Abstract:Solar energy conversion is one of the most important issues for creating and maintaining a future sustainable society. In this regard, photovoltaic technologies have attracted much attention because of their potential to solve energy and environmental issues. In particular, thin-film solar cells, such as organic photovoltaics (OPVs) and perovskite solar cells (PSCs), are highly promising owing to their flexibility, light weight, and low-cost production. One of the most important factors used to evaluate solar-cell performance is the power conversion efficiency (PCE), which is the ratio of the output electric power divided by the input light power. The PCEs of PSCs have become comparable to those of multicrystalline silicon solar cells in a laboratory level, but the PCEs of OPVs have yet to catch up with them and still need to be improved. The insufficient durability of PSCs and OPVs is also a challenge that needs to be addressed. Fullerene derivatives have been utilized as electron acceptors and electron-transport materials in OPVs and PSCs. However, the use of fullerene derivatives requires attention to their isomers if they are multiadducts or even monoadducts produced from fullerenes with low symmetry. Their nonuniform structures and electronic properties may exert a negative effect on photovoltaic properties. However, most researchers in the field of OPVs and PSCs have been unaware of the importance of the isomerism. Even the most prevalent, high-performance fullerene acceptor, [6,6]-phenyl-C71-butyric acid methyl ester ([70]PCBM), has been used as an isomer mixture. In this Account, we summarize recent studies on the effects of isomer separation of fullerene derivatives on the device performances of OPVs and PSCs. Largely, fullerene derivatives containing various isomers are categorized into [60]fullerene bisadducts, [70]fullerene bisadducts, and [70]fullerene monoadducts. In all cases, the difference in isomerism was found to have a large impact on PCEs. The miscibility with polymer donors and film-forming property of fullerene derivatives were affected by the isomer separations, which exert the most potent influence on device performances. Although the disorders in energy levels among isomers are not definitely influencing on photovoltaic properties of isomer mixtures, the molecular packing structures of fullerene derivatives make a significant effect on their photovoltaic properties. Notably, isomerically pure fullerene derivatives often-but not always-exhibit higher PCEs than the isomer mixture. The search for the best isomers of fullerene derivatives and their optimal compositional ratios, which extensively depend on their roles and the combined materials, will be an indispensable step to achieving consistently higher device performances for OPVs and PSCs.

Stereomeric Effects of Bispc 71 BM on Polymer Solar Cell Performance

Isomer‐Dependent Photovoltaic Properties of the [6,6]‐Phenyl‐C 61 (or C 71 )‐Butyric Acid Methyl Esters

[6,6]-Phenyl-c61-butyric Acid 2-((2-(dimethylamino)ethyl)(methyl)amino)-ethyl Ester As an Acceptor and Cathode Interfacial Material in Polymer Solar Cells

Bulk heterojunction solar cells based on two kinds of organic polymers and fullerene derivative

[6,6]-Phenyl-C61-butyric acid dimethylamino ester as a cathode buffer layer for high-performance polymer solar cells

Improving Charge Transport and Suppressing Charge Recombination in Small Molecule Ternary Solar Cells Via Incorporating Bis-PC71BM As a Cascade Material

Influence of Molecular Geometry of Perylene Diimide Dimers and Polymers on Bulk Heterojunction Morphology Toward High‐Performance Nonfullerene Polymer Solar Cells

Asymmetric Isomer Effects in Benzo[ c ][1,2,5]thiadiazole‐Fused Nonacyclic Acceptors: Dielectric Constant and Molecular Crystallinity Control for Significant Photovoltaic Performance Enhancement

High-Yield Synthesis And Electrochemical And Photovoltaic Properties Of Indene-C-70 Bisadduct

Isomer‐Pure Bis‐PCBM‐Assisted Crystal Engineering of Perovskite Solar Cells Showing Excellent Efficiency and Stability

Optoelectronic properties and aggregation effects on the performance of planar <i>versus</i> contorted pyrene-cored perylenediimide dimers for organic solar cells

Effect of alkylthiolated hetero-aromatic rings on the photovoltaic performance of benzodithiophene-based polymer/fullerene solar cells

PC71BM as Morphology Regulator for Highly Efficient Ternary Organic Solar Cells with Bulk Heterojunction or Layer‐by‐Layer Configuration

Isomer Effects of Fullerene Derivatives on Organic Photovoltaics and Perovskite Solar Cells

Side Chain Engineering of Copolymers Based on Bithiazole and Benzodithiophene for Enhanced Photovoltaic Performance

Polymer Solar Cells with an Inverted Device Configuration Using Polyhedral Oligomeric Silsesquioxane-[60]Fullerene Dyad As a Novel Electron Acceptor

Spirobifluorene-based Acceptors for Polymer Solar Cells: Effect of Isomers

Isomerism Strategy to Optimize Aggregation and Morphology for Superior Polymer Solar Cells

Backbone regulation of a bithiazole-based wide bandgap polymer donor by introducing thiophene bridges towards efficient polymer solar cells

Modulation of Morphological, Mechanical, and Photovoltaic Properties of Ternary Organic Photovoltaic Blends for Optimum Operation

Chlorinated polymer solar cells simultaneously enhanced by fullerene and non-fullerene ternary strategies