Abstract:Novel smart thermoplastic magnetorheological elastomer composites containing micron-sized magnetic carbonyl iron (CI) particles were prepared with a poly(styrene-ethylene-butylene-styrene) (SEBS) triblock copolymer utilized as the thermoplastic matrix rubber, and the structures and properties of the CI-SEBS composites were examined. The CI particles were uniformly dispersed in the composites prepared in the absence of the magnetic field at high temperatures T (>T\(_{\rm g}^{\rm S})\), and this isotropic composite exhibited a larger storage modulus G′ compared to the SEBS matrix at room temperature (< <T\(_{\rm g}^{\rm S})\) where the EB phase therein was rubbery while the PS phase was in the glassy state. In contrast, the SEBS composite prepared under the magnetic field (with the intensity ψ < 2.5 T) at high T (>T\(_{\rm g}^{\rm S})\) contained a chain structure of CI particles. This chain structure became longer and better aligned on an increase of ψ up to a saturation of the particle magnetization and on an increase of the time interval of applying the field (that allowed the particles to move and equilibrate their aligned structure). The modulus G′ of this “pre-structured” composite measured for both cases of ψ = 0 and ψ > 0 in the direction perpendicular to the chain structure at room temperature was enhanced compared to G′ of the isotropic composites. This difference of the filler effect (for ψ = 0) and the magnetorheological effect (for ψ > 0) between the pre-structured and isotropic composites was enhanced when the chain structure of the CI particles in the pre-structured composites became longer and better aligned. A mechanism(s) of this enhancement was discussed in relation to the morphologies (particle distribution) in the composites with the aid of a filler model and a molecular expression of the stress due to magnetically interacting particles.

Microstructure and magnetorheological properties of the thermoplastic magnetorheological elastomer composites containing modified carbonyl iron particles and poly(styrene-b-ethylene-ethylenepropylene-b-styrene) matrix

Effect of carbonyl iron concentration and processing conditions on the structure and properties of the thermoplastic magnetorheological elastomer composites based on poly(styrene- b -ethylene-co-butylene- b -styrene) (SEBS)

Preparation, Structure and Properties of SEEPS-based Thermoplastic Magnetorheological Elastomer Composites

Mechanical and structural investigation of isotropic and anisotropic thermoplastic magnetorheological elastomer composites based on poly(styrene-b-ethylene-co-butylene-b-styrene) (SEBS)

Analysis of Styrene-Butadiene Based Thermoplastic Magnetorheological Elastomers with Surface-Treated Iron Particles

Experimental and theoretical investigation on magnetorheological elastomers containing carbonyl iron particles coated with silane coupling agent

Investigation of the Effect of Carbonyl Iron Micro-Particles on the Mechanical and Rheological Properties of Isotropic and Anisotropic MREs: Constitutive Magneto-Mechanical Material Model

Influence of particles size and concentration of carbonyl iron powder on magnetorheological properties of silicone rubber-based magnetorheological elastomer

Influence of particle coating on dynamic mechanical behaviors of magnetorheological elastomers

The Study of Magnetorheological Elastomer Based on Natural Rubber (NR)/Thermoplastic Elastomer SEBS Hybrid Matrix: Experimental and Numerical Simulation

Silicon Carbide-Strengthened Magnetorheological Elastomer: Preparation and Mechanical Property

Experimental Study and Mathematical Modeling of Magnetorheological Elastomers Considering Molecular Chain Network and Temperature Influence

A Study of the Heat Transfer Properties of CIP Doped Magnetorheological Elastomers

The study of enhancement of magnetorheological effect based on natural rubber/thermoplastic elastomer SEBS hybrid matrix

Preparation and Characterization of Magnetorheological Elastomers Based on Natural Rubber

Anisotropic polyurethane magnetorheological elastomer prepared through in situ polycondensation under a magnetic field

Effect of MXene nanosheets attached to carbonyl iron microspheres on the performance and stability of magnetorheological fluid

Preparation and Mechanical Properties of the Magnetorheological Elastomer Based on Natural Rubber/Rosin Glycerin Hybrid Matrix

Investigation on magnetorheological elastomers based on natural rubber

Experimental and modeling investigations on the quasi-static compression properties of isotropic silicone rubber-based magnetorheological elastomers under the magnetic fields ranging from zero to saturation field

Poly(methyl Methacrylate)‐coated Carbonyl Iron Particles and Their Magnetorheological Characteristics