Abstract:Using light to dynamically and stably redirect the flow of another beam of light is a long-term goal for photonic-integrated circuits. However, it is challenging to realize a practically all-optical switching device in silicon owing to its weak optical nonlinearity. Major published work on all-optical switches were using single-photon absorption and two-photon absorption, which requires ultrahigh switching energy. This paper presents a nano-silicon-photonic all-optical switch driven by an optical gradient force, in which a fast switching speed with low power consumption is obtained. Each switching element is composed of a waveguide crossing connection and a micro-ring resonator. The ring resonator is side-coupled to a double-etched waveguide crossing, while the micro-ring resonator is partially released from the substrate and becomes free-standing. When the “drop” port is in “OFF” state, the wavelength of the signal light from the “input” port does not satisfy the resonant condition in the micro-ring. Therefore, light is mainly transmitted to the "thru" port without control light. When a control light is loaded to the “add” port, of which the wavelength satisfies the resonance condition in the micro-ring, a strong optical gradient force is generated by the induced evanescent optical field. The freestanding arc of the ring is then bent down to the substrate, leading to a cavity resonance wavelength shift. As a result, the signal light is diverted to the “drop” port and the corresponding transmission state is switched to the “ON” state. The optical switch is fabricated by nano-photonic fabrication processes using standard silicon-on-insulator (SOI) wafer. The waveguide structures have a width of 450 nm and a height of 220 nm for a single mode transmission; the outer radius of the ring in the switching element is 15 μm; the coupling gap between the ring and the nano-waveguide is 200 nm; the system is fabricated through two-step lithography and plasma dry etching processes while the free-standing arc is released by undercutting the buried oxide layer. #br#A switching time of 180 ns(rise) and 170 ns (fall) is experimentally demonstrated, which is much faster than that of conventional optical switches. The present optical switch can reach a high extinction ratio (10.67 dB) and a low crosstalk (-11.01 dB). In addition, the proposed switch has the advantages of compact size and low power consumption. Potential applications of this optical switch include photonic integrated circuits, signal processing, and high speed optical communication networks.

Design and experiments of a Nano-opto-mechanical switch using EIT-like effects of coupled-ring resonator

Hitless Wavelength-Selective Switch Using a Single Microring Resonator Assisted With a Symmetric MZI

Fano-resonance-based Mach-Zehnder Optical Switch Employing Dual-Bus Coupled Ring Resonator As Two-Beam Interferometer.

Hitless Wavelength-Selective Switch Based on Single Microring Resonator Embedded with an Equal Armed MZI

Experimental Demonstration of an Optical Feynman Gate Using Cascaded Silicon Microring Resonator

Electro-Optic Polymer Assisted Optical Switch Based on Silicon Slot Structure

Experimental Demonstration of Thermally Tunable Fano and EIT Resonances in Coupled Resonant System on SOI Platform

Ring-resonator-assisted Optical Switch with High Extinction Ratio

Realizing the electromagnetically induced transparency (EIT)-like transmission with a single hole-ring resonator

A Nano-Silicon-photonic Switch Driven by an Optical Gradient Force

Low-power 2×2 Silicon Electro-Optic Switches Based on Double-Ring Assisted Mach-Zehnder Interferometers.

Simulation and Optimization of Polymer Electro-Optic Microring Resonator Switches

Controllable All-Optical Switch Using an EDF-Ring Coupled M-Z Interferometer

A high-performance multi-wavelength optical switch based on multiple Fano resonances in an all-dielectric metastructure

Simulation and Optimization of Polymer Electro-Optic Double Series-Coupled Microrings Resonator Switches

Design and Fabrication of a F-P Optical Switch Based on MOEMS Technology

Optimum Design of a Polymer Electro-Optic Microring Resonator Switch

Analysis of Electro-Optic Switches with Series-Coupled Multiple Microring Resonators

Hybrid Si3N4/electro-optic Polymer Waveguide Mach-Zehnder Interferometer for High-Speed Electro-Optic Switching

A tunable optical Kerr switch based on a nanomechanical resonator coupled to a quantum dot.

LNOI photonic wire switch based on phase transition material