Abstract:Solid oxide electrochemical cell (SOC) is a highly promising alternative for fuel conversion and power-to-gas due to its high efficiency and low emission. However, degradation resulting from the electrolyte-electrode interface is a major challenge in both fuel cell mode and electrolysis mode. Here, a co-sintering tri-layer structure cell with nano composite oxygen electrode is developed to mitigate the interface issue. A 10 x 10 cm(2) NiO/YSZ lYSZ lYSZ-La0.6Sr0.4Co0.2Fe0.8O3-25 (LSCF) cell has been conducted under different fuels in SOFC mode. A power density output of 558 mW/cm(2) @0.7 V-800 degrees C in wet H-2 and a durability of 300 h in simulated syngas have been obtained. The performance of LSF, LSCF and SSC oxygen electrodes have been studied in both SOFC and SOEC modes. It suggests that three oxygen electrodes have an order of SSC > LSCF > LSF in electrochemical performance, and an opposite order in stability of SOEC. The degradation of the LSCF and SSC can be derived from the solid-state reactions at the interface between Co-containing perovskites and YSZ during operation. It demonstrates that GDC and Ag modification can enhance the oxygen elettro destability by impeding the soli state reactions and the nanoparticles sintering. Results suggest that GDC has a negative effect on the cell performance and Ag has a positive effect, implying that enhancing the electric conductivity of YSZ-LSCF is the key to improve the cell performance. Moreover, cell with YSZ-SFM/GDC has been applied in CH4 assisted SOEC process (CH4-SOEC), in which a significant reduction of electricity consume can be realized. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

The Effect Of Oxygen Transfer Mechanism On The Cathode Performance Based On Proton-Conducting Solid Oxide Fuel Cells

Development of A Novel Type of Composite Cathode Material for Proton-Conducting Solid Oxide Fuel Cells

Proton-Blocking Composite Cathode for Proton-Conducting Solid Oxide Fuel Cell

Enhancing chemical stability and performance in proton-conducting solid oxide fuel cells through novel composite cathode design

Fabrication and Study of LaNi0.6Fe0.4O3-δ and Sm0.5Sr0.5CoO3-δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

Enhancement of Electrochemical Performance for Proton Conductive Solid Oxide Fuel Cell by 30%GDC-LSCF Cathode

A comparative study on the composite cathodes with proton conductor and oxygen ion conductor for proton-conducting solid oxide fuel cell

Fabrication and Study of LaNi0.6Fe0.4O3-δ and Sm0.5Sr0.5CoO3-δ Composite Cathode

Investigation and Study of Three Different Composite Cathodes for Proton-Conducting Solid Oxide Fuel Cells

Optimization of BaZr0.1Ce0.7Y0.2O 3-δ-based proton-conducting solid oxide fuel cells with a cobalt-free proton-blocking La0.7Sr0.3FeO 3-δ-Ce0.8Sm0.2O2-δ composite cathode

A Highly Active Hybrid Catalyst Modified (La0.60sr0.40)0.95co0.20fe0.80o3-Δ Cathode for Proton Conducting Solid Oxide Fuel Cells

High Performance La0.5(Ba0.2Sr0.2Ca0.1)Co0.8Fe0.2O3-δ- BaZr0.1Ce0.7Y0.1Yb0.1O3-δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

Cathode Surface Segregating Modification for Boosting Oxygen Reduction Reactions: Coupling Theory and Experiment in Proton Conducting Solid Oxide Fuel Cells (H-SOFCs)

(La, Pr)0.8Sr0.2FeO3−–Sm0.2Ce0.8O2− Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

Preparation and Characterization of Ba0.5Sr0.5Fe0.9Ni0.1O3−δ–Sm0.2Ce0.8O1.9 Compose Cathode for Proton-Conducting Solid Oxide Fuel Cells

High performance and stability of nanocomposite oxygen electrode for solid oxide cells

High Performance Transition Metal Oxide Composite Cathode for Low Temperature Solid Oxide Fuel Cells

High Performance Yttria-Stabilized Zirconia Based Intermediate Temperature Solid Oxide Fuel Cells with Double Nano Layer Composite Cathode

Improved Performance of a Symmetrical Solid Oxide Fuel Cell by Swapping the Roles of Doped Ceria and La0.6Sr1.4MnO4+δ in the Electrode

Performance of Nd2NiO4+δ-Ce0.8Gd0.2O2-δ Composite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Boosting the Electrochemical Performance of Oxygen Electrodes Via the Formation of LSCF-BaCe0.9-xMoxY0.1O3-8 Triple Conducting Composite for Solid Oxide Fuel Cells: Part II