Abstract:Steel-basalt hybrid fibers reinforced cementitious composite (SBFRCC) is a potential reinforce-ment and repair material for engineering structures with fire risk due to its excellent mechanical properties exposed to ambient and high temperatures. However, the bonding properties between SBFRCC and existing concrete are still unclear, especially at high temperatures. To fill this gap, the bonding properties between SBFRCC and existing concrete at high temperatures were investigated based on two situations by using the slant shear and splitting tensile tests. First, the existing concrete was heated at high temperatures and then bonded with SBFRCC and strengthening concrete to form combined systems, respectively. The effects of the interface roughness, high temperature duration, and post-fire-curing on their bonding properties were investigated. Second, the existing concrete was bonded with SBFRCC and then heated at high temperatures, and the effects of fly ash substation rates on the bonding properties were studied. Besides, the backscattered-electron (BSE) was used to observe the interface between the exiting concrete and SBFRCC exposed to various temperatures. Results show that the first bonded and then heated specimens are slide-failed and separated at the bonding interface from room tem-perature to 600 degrees C, while the damage is generated within the existing concrete at 800 degrees C. SBFRCC has better high temperature resistance than the existing concrete. The slant shear and splitting tensile strengths between PC-A and SBFRCC are 9%-33.3% higher than that of PC-A and strengthening concrete at all temperatures. The appropriate roughness at the interface by pol-ishing can significantly improve the bonding properties between the existing concrete and SBFRCC. The bonding strength is recovered by more than 18.2% and 29.8% after the post-fire curing of 28 and 90 d, respectively. The increase of fly ash substitution rates has a certain contribution to the bonding properties above 600 degrees C.

Mechanical Properties of SFHPC after Exposure to High Temperatures

Mechanical Properties and Microstructures of Steel-basalt Hybrid Fibers Reinforced Cement-based Composites Exposed to High Temperatures

Comparative analysis of dynamic mechanical properties of steel fiber reinforced concrete under ambient temperature and after exposure to high temperatures

Flexural Behavior of Ultra-High-Performance Fiber-Reinforced Concrete Beams after Exposure to High Temperatures

Mechanical Properties of HPC Incorporating Fly Ash and Ground Granulated Blast Furnace Slag After Exposure to High Temperatures

Bonding Properties Between Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites and Existing Concrete at High Temperatures

Effects of High Temperature and Substitution Rates of Fly Ash on the Mechanical Properties and Microstructures of Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites

Experimental Study on the Effect of Polypropylene Fiber on Compressive Strength and Fracture Properties of High-Strength Concrete after Elevated Temperatures

Microstructure and Mechanical Properties of High-Toughness Fiber-Reinforced Cementitious Composites after Exposure to Elevated Temperatures

Pull-out behaviour of steel fibres embedded in ultra-high-performance concrete after exposure to high temperatures

Dynamic Behavior for Steel-Fiber Reinforced Reactive Powder Concrete after Exposure in High Temperature

Effect of Fibers on High-Temperature Mechanical Behavior and Microstructure of Reactive Powder Concrete

The Effects of High Temperature on Flexural Strengths of High Performance Nano-Modified Cementitious Composites

Residual Strength of Hybrid-Fiber-Reinforced High-Strength Concrete after Exposure to High Temperatures

Study on the Fracture Mechanical Properties of High Performance Concrete (HPC) with Rapid Cooling after High Temperature

Mechanical Properties of Hybrid Fibers and Nano Silica Reinforced Concrete During Exposure to Elevated Temperatures

Mechanical Responses of Steel Fiber–Reinforced Concrete after Exposure to High Temperature: Experiments and Mesoscale Discrete Modeling

Research on mechanical properties of ultra-high performance fiber reinforced cement-based composite after elevated temperature

Thermal and Mechanical Properties of Ultrahigh Toughness Cementitious Composite with Hybrid PVA and Steel Fibers at Elevated Temperatures

Flexural Behavior of Ultra-High Performance Hybrid Fiber Reinforced Concrete at the Ambient and Elevated Temperature

Impact Mechanical Properties of Reactive Powder Concrete after Exposure in High Temperature