Abstract:The main subject of this work was the investigation of sintering behavior, microstructure, mechanical properties and biocompatibility of metal injection moulded (MIM) Ti-Nb alloys for biomedical applications. Commercially pure titanium (CP-Ti) samples were also fabricated by MIM as a reference. The sintering behavior of MIM Ti-Nb alloys was studied at first, in order to roughly determine the sintering parameters in the following investigations. Dilatometry was applied to investigate the linear shrinkage of MIM Ti-Nb samples from room temperature to 1500 °C at a heating rate of 3 °C/min under argon atmosphere. Various sintering parameters and Nb contents were used to investigate their influences on microstructure and mechanical properties of MIM Ti-Nb alloys by means of density measurements, optical microscopy (OM), X-ray diffraction (XRD), scanning electron microscopy (SEM) and mechanical testing. Transmission electron microscopy (TEM) and high energy X-ray diffraction (HEXRD) measurement were applied to investigate the nature and precipitation of the unexpected titanium carbide precipitates in MIM Ti-Nb alloys. Initial cell adhesion and cell proliferation assays of human umbilical cord perivascular cells (HUCPV) on MIM Ti-Nb alloys were performed for biocompatibility characterization. The results of this work show that MIM Ti-Nb and MIM CP-Ti samples have been successfully fabricated and the as-sintered samples show good shape retention without distortion compared to the green sample. The sintering process of MIM Ti-Nb alloys consists of three main steps – Ti-diffusion step, Ti-Nb-diffusion step and Matrix-diffusion step. With increasing sintering temperatures and time, MIM Ti-Nb alloys exhibit lower porosity and higher Young’s modulus. A higher Nb content in MIM Ti-Nb alloys leads to an increase of carbide area fraction and porosity. The three factors – Nb content, carbide area fraction and porosity – determine the mechanical properties of MIM Ti-Nb alloys. An increase of Nb content and amount of carbides as well as a lowered porosity lead to a higher tensile strength. A decrease of Young’s modulus can be expected with higher Nb content and porosity. A high amount of titanium carbides can result in very poor ductility, but annealing and quenching process can significantly improve the elongation by dissolving the carbides. MIM Ti-Nb alloys exhibit good biocompatibility, indicating their potential for implant applications.

Biopsy Applications of Ti50Ni41Cu9 Shape Memory Films for Wireless Capsule Endoscope

TiNi shape memory alloy coated with tungsten: a novel approach for biomedical applications

TEM study of the Ni-Ti shape memory micro-wire

Design and development of novel antibacterial Ti-Ni-Cu shape memory alloys for biomedical application

In Vitro Investigation of Nitiw Shape Memory Alloy As Potential Biomaterial with Enhanced Radiopacity

Studies and Applications of Niti Shape Memory Alloys in the Medical Field in China

Thin Film Shape Memory Microcage for Biological Applications

Surface modification of NiTi alloy with tantalum to improve its biocompatibility and radiopacity

Carbon-Based Nanostructured Coatings On Niti Shape Memory Alloy For Biomedical Applications

Fabrication of self-expandable NiTi thin film devices with micro-electrode array for bioelectric sensing, stimulation and ablation

Metallurgical Characterization of Controlled Memory Wire Nickel-Titanium Rotary Instruments

Optimization of Automated Crystal Orientation and Phase Mapping in TEM Applied to Ni-Ti All Round Shape Memory Alloy

Tailorable Copper-Bearing Titanium Alloys with Remarkable Strength and Ductility Fabricated by Spark Plasma Sintering for Biomedical Applications

The Microstructure of Ti-Ni-Cu Shape Memory Thin Films: a Review

Comparative In Vitro Study of Ti-12V-9Sn Shape Memory Alloy with C.P. Ti and Ti-12V Alloy for Potential Biomedical Application

Plasma Surface Modification of Nickel Titanium Shape Memory Alloys

Metal Injection Moulding of Titanium-Niobium Alloys for Biomedical Applications

Microstructure and Mechanical Behavior of Metal Injection Molded Ti–Nb Binary Alloys As Biomedical Material

Design of micro biopsy device for wireless autonomous endoscope

Corrosion resistance and cytocompatibility of Ti–19Zr–11Nb–4Ta shape memory alloy for biomedical applications