Multifunctional Polymer Composite With Excellent Shear Stiffening Performance And Magnetorheological Effect

Sheng Wang,Wanquan Jiang,Weifeng Jiang,Fang Ye,Ya Mao,Shouhu Xuan,Xinglong Gong

DOI: https://doi.org/10.1039/c4tc00903g

IF: 6.4

2014-01-01

Journal of Materials Chemistry C

Abstract:A novel multi-functional polymer composite with both excellent shear stiffening performance and magnetorheological effect has been synthesized.

What problem does this paper attempt to address?

Investigation on the "Magnetic-Mechanic" Coupling Performance of Magnetorheological Shear Stiffening Polymer Composite

Li-ping GONG,Sheng WANG,Guan-sheng YIN,Shou-hu XUAN

DOI: https://doi.org/10.7520/1001-4888-17-314

2017-01-01

Abstract:Shear stiffening gel is a novel intelligent material.Its modulus can increase rapidly due to external stress stimulation showing excellent shear stiffening effect,so it has important application prospects in physical protection and damping vibration isolation.In this paper,multifunctional magnetorheological shear stiffening polymer composite (MSC) is prepared by dispersing carbonyl iron (CI) into shear stiffening polymer matrix and its "magnetic-mechanic" coupling performance is systematically investigated by rheological testing system.Results indicate that MSC presents excellent shear stiffening effect (S-ST effect),its storage modulus increases significantly (4 orders of magnitude) with the increase of shear frequency.The mechanical properties of MSC were also enhanced dramatically by magnetic field,indicating its ideal magnetorheological effect.When the content of carbonyl iron powder is 60wt％,the modulus of the specimen increases rapidly with the increase of magnetic field,and the maximum modulus is up to 2.44MPa.More importantly,the storage modulus of MSC was largely enhanced and precisely controlled by changing shear force and magnetic field and it decreased with the increasing of shear strain.In addition,the temperature dependent mechanical properties of MSC were also studied and it could maintain stable mechanical performance at low temperature.Finally,the "magnetic mechanic" coupling mechanism was discussed.It is found that due to the formation of "B-O cross bond" and the CI particle chains induced by magnetic field,this composite presents excellent shear stiffening effect and magnetorheological properties.
Preparation of dual-stimuli-responsive shear stiffening polymer composite and study on its mechanic-magnetic coupling performance

Fang Yuan,Sheng Wang,Min Sang,Mei Liu,Linfeng Bai,Wanquan Jiang,Xinglong Gong

DOI: https://doi.org/10.1360/sspma2018-00111

2018-01-01

Abstract:A kind of innovative dual-stimuli-responsive shear stiffening polymer composite (DSR-SST) with excellent pre-magnetized enhanced (PME) effect and ideal adhesion properties was developed by dispersing NdFeB particles into shear stiffening (S-ST) polymer matrix. Owing to its S-ST characteristic, the storage modulus ( G′ ) of DSR-SST can increase from 102 Pa to 106 Pa when the shear frequency of applied stress varies from 0.1 to 100 Hz. Meanwhile, the stiffness of the multi-functional DSR-SST can also be precisely tunable by shear frequency and magnetic field. More importantly, DSR-SST with high remanence exhibits excellent PME effect in which the G′ can be directionally increased from 1.64 MPa to 2.34 MPa through 1200 mT of pre-magnetization process in short time. Additionally, the mechanism of high residual magnetization and the movement of NdFeB particle chains are proposed and discussed. Finally, the ideal cyclic stability, plastic and adhesive characteristics guarantee the composite with reliable mechanical performance and longer lifespan in safeguarding and damping.
Amphipathic engineering of magnetic composites reinforced with ion-copolymer-activated protein-bioconjugate functionalized surface

Zhiyong Guo,Guobin Huang,Chen Zhang,Qiuhong Yao,Tingxiu Ye,Li Zhang,Xi Chen

DOI: https://doi.org/10.1039/d1qm01354h

IF: 8.6834

2022-01-01

Materials Chemistry Frontiers

Abstract:Structurally stable, multifunctional ion-copolymer composites with enhanced ionic, hydrophilic and hydrophobic properties are developed utilizing multimodal materials.

