Abstract:The purpose of the investigations was to study systematically the effects of different tempering temperatures on the microstructure, hardness and wear resistance of low‐silicon hypereutectic high‐chromium cast iron. It is expected to provide theoretical support for the development of tempering processes for this material. High‐chromium cast iron is a good wear‐resistant material. Its heat treatment regime has an important influence on the evolution of its microstructure and properties. This study investigates the microstructural attributes and properties of Fe–4.0 C–35.0Cr–0.5Si (wt.%) low‐silicon hypereutectic high‐chromium cast iron subsequent to quenching at 1050 °C, followed by tempering at diverse temperatures. The microstructure was examined using optical microscopy, scanning electron microscopy, and X‐ray diffractometry across varied tempering conditions. Furthermore, microhardness and wear resistance were conducted via a microhardness tester and a wear testing machine. The results show that the quenching heat treatment promotes the transformation of the matrix from austenite to martensite, while also promoting the precipitation of secondary carbides of M23C6‐type. The subsequent tempering heat treatment engenders transformations involving retained austenite to martensite, amplifies the precipitation and enlargement of secondary carbides, and induces martensite decomposition. As the tempering temperature increases, primary and eutectic carbides exhibit minimal changes, while the secondary carbide morphology evolves from granular to reticular. The matrix composition predominantly comprises martensite, interspersed with a minor fraction of austenite. It is worth noting that the alloy has the highest hardness and wear resistance after quenching at 1050 °C and then tempering at 400 °C.

Effect of partial remelting time on the initial carbide in semisolid structure of hypereutectic hih Cr cast iron

Microscopic Study of Carbide Precipitation during Heat Treatment of 35Cr–4C High Chromium Cast Iron

Effect of quenching temperature on microstructure and properties of low silicon hypereutectic high chromium cast iron

Effect of quenching temperature on microstructure and properties of multivariate high chromium cast iron

Effect of aluminum on the primary carbides of a hypereutectic high chromium cast iron

Effect of heating temperature and holding time on carbide of GCr15SiMn bearing steel

Effect of Carbon and Cooling Rate on the Structure of Hypereutectic High Chromium Cast Iron in the Cast State and after Heat Treatment

Effect of solutes on the formation of primary carbides during solidification of hypereutectic high chromium cast irons through thermodynamic modeling

Influence of Tungsten on Microstructure and Properties of As-Cast Hi-Cr Cast Iron

Effect of Recrystallization and Partial Remelting on Al15Mg45Li39Ca0.5Si0.5 Lightweight High-Entropy Alloy

Effect of tempering temperature on microstructure and properties of low silicon hypereutectic high chromium cast ironAuswirkung der Anlasstemperatur auf das Gefüge und die Eigenschaften von übereutektischem Gusseisen mit niedrigem Siliziumgehalt und hohem Chromgehalt

Dissolution of Large‐Sized Primary Carbides in 6Cr13 Continuous Casting Slabs during High‐Temperature Homogenization

Effect of Si on Microstructure and Wear Resistance of Hypereutectic High-Chromium Cast Iron

Experimental Study and Computer Simulation on Multicomponent Diffusion in Multiphase Dispersions During Solid Carburizing of HP40Nb and KHR45A Alloys

Simulation of the Kinetics of Microstructure Evolution during Destabilization and Tempering of a High-Chromium White Cast Iron

Microstructure of a novel Ni-Cr-W-Mo-V containing ductile iron and decomposition behavior of its eutectic carbides at elevated temperature

Microstructure Evolution and Properties of Nitrogen-Bearing Hypereutectic High Chromium Cast Iron after Quenching

Distribution Characteristics and Thermal Stability of Primary Carbide in Cast Ce-H13 Steel

Characterization of Microstructure and Mechanical Properties of High Chromium Cast Irons Using Sem and Nanoindentation

Carbides Dissolution in 5Cr15MoV Martensitic Stainless Steel and New Insights into Its Effect on Microstructure and Hardness

Morphology Refinement of Eutectic Carbides Assisted by Static Magnetic Field during Laboratory Electroslag Remelting Process