Abstract:In order to solve the problems of high gas consumption and low battery power in hybrid electric buses, the logic threshold control strategy is optimized by the key technology research of driving conditions, control strategy, and so on. First, driving condition data of hybrid electric buses are collected and analyzed, and three typical working conditions are selected. Second, the torque distribution control strategy is investigated based on the instantaneous optimization algorithm. The objective function of the instantaneous equivalent fuel consumption is derived. The process of solving the objective function is attributed to linear programming problem of the nonlinear objective function. The SIMULINK model of instantaneous torque distribution strategy is established based on equivalent fuel consumption. On this basis, the SIMULINK model of the function which can be integrated into the vehicle control model is established. Then, considering the actual driving conditions of the bus, the vehicle control strategy model is established in the MATLAB/SIMULINK environment, and the vehicle model established by the cruise software. Finally, the vehicle model is simulated under three representative working conditions. The main contribution of this paper is the optimized torque distribution control strategy to control hybrid electric bus's energy distribution and reduce emissions. The strategy can be obtained by combining the logic threshold torque distribution control strategy, along with the optimal engine torque and motor torque, which can be obtained by solving the objective function of instantaneous equivalent fuel consumption. Results show that compared with the logic threshold value torque distribution control strategy, the energy control strategy of the instantaneous optimization algorithm can further reduce gas consumption and maintain the state of charge value balance of the power battery.

High-Efficiency Control Strategy Of Aeronautical Fuel Pump Motor

Dual Closed-Loop Control Strategy on Harmonic Plane for Multiphase Induction Motor with Harmonic Injection Based on Air-Gap Flux Orientation Control

Development of an Intelligent Electric Motor-Driven Pump with High Energy Efficiency

Rotor field oriented control strategy of multiphase induction motor

Compound Current Control for Aerospace Fuel Pump Motor

Phase Current Distortion Correction Control for Aerospace Fuel Pump Motor

High-Power-Factor Control Of Ipmsm Drive System With Small Dc-Link Capacitor

A 5-Phase Fault-Tolerant Brushless Permanent Magnet Motor Drive for an Aircraft Thin Wing Surface Actuator

Direct Torque Control for Brushless DC Motors in Aerospace Applications with Single Sided Matrix Converters with Reduced Torque Ripple

A Control Scheme for a High Speed Railway Traction System Based on High Power PMSM

Control Strategy of High Performance IPMSM Drive in Wide Speed Range

Development of Parallel-Connected Pump–valve-Coordinated Control Unit with Improved Performance and Efficiency

Air-gap and Yoke Flux Density Optimization for Multiphase Induction Motor Based on Novel Harmonic Current Injection Method

A Control Strategy for the Optimal Efficiency of Induction Motor Based on Loss Model and Fuzzy Search

An Improved Model Predictive Direct Torque Control Strategy for Reducing Harmonic Currents and Torque Ripples of Five-Phase Permanent Magnet Synchronous Motors.

Energy Control Strategy of HEB Based on the Instantaneous Optimization Algorithm.

Maximum Torque Per Ampere Control of IPMSM Based on Online Parameter Identification Considering Cross-coupling and Saturation Effects

Control of Interior Permanent Magnet Synchronous Motor Drives over a Wide Speed Range

Research on Efficiency Optimization Control Strategy of Axial Field Flux-Switching Permanent Magnet Motor

Induction Motor Energy Optimization Control Strategy Based on Variable-Structure Control

A position-free control strategy in the full speed domain based on an electro-hydraulic pump