Abstract:Carbon-fiber reinforced polymer (CFRP) composites possess high specific stiffness and strength and have been widely used as structural materials in aerospace and aircraft engineering. In many practical applications, such as wing skin, loading condition is a complexity of tension, bending, and torsion. Therefore, fabricating CFRP composite laminates of multiple-angled plies is necessary to achieve balanced mechanical properties and meet the loading requirements under different working conditions. However, considering the size and weight limitations, designing a quasi-isotropic laminate with standard ply thickness (0.125 mm) is difficult. The recently developed spread-tow technique has provided a promising strategy to fabricate composite laminates of thin and light plies for the production of thinner and lighter laminates and structures and improvement of mechanical performance. Laminates fabricated using thin plies exhibit much higher strength in tension, compression, and impact as compared with standard-ply laminates because of the associated positive size effects. In the thin-walled structure, buckling stability is the primary factor determining the mechanical performance. In this study, composite cylindrical shells with different ply thickness (0.125, 0.055, and 0.020 mm) were fabricated via cross-ply and balanced stacking using the spread-tow technique, and their buckling behaviors under axial compression were studied. The experimental results show that with decreasing ply thickness, the critical buckling loads of composite cylindrical shells with cross-ply and balanced stacking under axial compression increase, whereas the buckling mode of composite cylindrical shells remains constant. Mechanical analysis indicates that the bending stiffness variation and interlaminar shear stress distribution play a key role in increasing the critical buckling load of the composite cylindrical shells, and the application of thin plies effectively improves the local buckling performance of the thin-walled composite structures.

Buckling Behaviors And Interfacial Toughness Of A Micron-Scale Composite Structure With A Metal Wire On A Flexible Substrate

Dynamic Behaviors of Controllably Buckled Thin Films

Buckling behavior of micro metal wire on polymer membrane under combined effect of electrical loading and mechanical loading

Measurement of Interfacial Toughness of Metal Film Wire and Polymer Membrane Through Electricity Induced Buckling Method

Finite Deformation Mechanics In Buckled Thin Films On Compliant Supports

Postbuckling Analysis and Its Application to Stretchable Electronics

Buckling Behavior Of Metal Film/Substrate Structure Under Pure Bending

A Simply Analytic Study of Buckled Thin Films on Compliant Substrates

Interfacial Thermal Conductance of Buckling Carbon Nanotubes

Surface Effects on In-Plane Buckling of Nanowires on Elastomeric Substrates

Competing Buckling of Micro/nanowires on Compliant Substrates

Buckling Modes of Polymer Membranes Restricted by Metal Wires

Dynamic Buckling Behavior of Thin Metal Film Lines from Substrate

Experimental Study of Nano-Film Buckling Mode

Modeling the Compressive Buckling Strain As a Function of the Nanocomposite Interphase Thickness in a Carbon Nanotube Sheet Wrapped Carbon Fiber Composite

Mechanism of the Transition From In-Plane Buckling to Helical Buckling for a Stiff Nanowire on an Elastomeric Substrate

Research on Lateral Buckling Mechanism of Tensile Armor Wires in Unbonded Flexible Pipe

Buckling of Interfacial Layers in Periodic Cellular Composite Structures

On the Buckling Behavior of Micromachined Beams

Buckling of Composite Cylindrical Shells Fabricated Using Thin-Ply under Axial Compres-Sion

Buckling Analysis Of Stiff Thin Films Suspended On A Substrate With Tripod Surface Relief Structure