materials science, multidisciplinary,chemistry
Additive effect of poly(N-methylaniline) coated Fe3O4 composite particles on carbonyl iron based magnetorheological fluid

Shizhao Wang,ChaeWon Park,Yong Ku Kwon,Hyoung-Joon Jin,Jin-Kyun Lee,Hyoung Jin Choi

DOI: https://doi.org/10.1088/1361-665x/ad46a0

IF: 4.1

2024-05-03

Smart Materials and Structures

Abstract:Poly(N-methylaniline) (PNMA) coated magnetite (Fe3O4) (PNMA@Fe3O4) composite particles synthesized through both chemical oxidative polymerization and chemical co-precipitation processes were used as a magnetic additive for carbonyl iron (CI)-based magnetorheological (MR) fluid. The effect of the additive's content on the rheological characteristics of the MR fluid in the presence of an externally applied magnetic field was studied along with its effect on the sedimentation ratio compared with that of CI-based MR fluid. Shear stress curves as a function of the shear rate of the CI-based MR fluids with the additive were found to be well-fitted by the Herschel–Bulkley equation and the slope of the dynamic yield stress was determined to be 2.0. The curves also showed yield stresses higher than those of the CI-based MR fluid for different magnetic field strengths. Specifically, the CI-based MR fluid with 1.0 wt% additive showed the highest yield stress and the best solid-like properties among the tested samples. Furthermore, the sedimentation issue for the CI-based MR fluid was found to improve significantly, especially for the lowest settling rate of the MR fluid with 1.0 wt% additive. The addition of 1.0 wt% PNMA@Fe3O4 additive resulted in the CI-based MR fluid exhibiting the best properties, owing to improved rheological features and a reduced sedimentation rate.

materials science, multidisciplinary,instruments & instrumentation
Strong Non-Volatile Voltage Control of Magnetization and the Magnetodielectric Properties in Polymer-Based Sandwich-Structured Composites

Yongping Pu,Jingwei Li,Xiaoying Wang,Yu Shi,Ruike Shi,Mengdie Yang,Wen Wang,Xu Guo,Xin Peng

DOI: https://doi.org/10.1016/j.compscitech.2019.107931

IF: 9.1

2019-01-01

Composites Science and Technology

Abstract:The polymer-based magnetoelectric composites were prepared by the tape-casting method. The poly(vinylidene fluoride)-BaTiO3/poly(vinylidene fluoride)-Sr2CoMoO6/poly(vinylidene fluoride)-BaTiO3(abbreviated as PVDF-BTO/PVDF-SCMO/PVDF-BTO) sandwich structured composites possess strong non-volatile voltage control of magnetization and magnetodielectric properties. It is interesting that the magnetization of the sandwich-structured composite film significantly changes by different poling field, which is possibly originated from the electron orbital reconstruction of Co induced by the interface bound charges. Meanwhile, the response of the dielectric performance under the applied magnetic field is also obvious, which exhibits a maximum negative magnetodielectric coefficient of 10.2%. Our results may provide a new way in the design of polymer-based multiferroic materials and show potential application for multiferroic materials.
Photothermal and magnetocaloric-stimulated shape memory and self-healing via magnetic polymeric composite with dynamic crosslinking

Fei Wang,Cheng Zhang,Anzhong Tan,Haiyun Chen,Sifan Weng,Qirong Xie,Chunmei Li,Zhixiong Cai,Xuejuan Wan

