Abstract:Ti-Ni alloy is the most attractive material in the medical field for orthopedic implants like total hip replacement due to its special properties. The purpose of this study was to examine the impact of grinding/milling times on the characteristics of the nanostructured Ti 50 -Ni 50 alloys produced via the mechanical alloying process (MA), utilizing a planetary high-energy ball mill at different grinding times (2, 6, 12, and 18 h). The grinding time causes grain refinement and a decrease in the porosity of materials, which allows for the improvement of a material's mechanical properties and wears resistance. The structural, physical and tribological behavior of Ti 50 -Ni 50 alloy was characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), nanoindentation test, and ball-on-disk tribometer operated under varying applied loads of 2, 10, and 20 N. The findings demonstrated that the crystallite size was reduced and the microstrain increased reaching values of 29 nm, and 0.99%, respectively, at higher grinding times. The percentage of porosity in the Ti 50 -Ni 50 alloy was 11%, while the density attained was 89% after 18 h of grinding. Moreover, as the grinding duration increased up to 18 h, the hardness increased (341 HV) owing to the refinement of the grains. It was also noted that the Ti 50 -Ni 50 alloy that was milled at 2 h exhibited the lowest elastic modulus (89 GPa). In addition, it was found that wear rates and the coefficient of friction were decreased reaching the values of 29.67 μm 3 /N.μm, and 0.31, respectively, for the samples milled at 18 h and examined under 2 N. Enhanced structural and mechanical qualities are responsible for this improvement in tribological properties. These properties make Ti 50 -Ni 50 alloys clinically relevant for human biomedical implantation.

Wear Characterization of Biomedical Porous Alloy (Ni50–xTi50Cux) at Elevated Temperature

Wear Behavior of Ti-xNb Biomedical Alloys by Ball Cratering

Corrosion and wear behavior of Ti-5Cu-xNb biomedical alloy in simulated body fluid for dental implant applications

Investigation of sliding wear, electrochemical corrosion, and biocompatibility of Ti-Nb alloys for biomedical applications

Wear characteristics of Ti–Nb–Ta–Zr and Ti–6Al–4V alloys for biomedical applications

Effect of milling time on structural, mechanical and tribological behavior of a newly developed Ti-Ni alloy for biomedical applications

Antibacterial activity, corrosion resistance and wear behavior of spark plasma sintered Ta-5Cu alloy for biomedical applications

A Comparative Study on Corrosion and Wear Performances of Ti–Nb–(Cu, Co) Biomedical Shape Memory Alloys

Wear Mechanism and Tribological Characteristics of Porous NiTi Shape Memory Alloy for Bone Scaffold

Nickel Release Behavior, Cytocompatibility, and Superelasticity of Oxidized Porous Single-Phase NiTi.

Design and development of novel antibacterial Ti-Ni-Cu shape memory alloys for biomedical application

Microstructure, Mechanical Properties and Dry Wear Resistance of Β-Type Ti–15Mo–xNb Alloys for Biomedical Applications

Studies of high temperature sliding wear of medium carbon Nickel-Chromium based alloy steel

MORPHOLOGY OF WEAR DEBRIS DURING DRY SLIDING OF Ti6Al4V/TiC COMPOSITE AT ELEVATED TEMPERATURES IN VACUUM CONDITIONS

Performance Assessment of Ni-Coated Titanium Alloys Under Wet Conditions

Wear and Frictional Behavior of Copper Modified Ti-6Al-4V Alloy

Wear performance of Ti-6Al-4 V titanium alloy through nano-doped lubricants

High temperature tribological behavior of atmospheric plasma-sprayed CoCrFeNiW0.3 + 5 at% C high-entropy alloy coating

The Dry Sliding Wear Properties of Nano-Sized TiCp/Al-Cu Composites at Elevated Temperatures

Wear Properties of Porous NiTi Orthopedic Shape Memory Alloy

Assessing Microstructural, Biomechanical, and Biocompatible Properties of TiNb Alloys for Potential Use as Load-Bearing Implants