Abstract:Friction and wear between sliding surfaces can lead to various issues in industrial applications, such as increased costs, reduced machine lifespan, loss of functionality, energy loss, and decreased system efficiency. To mitigate these problems, lubricants and coatings are commonly employed. This study aims to investigate the impact of coatings and lubrication on friction coefficient, wear volume loss, and lubricant temperature using the block-on-ring wear test. The effectiveness of different coatings (uncoated, DLC, CrN, and TiALN) and lubricants (anti-friction graphene oxide additive oil and strong nano engine oil additive) in reducing friction and wear is evaluated. The block-on-ring tests are conducted under varying loads (6-60 N), speeds (1450 rpm), lubricant volumes (40 ml), and durations (2-20 min). The coefficient of friction is measured using an inline load cell, wear volume loss is determined by weighing the blocks before and after the experiment, and lubricant temperature is monitored using thermocouples. The results indicate that the coefficient of friction decreases with increasing load, while the lubricant temperature rises. Coated blocks exhibit lower wear volume loss compared to uncoated blocks. Overall, the combination of CrN-coated blocks and anti-friction graphene oxide additive oil demonstrates the best tribological performance.

Friction Behaviors of Bushing in Rolling Contact with Shaft and Electroless Ni-PTFE-P or Ni-Al2O3-P Coating

Antifriction and Wear Characteristics of Electrolessly-Deposited Ni–P with PTFE Composites

Friction and Wear Performances of Materials for Wind Turbine Sliding Bearing Bushes

Tribological Behavior and Surface Analysis of Ni–P/BP Coatings

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

The Preparation and Frictional Performance of Electroless Ni-P-PTFE Composite Coatings on Mechanical Seals

Preparation of the electroless Ni–P and Ni–Cu–P coatings on engine cylinder and their tribological behaviors under bio-oil lubricated conditions

Effects of PVD CrAlN/(CrAlB)N/CrAlN Coating on Pin–Disc Friction Properties of Ti2AlNb Alloys Compared to WC/Co Carbide at Evaluated Temperatures

The Effects of Surface Roughness on the Durability of Polydopamine/PTFE Solid Lubricant Coatings on NiTiNOL 60

The friction and wear of electroless Ni–P matrix with PTFE and/or SiC particles composite

A Research on the Friction and Wear Properties of Electroless Ni-P Composite Coating

Tribological Dependence of the High-Performance Ferrous-Based Coating on Different Coating Counterparts in Engine Oil

Preparation and properties of Ni-P/Bi self-lubricating composite coating on copper alloys

Tribological performance of Mn3(PO4)2 coating and PC/MoS2 coating in Rolling–Sliding and pure sliding contacts with gear oil

Friction and Wear Behavior of Electroless Wear-Resistant and Self-Lubricating Ni-P Composite Coatings

Friction and wear behaviors of electrodeposited Ni-P-CNTs composite coatings on Al-alloy substrate

The Wear Resistance of an Ni-Cu-P Brush Plating Layer on Different Substrates

Characterization and Tribological Behavior of Electroless-Deposited Ni-P-PTFE Films on NBR Substrates for Dynamic Contact Applications

Effects of Coating and Lubrication on Friction and Wear for Metal-to Metal Application

Tribological properties of Tin-based Babbitt bearing alloy with polyurethane coating under dry and starved lubrication conditions

Tribological performance of Ni-W/PTFE composite coating via pulse electrodeposition