DOI: https://doi.org/10.1016/j.polymer.2021.123677

IF: 4.6

2021-05-01

Polymer

Abstract:Multiple-stimulated shape-memory and self-healing materials can be employed in some covert circumstances and special system because of the flexible control manners, which shows great potential in practical application. In this work, Fe3O4 grafted copolymer, Fe3O4-g-P(TMA-co-LA-co-VI), with magnetic, near-infrared light and thermo multiple-stimulated shape memory and self-healing performance, was synthesized, where tetrahydrofurfuryl methacrylate (TMA), lauryl acrylate (LA) and 1-vinylimidazole (VI) were biomass derived monomers. Dynamic metal-ligand network in Fe3O4-g-P(TMA-co-LA-co-VI)/Zn was subsequently constructed via the coordination of VI and zinc ion. The mechanical properties of the nanocomposite could be simply regulated by varying the Fe3O4 content and the molar ratio of monomers. Among all the samples, Fe3O4-g-P(TMA-co-LA-co-VI)/Zn with Fe3O4 content of 1 wt % and TMA/LA/VI molar ratio of 8/2/2.5 showed a breaking stain of 300% and a maximum stress of 1.66 MPa, which also showed an excellent thermo stimulated shape memory and self-healing performance. As the Fe3O4 nanoparticles were uniformly dispersed in the nanocomposites, their photothermal and magnetocaloric transformation can efficiently stimulate the dynamic and reversible metal-ligand crosslinked process between VI and Zn2+. Therefore, this kind of effective stimulation can finally lead to excellent remote-controllable shape memory and self-healing performance. The integration of magnetic, near-infrared light and thermo multiple-stimulation for shape memory and self-healing also augurs well for their wide application potential in artificial intelligence materials and life science.

polymer science
Dimorphic Magnetorheological Fluid with Improved Rheological Properties

Wanquan Jiang,Yanli Zhang,Shouhu Xuan,Chaoyang Guo,Xinglong Gong

DOI: https://doi.org/10.1016/j.jmmm.2011.07.024

IF: 3.097

2011-01-01

Journal of Magnetism and Magnetic Materials

Abstract:A type of dimorphic magnetorheological (MR) fluid was prepared by adding wire-like iron nanostructures into the conventional carbonyl iron based MR fluid. The Fe nanowires were synthesized through reducing Fe2+ ion with excessive sodium borohydride in aqueous solution. The rheological behaviors of the dimorphic MR fluids were measured with a rotational rheometer and the sedimentation properties were also studied in this work. It was found that the Fe wires additives can greatly enhance the stress strength of the dimorphic MR fluids comparing with the conventional MR fluids. The sedimentation of the dimorphic MR fluids was also mitigated greatly.
Rate-dependent and self-healing conductive shear stiffening nanocomposite: a novel safe-guarding material with force sensitivity

sheng wang,shouhu xuan,weifeng jiang,lixun yan,ya mao,mei liu,xinglong gong

DOI: https://doi.org/10.1039/C5TA06169E

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:A novel rate-dependent and self-healing conductive composite with well defined shear stiffening (S-ST) effect was facilely fabricated by dispersing the multi-walled carbon nanotube (MWCNT) into a shear stiffening polymer matrix.
Multifunctional magnetic soft composites: a review

Shuai Wu,Wenqi Hu,Qiji Ze,Metin Sitti,Ruike Zhao

DOI: https://doi.org/10.1088/2399-7532/abcb0c

2020-12-01

Multifunctional Materials

Abstract:Abstract Magnetically responsive soft materials are soft composites where magnetic fillers are embedded into soft polymeric matrices. These active materials have attracted extensive research and industrial interest due to their ability to realize fast and programmable shape changes through remote and untethered control under the application of magnetic fields. They would have many high-impact potential applications in soft robotics/devices, metamaterials, and biomedical devices. With a broad range of functional magnetic fillers, polymeric matrices, and advanced fabrication techniques, the material properties can be programmed for integrated functions, including programmable shape morphing, dynamic shape deformation-based locomotion, object manipulation and assembly, remote heat generation, as well as reconfigurable electronics. In this review, an overview of state-of-the-art developments and future perspectives in the multifunctional magnetically responsive soft materials is presented.

English Else
The Strengthening Effect of 1D Carbon Materials on Magnetorheological Plastomers: Mechanical Properties and Conductivity

