius Measurement for Convex Spherical Surface

Laser confocal cylindrical radius measurement method and its system.

Laser Differential Confocal Interference Surface Automatic Measurement Method

Laser Confocal Measurement System for Curvature Radius of Lenses Based on Grating Ruler

Laser differential confocal curvature measurement system with grating length

Laser Confocal Interference Surface Rapid and High-Precision Automatic Measurement

Laser transverse dual differential confocal radius measurement with high efficiency and high precision

Interferometric Measurement of the Radius of Curvature Based on Axial Displacement from a Confocal Position and Corresponding Defocus Wavefront

Dynamic Confocal Optical Probe Based on Time Difference Measurement

Laser Differential Confocal Lens Refractive Index Measurement

Laser Differential Confocal Interference Multi-Parameter Comprehensive Measurement Method and Its System for Spherical Lens.