Abstract:An in-situ measurement system for porous alumina (PA) film based on atomic force microscope (AFM) in liquid and reflectometric interference spectroscopy (RIFS) was developed. The present article briefly discusses the principle and structure of the system, and introduces its unique characteristic. The system consists of probe unit, XY scanner, Z-piezo feedback system, computer and software, fiber optic spectrometer, anodization control circuitry etc. When a white light beam illuminates the surface of the film, the reflective light beams at the front and back side of the layer are coherent, and lead to periodical amplifications and extinction in the reflective spectrum with the information of the optical thickness of the film. A fiber optic spectrometer was applied in the system which input the refractive spectrum into the computer by which the optical thickness of the film was calculated. Meanwhile according to the surface topography of PA films by AFM in liquid, the effective refractive index was calculated based on Maxwell-Garnett theory and coherent potential approximation (CPA). So the thickness of PA films could be gained at last. To checkout the feasibility and stability of the system, the real-time scanning and thickness measurement experiments were done during anodization of Al sheets in oxalic acid aqueous solution. In the experiment, the authors used 25 mm diameter aluminum (Al) sheets with 99.999% purity and 0.4 mm thickness as the anode, and graphite rod as the cathode. The pretreatment-cleaned Al sheets were anodized in an aqueous solution of 0.5 mol x L(-1) oxalic acid at the constant temperature (20 +/- 0.2) degrees C with 20 mA x cm(-2) anodization electronic current density. Real-time AFM images of PA film were successfully obtained during anodization. The pore-ratios of Al sheet were 7.81% and 13.83% at oxidizing time 150 min and 180 min respectively. Correspondingly, the effective indexes were calculated to be 1.62 and 1.60, respectively. Combining the reflective spectrum gained by the fiber optic spectrometer, the wave number differences between the two adjacent extrema were 57.69 mm(-1) and 50.00 mm(-1). Based on reflectometric interference spectroscopy, the thickness of PA films was found to be 5.35 and 6.25 microm with oxidizing time 150 min and 180 min respectively. The system has characteristics of convenient manipulation, non-destructive and high-resolution in-situ measurement. And the surface morphology, pore-ratio and effective refractive index can also be gained at the same time.

Interference color of anodized aluminum oxide (AAO) films for sensor application

A Non-Enzymatic Uric Acid Sensor Utilizing Ion Channels in the Barrier Layer of a Porous Anodic Alumina Membrane

Evolution of Magnetic and Transport Properties in Pore-Modified Coalo Antidot Arrays

Color-tuning method by filling porous alumina membrane using atomic layer deposition based on metal-dielectric-metal structure.

Easy preparation of anodic aluminum oxide photonic crystal films with tunable structural colors

Pore diameter-dependence photoluminescence spectra for porous anodized aluminum oxide membranes fabricated in different acid solutions

Childhood trauma history differentiates amygdala response to sad faces within MDD.

Autophagy promotes caspase-dependent cell death during Drosophila development

Fabrication and application of nanoporous anodic aluminum oxide: a review

A Study of Color Modulation of Porous Alumina Processed by Physical Vapor Deposition

Preparation of Highly Ordered Anodic Aluminum Oxide Membranes with Wide-Range Tunable Pore Intervals in Mixed Electrolytes

Study of In-Situ Measurement System for Porous Alumina Film Based on AFM and Reflectometric Interference Spectroscopy

A Controllable and Widely Applicable Electrochemical Anodization Process to Fabricate Porous Anodic Aluminum Oxide Membrane

Research on variation in nanopore parameters and surface characteristics of anodic aluminum oxide (AAO) films with time-controlled anodization processes

Facile Fabrication of Ordered Anodized Aluminum Oxide Membranes with Controlled Pore Size by Improved Hard Anodization

Anodizing aluminum in a viscous electrolyte to produce one-dimensional photonic crystals

Influence of anodization parameters on film thickness and volume expansion of thick- and large-sized anodic aluminum oxide film

Review of porous anodic aluminium oxide (AAO) applications for sensors, MEMS and biomedical devices

A Method of Color Modulation Based on Porous Alumina and Atomic Layer Deposition

Formation behavior of anodizing films on various aluminum alloys in oxalic acid solution

Effect of substrate temperature and electrolyte composition on the fabrication of through-hole porous AAO membrane with SF-MDC