Jiaqi Xu,Shouhu Xuan,Haoming Pang,Xinglong Gong

DOI: https://doi.org/10.1088/1361-665x/aa5bd6

IF: 4.1

2017-01-01

Smart Materials and Structures

Abstract:This work reported novel multifunctional carbon filler-doped magnetorheological plastomers (CMRPs) and their magnetic–mechanical–conductive coupling properties. Here, the one-dimensional carbon fillers, such as carbon micro-fibers (CFs), carbon nanotubes (CNTs) and their mixtures (CFs and CNTs) were dispersed into the matrix for the final product. It was found that the CMRPs with 7.5 wt% CFs and 0.5 wt% CNTs had an excellent magnetorheological (MR) effect (2200%) and magnetic field dependent electrical property. Specifically, the resistance was reduced by two orders of magnitude with the magnetic field increasing from 0 to 900 mT. Moreover, the relationship between resistance and strain was also discovered. The resistance increased by three orders of magnitude due to the amplitude of oscillation, which was 10% in the absence of the magnetic field, while the resistance would decrease by three orders of magnitude under a 900 mT magnetic field. The variation range of the resistance increased with the increasing oscillation amplitude, and the period of the resistance was half of the period of the strain. To conclude, the possible mechanism for the multifunctional properties was discussed.
Preparation of superparamagnetic Fe3O4/PMMA nano composites and their magnetorheological characteristics

Zhen Cao,Wanquan Jiang,Xingzhu Ye,Xinglong Gong

DOI: https://doi.org/10.1016/j.jmmm.2007.12.007

IF: 3.097

2008-01-01

Journal of Magnetism and Magnetic Materials

Abstract:Fe3O4/PMMA composite particles were fabricated by a simple one-pot hydrothermal method. The magnetic measurement showed that the composite particles displayed a higher saturated magnetization and superparamagnetic property. The rheological properties of the magnetorheological fluids (MRFs) based on Fe3O4/PMMA particles were measured on a rotational rheometer with a magnetic field generator. It was found that the MRFs exhibited better MR effect and sendimentary stability than the similar materials.
MEMS structure with tunable stiffness using the magnetorheological effect

Fu-Ming Hsu,Guang-Yu Liu,Weileun Fang

DOI: https://doi.org/10.1109/MEMSYS.2013.6474163

2013-01-01

Abstract:This study presents a novel polymer MEMS structure with Fe3O4-glycerol fill-in. Thus, the concept of magnetorheological effect is exploited to increase the stiffness of polymer MEMS structure by applying a magnetic field. The stiffness enhancement by magnetic field is achieved through the following mechanisms: (1) distribution of the Fe3O4 particles in glycerol would change from isotropic to anisotropic, and (2) the attraction between the aligned Fe3O4 particles. Note the stiffness of structure could also be reduced by varying the direction of magnetic field. In applications, parylene beams with Fe3O4-glycerol fill-in have been fabricated and tested. Preliminary results show the critical buckling loads of beams increase from 0.6gw to 1.5gw (1% fill-in), 0.78gw to 2.3gw (3.8% fill-in), and 0.78gw to 2.6gw (5 % fill-in) by 5mT magnetic field. The resonant frequency of beam is reduced for 1.2 kHz in as magnetic field applied in x-direction. However, the resonant frequency of beam decreased for 2-3.3% as the magnetic field applied at y-and z-directions.
Mechanical and structural investigation of isotropic and anisotropic thermoplastic magnetorheological elastomer composites based on poly(styrene-b-ethylene-co-butylene-b-styrene) (SEBS)

Xiushou Lu,Xiuying Qiao,Hiroshi Watanabe,Xinglong Gong,Tao Yang,Wei Li,Kang Sun,Meng Li,Kang Yang,Hongen Xie,Qi Yin,Dong Wang,Xiaodong Chen

DOI: https://doi.org/10.1007/s00397-011-0582-x

2012-01-01

Rheologica Acta

Abstract:Novel smart thermoplastic magnetorheological elastomer composites containing micron-sized magnetic carbonyl iron (CI) particles were prepared with a poly(styrene-ethylene-butylene-styrene) (SEBS) triblock copolymer utilized as the thermoplastic matrix rubber, and the structures and properties of the CI-SEBS composites were examined. The CI particles were uniformly dispersed in the composites prepared in the absence of the magnetic field at high temperatures T (>T\(_{\rm g}^{\rm S})\), and this isotropic composite exhibited a larger storage modulus G′ compared to the SEBS matrix at room temperature (< <T\(_{\rm g}^{\rm S})\) where the EB phase therein was rubbery while the PS phase was in the glassy state. In contrast, the SEBS composite prepared under the magnetic field (with the intensity ψ < 2.5 T) at high T (>T\(_{\rm g}^{\rm S})\) contained a chain structure of CI particles. This chain structure became longer and better aligned on an increase of ψ up to a saturation of the particle magnetization and on an increase of the time interval of applying the field (that allowed the particles to move and equilibrate their aligned structure). The modulus G′ of this “pre-structured” composite measured for both cases of ψ = 0 and ψ > 0 in the direction perpendicular to the chain structure at room temperature was enhanced compared to G′ of the isotropic composites. This difference of the filler effect (for ψ = 0) and the magnetorheological effect (for ψ > 0) between the pre-structured and isotropic composites was enhanced when the chain structure of the CI particles in the pre-structured composites became longer and better aligned. A mechanism(s) of this enhancement was discussed in relation to the morphologies (particle distribution) in the composites with the aid of a filler model and a molecular expression of the stress due to magnetically interacting particles.
Microstructure and magnetorheological properties of the thermoplastic magnetorheological elastomer composites containing modified carbonyl iron particles and poly(styrene-b-ethylene-ethylenepropylene-b-styrene) matrix

