Abstract:Perfluorosulfonic acid (PFSA) ionomers and their composites are popular electrolyte materials for proton exchange membrane fuel cells (PEMFCs), which subject to the combined actions associated with humidity change, temperature cycling, and clamp force during long-time operation. Thus, their time-related mechanical behaviour can greatly affect their proton conductivity and material degradation. Because viscosity is a vital factor controlling the mechanical deformation in the entire life cycle of a material, it is important to accurately predict for guiding the structural designation and operation condition. Currently, most of the literature discusses the PFSA viscosity based on large-strain-rate experiments. Microscopic driving mechanisms and macroscopic responses to small strain rates that occur during PEMFC operation remain largely unclear. In this study, the characterises of PFSA viscosity were investigated in terms of molecular interactions and macroscopic rheological behaviour. A cross-scale model was developed to describe the shear thinning phenomenon to obtain a zero-shear viscosity, which captures the linear viscous behaviour for small strain rates. Subsequently, a modified generalised Maxwell model consisting of elastic-plastic elements and zero-shear viscosity-dependent viscous elements was proposed and calibrated by the tensile and stress relaxation experiments for Nafion 117 membranes. In addition, the proposed visco-elastoplastic model, after validated by small-strain rate experiments, was used to investigate the response to cyclic loading during start-up and shutdown, which provides insights on the mechanical damage due to the hydrothermal cycles.

Systematic Stability Investigation of Perfluorosulfonic Acid Membranes with Varying Ion Exchange Capacities for Fuel Cell Applications

Aspects of the Chemical Degradation of Pfsa Ionomers Used in Pem Fuel Cells

A Kinetic Model for the Chemical Degradation of Perfluorinated Sulfonic Acid Ionomers: Weak End Groups Versus Side Chain Cleavage

Mechanical behavior of a hydrated perfluorosulfonic acid membrane at meso and nano scales

High-temperature low-humidity proton exchange membrane with "stream-reservoir" ionic channels for high-power-density fuel cells

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Evaluating the Durability of Perfluorosulfonic Acid Membranes in Fuel Cells Using Combined Open-Circuit Voltage-Accelerated Stability Testing

New directions in perfluoroalkyl sulfonic acid–based proton-exchange membranes

Viscosity mechanism of perfluorosulfonic acid-based materials and their application in proton exchange membrane fuel cells

Ion-Exchange Strategy Enabling Direct Reformation of Unreliable Perfluorinated Cationic Polymer for Robust Proton Exchange Membrane towards Hydrogen Fuel Cells

Reinforced Composite Membranes Based on Expanded Polytetrafluoroethylene Skeletons Modified by a Surface Sol–Gel Process for Fuel Cell Applications

Transport Properties of PFSAmembranes with Various Ion Exchange Capacities for Direct Methanolfuelcell Application

Novel Fluorinated Anion Exchange Membranes Based on Poly(Pentafluorophenyl‐Carbazole) with High Ionic Conductivity and Alkaline Stability for Fuel Cell Applications

High flexible ether-free semi-crystalline fuel cell membranes: Molecular-level design, assembly structure and properties

Structural and transport properties of ultrathin perfluorosulfonic acid ionomer film in proton exchange membrane fuel cell catalyst layer: A review

Fluorinated poly(p-triphenylene isatin) anion exchange membranes based on hydrophilic hydroxyl side chain modulation for fuel cells

Decisive Effect of Hydrophobic Rigid-Flexible Coupled Side Chains of Polycarbazoles on the Performance of Anion Exchange Membranes for Fuel Cells

Stability Challenge in Anion Exchange Membrane for Fuel Cells

Fluorinated poly(p-triphenyl piperidine) anion exchange membranes with robust dimensional stability for fuel cells

Study on Control of Polymeric Architecture of Sulfonated Hydrocarbon-Based Polymers for High-Performance Polymer Electrolyte Membranes in Fuel Cell Applications

In Situ Growth of COF on PAN Nanofibers to Improve Proton Conductivity and Dimensional Stability in Proton Exchange Membranes