Abstract:Abstract Error compensation has become an important means of improving the manufacturing and processing accuracy of computer numerical control (CNC) machine tools. Quick and precise measurement of the various geometric motion errors (GMEs) of CNC machine tools is crucial. We propose a novel laser method for the efficient and direct high-precision measurement of the 21 GMEs of a three-axis CNC machine tool, or three linear axes of a five-axis tool. A corresponding system was developed, comprising a fiber-coupled laser unit, sensor head, target unit, and beam-steering unit. The beam-steering unit was designed to perform high-accuracy 90° rotation of the measuring beam, and the target unit was designed to be sensitive to 18 GMEs of the three linear axes. Stability, repeatability, and comparison experiments were conducted to verify the performance of the proposed system. The results showed that the stability of the position error measurement is ± 6.3 nm. For straightness error measurement, the stability, repeatability error, and residual are within ± 60.3 nm, ± 0.5 μm, and ± 0.7 μm, respectively. These are within ± 0.12 arcsec, ± 0.5 arcsec, and ± 0.5 arcsec for the pitch and yaw measurements, and within ± 0.37 arcsec, ± 1.5 arcsec, and ± 1.0 arcsec for the roll measurements, respectively. For squareness error measurement, the repeatability error and residual are within ± 0.6 arcsec and ± 1.6 arcsec, respectively. Compared with a laser interferometer, the proposed system can measure the 21 GMEs of a three-axis machine tool with one-step installation. Without accuracy loss, the measurement efficiency is approximately 45 times higher than that of a laser interferometer, thus providing a new quick and accurate measurement method of GMEs and error compensation of CNC machine tools.

Development of a High Accurate Gear Measuring Machine Based on Laser Interferometry

Development of Equipment for Simultaneously Measuring Two-dimensional Rotation Angles of the Linear Guide Track

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Simultaneous Measuring Method Of Linear Guide Geometric Errors In Four-Degrees Of Freedom

Development of a simple system for simultaneously measuring 6DOF geometric motion errors of a linear guide.

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

Development of Non-Contact Automatic Thread Measuring Instrument

Acquisition and Assessment of Gear Holistic Deviations Based on Laser Measurement

Development of On-Machine Measuring System for Pitch Deviation of Large Gears

A method combining laser and vision detection for on-line measurement of small modules gears

Determination of the Accuracy of the Straight Bevel Gear Profiles by a Novel Optical Coaxial Multi-Ring Measurement Method

Gear Tooth Profile Reconstruction via Geometrically Compensated Laser Triangulation Measurements

Research on gear profile deviation detection method based on linear structured light

Design optical surface as the measurement datum in measuring gear tooth flank by symmetrical laser interferometer

Development of a new gear profile measuring machine with five-link closed-loop mechanism

Gear Profile Measurement Based on Thin Line Structured Light

Precision Detection of Small Modulus Gear Based on Polychromatic Laser Confocal Ranging Technology

TOOTH SURFACE MEASUREMENT AND MACHINE-SETTINGS CORRECTION OF SPIRAL BEVEL GEAR

Research on High-Precision Measurement Method for Small-Size Gears with Small-Modulus

A high-precision laser method for directly and quickly measuring 21 geometric motion errors of three linear axes of computer numerical control machine tools

High Precision Gear Manufacturing with Three Thermal Error Measuring Methods and Performance Comparison