Weihua Li,Xiuying Qiao,Xiushou Lu,Jun Chen,Xinglong Gong,Tao Yang,Kang Sun,Xiaodong Chen,Wei Li

DOI: https://doi.org/10.1088/0964-1726/21/11/115028

IF: 4.1

2012-01-01

Smart Materials and Structures

Abstract:Novel isotropic and anisotropic thermoplastic magnetorheological elastomers (MRE) were prepared by melt blending titanated coupling agent modified carbonyl iron (CI) particles with poly(styrene-b-ethylene-ethylene-propylene-b-styrene) (SEEPS) matrix in the absence and presence of a magnetic field, and the microstructure and magnetorheological properties of these SEEPS-based MRE were investigated in detail. The particle surface modification improves the dispersion of the particles in the matrix and remarkably softens the CI/SEEPS composites, thus significantly enhancing the MR effect and improving the processability of these SEEPS-based MRE. A microstructural model was proposed to describe the interfacial compatibility mechanism that occurred in the CI/SEEPS composites after titanate coupling agent modification, and validity of this model was also demonstrated through adsorption tests of unmodified and surface-modified CI particles.
High Performance Magnetorheological Elastomers Strengthened by Perpendicularly Interacted Flax Fiber and Carbonyl Iron Chains

Quan Shu,Li Ding,Xinglong Gong,Tao Hu,Shouhu Xuan

DOI: https://doi.org/10.1088/1361-665x/ab5e49

IF: 4.1

2020-01-01

Smart Materials and Structures

Abstract:This work reported a novel high performance flax fiber (FF) strengthened magnetorheological elastomer (FF-MRE), whose mechanical property was improved by the unique three-dimension (3D) topologic strengthening structure composed of flax fiber and perpendicular carbonyl iron particles (CIPs) chains. Both the tensile and shear properties of this polydimethylsiloxane (PDMS) based FF-MRE were obviously influenced by the content of CIPs and flax fiber layers. In comparison to the anisotropic pure MRE, the tensile strength of FF-MRE with two layers of flax fiber increased as high as 87%. Importantly, when the content of the CIPs was kept at 70 wt%, the magnetorheological (MR) effect reached 184%. It was found that the CIPs chains were vertical to the flax fiber and the crosslink 3D topologic structure strengthened the PDMS matrix. Under the external magnetic field, the relative MR effect increased with increasing of the magnetic dipole-dipole interaction. Due to the enhanced stretch-ability, a flexible and magnetocontrollable gripper was developed based on the flax fiber strengthened MRE, which demonstrated a delicate activity on actuation. This material is expected to have broad potential in active control and intelligent actuator.
Stretchable Polyurethane Sponge Scaffold Strengthened Shear Stiffening Polymer and Its Enhanced Safeguarding Performance.

