Abstract:Abstract Excessive swelling is one important factor that leads to high fuel permeability and limited operating concentration of methanol for proton exchange membranes. Herein, a collaborative strategy of main‐chain and molecular‐network engineering is applied to lower swelling ratio and improve methanol resistance for highly sulfonated polyimide. Two m ‐phenylenediamine monomers (4‐(2,3,5,6‐tetrafluoro‐4‐vinylphenoxy)benzene‐1,3‐diamine and 4,6‐bis(2,3,5,6‐tetrafluoro‐4‐vinylphenoxy)benzene‐1,3‐diamine) with tetrafluorostyrol groups are designed and synthesized. Two series of cross‐linked sulfonated polyimides (CSPI‐Ts, CSPI‐Bs) are prepared from the two diamines, 4,4′‐diaminostilbene‐2,2′‐disulfonic acid and 1,4,5,8‐naphthalenetetracarboxylicdianhydride. The rigid main‐chain structure is cornerstone for wet CSPI‐Ts and CSPI‐Bs remaining stable at elevated temperatures. The introduction of hydrophobic cross‐linked network further improves their dimensional stability and methanol resistance. CSPI‐Ts and CSPI‐Bs show obviously improved performances containing high proton conductivity (121 ± 0.27–158 ± 0.35 S cm −1 ), low swelling ratio (9.6 ± 0.40%–16.1 ± 0.01%) and methanol permeability (4.14–7.69 × 10 −7 cm 2 s −1 ) at 80 °C. The direct methanol fuel cell (DMFC) is assembled from CSPI‐T‐10 with balanced properties, and it exhibits high maximum power density (PD max ) of 82.3 and 72.6 mW cm −2 in 2 and 10 m methanol solution, respectively. The ratio of PD max in 10 m methanol solution to the value in 2 m methanol solution is as high as 88%. The CSPI‐T‐10 is promising proton exchange membrane candidate for DMFC application.

Transport Properties of PFSAmembranes with Various Ion Exchange Capacities for Direct Methanolfuelcell Application

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Aspects of the Chemical Degradation of Pfsa Ionomers Used in Pem Fuel Cells

Proton exchange membranes based on sulfonated polybutylene fumarate: Preparation and characterization

Structural and transport properties of ultrathin perfluorosulfonic acid ionomer film in proton exchange membrane fuel cell catalyst layer: A review

High-temperature low-humidity proton exchange membrane with "stream-reservoir" ionic channels for high-power-density fuel cells

New Proton Exchange Membranes Based on Poly (vinyl Alcohol) for Dmfcs

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Crosslinked Hybrid Membranes Based On Sulfonated Poly(Ether Ether Ketone)/Gamma-Methacryloxypropyltrimethoxysilane/Phosphotungstic Acid By An In Situ Sol-Gel Process For Direct Methanol Fuel Cells

New directions in perfluoroalkyl sulfonic acid–based proton-exchange membranes

High Performance Cross-Linked Poly(2-acrylamido-2-methylpropanesulfonic acid)-Based Proton Exchange Membranes for Fuel Cells

Sulfonated Polyimide Membranes Constructed by Main‐Chain and Molecular‐Network Engineering Strategy for Direct Methanol Fuel Cell

Preparation and properties of epoxy-based cross-linked sulfonated poly(arylene ether ketone) proton exchange membrane for direct methanol fuel cell applications

Viscosity mechanism of perfluorosulfonic acid-based materials and their application in proton exchange membrane fuel cells

Sulfonated Poly(Fluorene Ether Ketone) (Spfek)/Alpha-Zirconium Phosphate (Zrp) Nanocomposite Membranes For Fuel Cell Applications

Sulfonated poly(fluorene ether ketone) (SPFEK)/α-zirconium phosphate (ZrP) nanocomposite membranes for fuel cell applications

Increases in the proton conductivity and selectivity of proton exchange membranes for direct methanol fuel cells by formation of nanocomposites having proton conducting channels

Quantitative analysis of proton exchange membrane prepared by radiation-induced grafting on ultra-thin FEP film

Design of a stable and methanol resistant membrane with cross-linked multilayered polyelectrolyte complexes for direct methanol fuel cells

Novel Proton Exchange Membrane with Long-Range Acid–Base-Pair Proton Transfer Pathways Based on Functionalized Polyethyleneimine