Abstract:A low-noise, low power, high modulation-bandwidth design integrated laser current and temperature driver with excellent long-term stability is described. The current driver circuit is based on the Hall-Libbrecht design. A high sensitivity and a stable driver current were obtained using a differential amplifier and an integral amplifier. The set-point voltage for the current driver came from an ultra-compact, ultra-low temperature coefficient voltage reference chip or the digital to analog convertor output of a microcontroller or a modulation signal. An integral temperature chip, referred to as ADN8834, was used to drive the thermoelectric cooler controller of the distributed feedback (DFB) laser. The internal amplifier acquired the feedback current of the temperature sensor. The proportional-integral-derivative parameters such as proportion, integration, and derivative were set by external resistors. The short- and long-term stability and linearity of the developed laser driver were tested using a DFB laser with a central wavelength of 6991 cm-1. The laser driver was validated for high-sensitivity gas sensing of CO2 and C2H2 via a laser absorption spectroscopy experiment. The limits of detection were less than 11.5 ppm and 0.124 ppm for CO2 and C2H2, respectively. Direct absorption measurements and the 1-f and 2-f demodulation signals confirmed the capabilities of the proposed laser driver system in high-sensitivity gas sensing applications. The driver unit can readily be accommodated into many portable laser sensing devices for industrial applications.

A novel fiber-optic current measurement instrument for high-power laser source

Interferometric Fiber-Optic Current Sensor

Optic Fiber Current Sensor Powered with Laser Energy

A Differential Compensated Air Coil Current Sensor for Switching Current Measurement of Power Devices.

Measurement of Electrical Current with Optic Fiber Technology

Research on Digital Optical Fiber Current Transformer with CT Power Supply

Study on Temperature and Current Sensors Based on Optical Driving Optical Fiber Transmission

Large bandwidth and dynamic range current sensor based on micro-PCB Rogowski coil

Optical Micro-current Transducer for the Measurement of Corona Discharge Current under High Voltage Environment

Research on optical fiber current transducer using nv center in diamond

Laser Frequency Noise Power Spectral Density Measurement Technology and Its Application to Resonant Optical Fiber Gyroscope

Optical fiber-based power and data delivery system for high voltage electronic current transformer

Novel Semiconductor Lasers and Integrated Photonic Devices

Note: an in Situ Method for Measuring the Non-Linear Response of a Fabry-Perot Cavity.

Design and simulation analysis of fiber optic current sensor using orbital angular momentum beam

A High-Performance Hybrid Current Transformer Based on a Fast Variable Optical Attenuator

Novel Fiber Optic Current Transformer With New Phase Modulation Method

Fiber-Optic Sensor for MA Current Measuring

A Portable Low-Power Integrated Current and Temperature Laser Controller for High-Sensitivity Gas Sensor Applications.

Practical Application of Optical Instrument Transducer Used for the Measurement of Rotor's Voltage and Current in Power Generator

Highly Stable and Precise Demodulation of an FBG-Based Optical Current Sensor Using a Dual-Loop Optoelectronic Oscillator