Sheng Wang,Shouhu Xuan,Yunpeng Wang,Chenhui Xu,Ya Mao,Mei Liu,Linfeng Bai,Wanquan Jiang,Xinglong Gong

DOI: https://doi.org/10.1021/acsami.5b12083

IF: 9.5

2016-01-01

ACS Applied Materials & Interfaces

Abstract:A simple and scalable "dip and dry" method was developed for fabricating stretchable polyurethane sponge-based polymer composite with excellent shear stiffening effect, creep resisting and adhesion property. The stiffness of the composite was tunable, the storage modulus (G') could automatically increase 3 orders of magnitude with the increasing of shear frequency, and the G'max could reach to as high as 1.55 MPa. Importantly, the composite with ideal damping capacity reduced the impact force by 2 orders of magnitude even under 26 cycles of consecutive dynamic impact loading with no obvious mechanical degradation. Moreover, an enhancing mechanism was proposed and it was found the "B-O cross bond" and the entanglement of polymer chains were attributed to the shear stiffening characteristic. Finally, the excellent adhesion ability and hydrophobicity guarantee the composite with reliable mechanical performance and longer lifespan.
Nonlinear Magneto-Electro-Mechanical Response of Physical Cross-Linked Magneto-Electric Polymer Gel

Xiwen Fan,Yu Wang,Bochao Wang,Longjiang Shen,Jun Li,Zhenbang Xu,Sheng Wang,Xinglong Gong

DOI: https://doi.org/10.3389/fmats.2021.665814

2021-01-01

Frontiers in Materials

Abstract:This work reports on a novel magnetorheological polymer gel with carbon nanotubes and carbonyl iron particles mixed into the physical cross-linked polymer gel matrix. The resulting composites show unusual nonlinear magneto-electro-mechanical responses. Because of the low matrix viscosity, effective conductive paths formed by the CNTs were mobile and high-performance sensing characteristics were observed. In particular, due to the transient and mutable physical cross-linked bonds in the polymer gel, the electromechanical behavior acted in a rate-dependent manner. External stimulus at a high rate significantly enhanced the electrical resistance response during mechanical deformation. Meanwhile, the rheological properties were regulated by the external magnetic field when magnetic particles were added. This dual enhancement mechanism further contributes to the active control of electromechanical performance. These polymer composites could be adopted as electromechanical sensitive sensors to measure impact and vibration under different frequencies. There is great potential for this magnetorheological polymer gel in the application of intelligent vibration controls.
A high-performance magnetorheological material: Preparation, characterization and magnetic-mechanic coupling properties

Yangguang Xu,Xinglong Gong,Shouhu Xuan,Wei Zhang,Yanceng Fan

DOI: https://doi.org/10.1039/c1sm05301a

IF: 4.046

2011-01-01

Soft Matter

Abstract:A novel high-performance magnetorheological material, named as magnetorheological plastomer (MRP), was developed by dispersing iron particles into a plastic polyurethane (PU) matrix. The dynamic properties (including storage modulus and loss factor) of the MRP material were systematically tested and the influences of the iron particle content and magnetic field were analyzed. It is found that the anisotropic MRP product with 80% iron particle weight fraction (A-MRP-80), shows a high dynamic property: the maximum magneto-induced storage modulus is 6.54 MPa; the relative MR effect reaches as high as 532%; the loss factor can be reduced to 0.03 by adjusting magnetic field. This kind of MRP shows a much higher magnetorheological performance than the previously reported magnetorhelogical elastomer (MRE). The mechanism for its high MR performance was proposed and the influence of the iron particle distribution and temperature on the dynamic properties were discussed.
Dual Nanofillers Reinforced Polymer-Inorganic Nanocomposite Film with Enhanced Mechanical Properties

Boxiang Peng,Qin Li,Bing Yu,Jiahao Zhang,Sijie Yang,Ruijie Lu,Xia Sun,Xiaojie Li,Yin Ning

DOI: https://doi.org/10.1002/smll.202406160

IF: 13.3

2024-09-06

Small

Abstract:Simultaneously improving the strength and toughness of polymer-inorganic nanocomposites is highly desirable but remains technically challenging. Herein, a simple yet effective pathway to prepare polymer-inorganic nanocomposite films that exhibit excellent mechanical properties due to their unique composition and structure is demonstrated. Specifically, a series of poly(methacrylic acid)x-block-poly(benzyl methacrylate)y diblock copolymer nano-objects with differing dimensions and morphologies is prepared by polymerization-induced self-assembly (PISA) mediated by reversible addition-fragmentation chain transfer polymerization (RAFT). Such copolymer nano-objects and ultrasmall calcium phosphate oligomers (CPOs) are used as dual fillers for the preparation of polymer-inorganic composite films using sodium carboxymethyl cellulose (CMC) as a matrix. Impressively, the strength and toughness of such composite films are substantially reinforced as high as up to 202.5 ± 14.8 MPa and 62.3 ± 7.9 MJ m-3, respectively. Owing to the intimate interaction between the polymer-inorganic interphases at multiple scales, their mechanical performances are superior to most conventional polymer films and other nanocomposite films. This study demonstrates the combination of polymeric fillers and inorganic fillers to reinforce the mechanical properties of the resultant composite films, providing new insights into the design rules for the construction of novel hybrid films with excellent mechanical performances.
Poly(methyl Methacrylate)‐coated Carbonyl Iron Particles and Their Magnetorheological Characteristics

