Abstract:A low-resistivity titanium silicide (TiSi 2 ) is crucial as a gate and source/drain material in microelectronic device fabrication, offering notable properties to enhance device performance. This study aims to experimentally determine the optimum process parameters, including arsenic doping dosage, titanium thickness, and two-step rapid thermal process (RTP) temperature, for the sheet resistance of titanium self-aligned silicide process using a design of experiment methodology. The results demonstrate that both the thickness of the titanium and the temperature of the RTP play crucial roles in determining the sheet resistance of TiSi 2 . Statistical analysis reveals that increasing the titanium thickness or the temperature of the first-step RTP (RTP-1) could reduce the sheet resistance. Additionally, an optimal second-step RTP (RTP-2) temperature is critical to yield low-resistivity TiSi 2 by completely converting C49- to C54-phase. The optimum process conditions for obtaining low sheet resistance are a titanium thickness of 32-35 nm, RTP-1 temperature of 720-750°C for 75 s, and RTP-2 temperature of 860°C for 20 s. Moreover, surface amorphization of the polysilicon by arsenic ion implantation before the deposition of Ti/TiN films also plays a crucial role in the formation of C54-TiSi 2 . The lowest sheet resistance achieved was 3.91 Ω/sq with an arsenic dosage of 1 × 10 14 cm -2 . The optimum condition was adopted for forming a submicron polysilicon gate, providing a promising approach for designing the process parameters for titanium self-aligned silicide formation to achieve low resistance in nanoscale electronic devices.

A Novel Low Temperature Self-Aligned Ti Silicide Technology for Sub-0.18 Μm CMOS Devices

Advanced silicide for sub-0.18 /spl mu/m CMOS on ultra-thin (35 /spl mu/m) SOI

Ni Silicide and Ni Germanosilicide Self-Aligned Process for 65nm and Beyond CMOS Technology by 2-Step Rapid Thermal Annealing

A self-aligned silicide technology with the Mo/Ti bilayer system

Low Contact Resistivity of Ti/TiN/Al for NiSi2 on Epitaxial Si:P Structure at Full Low-Temperature Process below 450 °C

Process optimization of titanium self-aligned silicide formation through evaluation of sheet resistance by design of experiment methodology

Novel Sandwich Structure for Aluminum Induced Crystallization of Amorphous Silicon Thin Films at Low Temperature

Self-aligned Silicides for Ohmic Contacts in Complementary Metal–oxide–semiconductor Technology: TiSi2, CoSi2, and NiSi

Understanding Solid-State Interactions: Ultrathin Ni1-xPtx Silicide Films Formed on Si(100)

Ti and NiPt/Ti Liner Silicide Contacts for Advanced Technologies

C54-TiSi 2 FORMATION USING NANOSECOND LASER ANNEALING OF A-Si/Ti/A-Si STACKS

Schottky Contact Property and Annealing Condition of Titanium Silicides in VLSI

Characterization of a Self-Aligned RTP Titanium Disilicide MOS Process: Titanium-Silicon Dioxide Interaction

Surface-Morphology Study of Titanium Silicide Formed on Polycrystalline Silicon

Low-resistive and homogenous NiPt-silicide formation using ultra-low temperature annealing with microwave system for 22nm-node CMOS and beyond

Design on Formation of Nickel Silicide by a Low‐Temperature Pulsed Laser Annealing Method to Reduce Contact Resistance for CMOS Inverter and 6T‐SRAM on a Wafer‐Scale Flexible Substrate

A Low Temperature Silicon‐on‐Insulator Fabrication Process Using Si MBE on Double‐Layer Porous Silicon

Novel metal silicide materials for nanometer scale CMOS technology

Schottky barrier height tuning of silicides on p-type Si (100) by aluminum implantation and pulsed excimer laser anneal

Linear Growth of Ni2si Thin Film on N+/P Junction at Low Temperature

Self-aligned Formation of Superconducting Sub-5 Nm PtSi Films