Abstract:As the core component of new energy vehicles, the safe operation of polymer electrolyte fuel cells has become more important with the rapid development of the new energy field. Since polymer electrolyte membrane (PEM) works at a hydrated environment, the mechanical properties of its hydrated state must remain stable. At present, studies have shown that the increase of water content will reduce the mechanical properties of materials, such as the decrease of Young's modulus, but the microscopic mechanism has not been elucidated. This presents a challenge to the work to develop novel PEMs. We tried to use the method of coarse-grained (CG) molecular dynamics (MD) simulation to study the microscopic mechanism of the mechanical properties of basic PEM Nafion membrane under different water content conditions. The purpose of this study is to seek to demonstrate the microscopic mechanism by which macroscopic mechanical properties are determined from the MD perspective, thereby providing general guidance for the future development of novel PEMs. More specifically, we tested the Nafion membrane (CG model with 4 beads on the main chain and 2 beads on the side chain) under tensile and compressive stress (strain 0-0.5) at different water contents (2-14). Quantified micro-parameters make it possible to establish macro-micro relationships. Considering that our chosen Nafion is the basic model, it may have good generality to other complex models. At the macroscopic level, our results show that increasing the water content reduces Young's modulus of the material. The decreasing rate of Young's modulus shows a slowing trend. This is in good agreement with previous research. At the microscopic level, our results show that the coordination number between any two types of atoms except water molecules within the same volume decreases with increasing water content, suggesting that the increase in water molecules forces other atoms to away from each other, thereby increasing the spacing between molecules. Therefore, the dominant force on this distance scale, that is, the electrostatic attraction between positive and negative ions is reduced. We have a reason to think that this is the main micromechanical factor to change macroscopic mechanical properties. In addition, the results of polymer chain entanglement parameters show that the degree of entanglement of polymer chains deepened with the increase of water content. The complex entangled structure will increase the difficulty of the polymer deformation. We believe that this is one of the micromechanical factors to decrease the Young's modulus. The study of these mechanisms may help in the development of new Nafion materials.

Viscosity mechanism of perfluorosulfonic acid-based materials and their application in proton exchange membrane fuel cells

A Kinetic Model for the Chemical Degradation of Perfluorinated Sulfonic Acid Ionomers: Weak End Groups Versus Side Chain Cleavage

Effects of Microstructure on the Retention of Proton Conductivity of Nafion/SiO2 Composite Membranes at Elevated Temperatures:An in Situ SAXS Study

Mechanical behavior of a hydrated perfluorosulfonic acid membrane at meso and nano scales

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

High-temperature low-humidity proton exchange membrane with "stream-reservoir" ionic channels for high-power-density fuel cells

Proton Transport, Electroosmotic Drag and Oxygen Permeation in Polytetrafluoroethylene Reinforced Ionomer Membranes and Their Effects on Fuel Cell Performance

Structural and transport properties of ultrathin perfluorosulfonic acid ionomer film in proton exchange membrane fuel cell catalyst layer: A review

Mechanistic investigation on the voltage collapse of polymer electrolyte membrane fuel cell under high-temperature and low-humidity conditions

Structural and Transport Properties of Hydrophilic and Hydrophobic Modified Ionomers in Proton Exchange Membrane Fuel Cells

Evaluating the Durability of Perfluorosulfonic Acid Membranes in Fuel Cells Using Combined Open-Circuit Voltage-Accelerated Stability Testing

High flexible ether-free semi-crystalline fuel cell membranes: Molecular-level design, assembly structure and properties

Durability and Performance Analysis of Polymer Electrolyte Membranes for Hydrogen Fuel Cells by a Coupled Chemo-mechanical Constitutive Model and Experimental Validation

Novel Proton Exchange Membrane with Long-Range Acid–Base-Pair Proton Transfer Pathways Based on Functionalized Polyethyleneimine

Optimizing the Molecular Weight of Poly(vinylidene Fluoride) for Competitive Perfluorosulfonic Acid Membranes

Study on Control of Polymeric Architecture of Sulfonated Hydrocarbon-Based Polymers for High-Performance Polymer Electrolyte Membranes in Fuel Cell Applications

Molecular Dynamics Study on the Microscopic Mechanism of Mechanical Properties of Nafion Membrane

Development of robust proton exchange membranes using sPVA-Silica composite with different crosslinkers and evaluation of their fuel cell performance

All-Perfluorosulfonated-Ionomer Composite Membranes Containing Blow-Spun Fibers: Effect of a Thin Fiber Framework on Proton Conductivity and Mechanical Properties

Composite proton exchange membrane featuring a three-layer structure: Enhanced thermal stability, proton conductivity, and fuel cell performance

Effect of temperature and external electric field on proton transport in ordered and amorphous proton exchange membranes: A molecular dynamics study