Wanquan Jiang,Hong Zhu,Chaoyang Guo,Jianfeng Li,Qun Xue,Jianghua Feng,Xinglong Gong

DOI: https://doi.org/10.1002/pi.2794

IF: 3.213

2010-01-01

Polymer International

Abstract:Magnetorheological fluids (MRFs) are types of suspensions that contain magnetic particles and a carrier fluid, and are considered as semi-active smart materials. By tuning the strength of an external magnetic field, like other traditional MRFs, a carbonyl iron (CI)-poly(methyl methacrylate) (PMMA) particle-based MRF can change reversibly from a fluid-like state to a solid-like state within milliseconds. In the research reported, Cl particles were encapsulated with PMMA via emulsion polymerization. After the polymerization, the fabricated CI-PMMA composite particles were dispersed in a suspension medium to prepare MRF. The synthesized CI-PMMA composite particle-based MRF showed a shear stress of 60 kPa at the magnetic field strength of 0.6 T, and a greatly enhanced anti-sedimentation stability. (C) 2010 Society of Chemical Industry

Multifunctional Polymer Composite With Excellent Shear Stiffening Performance And Magnetorheological Effect

Investigation on the "Magnetic-Mechanic" Coupling Performance of Magnetorheological Shear Stiffening Polymer Composite

Preparation of dual-stimuli-responsive shear stiffening polymer composite and study on its mechanic-magnetic coupling performance

Amphipathic engineering of magnetic composites reinforced with ion-copolymer-activated protein-bioconjugate functionalized surface

Additive effect of poly(N-methylaniline) coated Fe3O4 composite particles on carbonyl iron based magnetorheological fluid

Strong Non-Volatile Voltage Control of Magnetization and the Magnetodielectric Properties in Polymer-Based Sandwich-Structured Composites

Photothermal and magnetocaloric-stimulated shape memory and self-healing via magnetic polymeric composite with dynamic crosslinking

Dimorphic Magnetorheological Fluid with Improved Rheological Properties

Rate-dependent and self-healing conductive shear stiffening nanocomposite: a novel safe-guarding material with force sensitivity

Multifunctional magnetic soft composites: a review

The Strengthening Effect of 1D Carbon Materials on Magnetorheological Plastomers: Mechanical Properties and Conductivity

Preparation of superparamagnetic Fe3O4/PMMA nano composites and their magnetorheological characteristics

MEMS structure with tunable stiffness using the magnetorheological effect

Mechanical and structural investigation of isotropic and anisotropic thermoplastic magnetorheological elastomer composites based on poly(styrene-b-ethylene-co-butylene-b-styrene) (SEBS)

Microstructure and magnetorheological properties of the thermoplastic magnetorheological elastomer composites containing modified carbonyl iron particles and poly(styrene-b-ethylene-ethylenepropylene-b-styrene) matrix

High Performance Magnetorheological Elastomers Strengthened by Perpendicularly Interacted Flax Fiber and Carbonyl Iron Chains

Stretchable Polyurethane Sponge Scaffold Strengthened Shear Stiffening Polymer and Its Enhanced Safeguarding Performance.

Nonlinear Magneto-Electro-Mechanical Response of Physical Cross-Linked Magneto-Electric Polymer Gel

A high-performance magnetorheological material: Preparation, characterization and magnetic-mechanic coupling properties

Dual Nanofillers Reinforced Polymer-Inorganic Nanocomposite Film with Enhanced Mechanical Properties

Poly(methyl Methacrylate)‐coated Carbonyl Iron Particles and Their Magnetorheological Characteristics