Abstract:The frictional heat transfer regularity in the mechanical seal system consisting of the rotating ring, the stationary ring, the fluid film in the end faces and the sealed medium was investigated. The primary factors affecting the frictional heat transfer regularity, such as the heat transfer coefficients from the rings to the sealed medium, the frictional heat flux, the frictional heat distribution ratio and so on, were discussed. The equations for calculating the temperature field both in the sealing members and in the fluid film were derived. The coupling analysis of the frictional heat of the fluid film and the thermal deformation of the two end faces of the rings was carried out to obtain the separation angle of the two deformed end faces in consideration of the viscosity change of the fluid film. The results indicate that the frictional heat of the fluid film heavily affects its characteristic and the sealing performance of mechanical seals. The frictional heat changes not only the shape of the gap between the end faces but also the viscosity of the fluid film, and thereupon leads to the increase of the leakage rate. The maximum temperature of the system is at the inner radius of the fluid film, and most of the frictional heat is conducted by the rotating ring. Based on the heat transfer analysis method put forward in this paper, the parameterized design of mechanical seals can be realized to determine the best geometrical parameters and to select the appropriate material of the sealing members.

Optimum Design of Spiral Grooved Mechanical Seal Based on Thermo-Hydrodynamics

An Improved Design of Spiral Groove Mechanical Seal

Effect of T-groove Parameters on Steady-State Characteristics of Cylindrical Gas Seal

Coupling Analysis of Fluid Film and Thermal Deformation of Sealing Members in Spiral Groove Mechanical Seal

Control of Leakage Rate in Spiral Groove Mechanical Seal

Optimum Design of Flat End Face Mechanical Seal Based on Coupling Analysis

Investigation Into The Performance Of The Vl Seal Based On The 3d Model

Optimization Design of Main Parameters for Double Spiral Grooves Face Seal

Coupled Heat Transfer Characteristics in a Spiral Groove Mechanical Seal Lubricated by Magnetic Fluid

Theoretical Analyses and Design Guidelines of Oil-Film-Lubricated Mechanical Face Seals with Spiral Grooves

Effects of main structural parameters on seal performance of a new double spiral groove face seal

Design and Experimental Study on the Controllable High-Speed Spiral Groove Face Seals

Effect of Low Temperature Fluid Viscosity on Geometry Optimization of Double Spiral Groove Mechanical Seals

Thermal Cavitation Effect on the Hydrodynamic Performance of Spiral Groove Liquid Face Seals

Structural parameter optimization of spiral groove dry gas seal under low or medium pressure

Thermoelastohydrodynamic Behavior of Gas Spiral Groove Face Seals Operating at High Pressure and Speed

Optimization Design Of The Inner Radius Of The Sealing Surface Of Slipper

Thermo-hydrodynamic analysis of spiral groove dry gas seals

Frictional Heat Transfer Regularity of the Fluid Film in Mechanical Seals

Study on working mechanism and performance of deep groove seal at high temperature and high speed in mixed lubrication

Optimization design for mechanical seals in reactor coolant pumps based on a fluid-solid strong-interaction model