Abstract:Silver nanoparticles were synthesized with a chemical reduction method in the presence of polyvinylpyrrolidone as stabilizing agent. The thermal stability behavior of the silver nanoparticles was studied in the temperature range from 25 to 700°C. Thermal gravimetric analysis was used to measure the weight loss of the silver nanoparticles. Scanning electron microscopy and high-resolution transmission electron microscopy were used to observe the morphology and the change in shape of the silver nanoparticles. In situ temperature-dependent small-angle X-ray scattering was used to detect the increase in particle size with temperature. In situ temperature-dependent X-ray diffraction was used to characterize the increase in nanocrystal size and the thermal expansion coefficient. The results demonstrate that sequential slow and fast Ostward ripening are the main methods of nanoparticle growth at lower temperatures (<500°C), whereas successive random and directional coalescences are the main methods of nanoparticle growth at higher temperatures (>500°C). A four-stage model can be used to describe the whole sintering process. The thermal expansion coefficient (2.8 × 10(-5) K(-1)) of silver nanoparticles is about 30% larger than that of bulk silver. To our knowledge, the temperature-driven directional coalescence of silver nanocrystals is reported for the first time. Two possible mechanisms of directional coalescence have been proposed. This study is of importance not only in terms of its fundamental academic interest but also in terms of the thermal stability of silver nanoparticles.

Formation of Silver Nano Particles in Percolative Ag‐PbTiO 3 Composite Dielectric Thin Film

Two Stage Formation of Silver Nanoparticles in PZT Thin Films Controlled by Re-Nucleation Through Transition Phase of Ag-Pb Alloy

Formation of Ag Nanoparticles in Percolative Ag–PbTiO3 Composite Thin Films Through Lead-Rich Ag–Pb Alloy Particles Formed As Transitional Phase

Effect of Heat Treatment Temperature on the Formation of Ag Nanoparticles in Ag-Pbtio3 Composite Thin Films

Effect of dispersed Ag on the dielectric properties of sol–gel derived PbTiO3 thin films on ITO/glass substrate

Preparation of Silver Dispersed Pbtio3 Film by Sol-Gel Method

Preparation and characterization of heat-assisted PbS/TiO 2 thin films

Percolative Nanoparticle-Ag/pbzr0.52ti0.48o3 Composite Thin Film with High Dielectric and Ferroelectric Properties

The Effect of Dual Complexing Agents of Lactic and Citric Acids on the Formation of Sol-Gel Derived Ag–PbTiO3 Percolative Thin Film

Effects of Heat-Treatment Temperature on Preparation of the Sol-Gel-Derived Ag/TiO2 Films

Formation of Pb0.6sr0.4(Ti0.97mg0.03)O-2.97 Thin Films on Assembled Bottom Electrodes with Titanium Silicide Nanowires

Ag Nanoparticle Dispersed Pbtio3 Percolative Composite Thin Film with High Permittivity

Sol-Gel Preparation and Optical Properties of Ag Nanoparticle/TiO2 Composite Films

SOL-GEL DERIVED BaTiO3 THIN FILMS WITH EMBEDDED SILVER NANOPARTICLES: PREPARATION AND DIELECTRIC PROPERTIES

Effect of Incorporation of Silver on the Electrical Properties of Sol-Gel-Derived Titania Film

Tailoring the Light Absorption of Ag-PZT Thin Films by Controlling the Growth of Hexagonal- and Cubic-Phase Ag Nanoparticles

Physical Characteristics of Heat-Treated Nano-Silvers Dispersed in Sol–gel Silica Matrix

Nano Conductive Particle Dispersed Percolative Thin Film Ceramics with High Permittivity and High Tunability

Temperature-driven Directional Coalescence of Silver Nanoparticles

Preparation of PbTiO3 thin films by a modified Sol-Gel processing

Synthesisof silver nanowires by polyol process and the application in transparent & conductive films