Abstract:A series of sodium alginate (SA) nanocomposite films with different loading levels of graphitic-like carbon nitride (g-C3N4) were fabricated via the casting technique. The structure and morphology of nanocomposite films were investigated by X-ray powder diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. Thermogravimetric analysis results suggested that thermal stability of all the nanocomposite films was enhanced significantly, including initial thermal degradation temperature increased by 29.1 °C and half thermal degradation temperature improved by 118.2 °C. Mechanical properties characterized by tensile testing and dynamic mechanical analysis measurements were also reinforced remarkably. With addition of 6.0 wt % g-C3N4, the tensile strength of SA nanocomposite films was dramatically enhanced by 103%, while the Young's modulus remarkably increased from 60 to 3540 MPa. Moreover, the storage modulus significantly improved by 34.5% was observed at loadings as low as 2.0 wt %. These enhancements were further investigated by means of differential scanning calorimetry and real time Fourier transform infrared spectra. A new perspective of balance was proposed to explain the improvement of those properties for the first time. At lower than 1.0 wt % loading, most of the g-C3N4 nanosheets were discrete in the SA matrix, resulting in improved thermal stability and mechanical properties; above 1.0 wt % and below 6.0 wt % content, the aggregation was present in SA host coupled with insufficient hydrogen bondings limiting the barrier for heat and leading to the earlier degradation and poor dispersion; at 6.0 wt % addition, the favorable balance was established with enhanced thermal and mechanical performances. However, the balance point of 2.0 wt % from dynamic mechanical analysis was due to combination of temperature and agglomeration. The work may contribute to a potential research approach for other nanocomposites.

Preparation of Layered Graphitic Carbon Nitride/montmorillonite Nanohybrids for Improving Thermal Stability of Sodium Alginate Nanocomposites

Influence of g-C3N4 nanosheets on thermal stability and mechanical properties of biopolymer electrolyte nanocomposite films: a novel investigation

Study on thermal stability of PP/MMT nanocomposites

Preparation and characterization of organic modified montmorillonite/polylactic acid nanocomposites

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Functionalized Boron Nitride Nanosheets/Poly(l-lactide) Nanocomposites and Their Crystallization Behavior

Carbon Nanomaterial-Assisted Morphological Tuning for Thermodynamic and Kinetic Destabilization in Sodium Alanates

Effect of carbon nanotube hybrid on the microstructure and properties of AlN skeleton-reinforced highly oriented graphite flake composites

Preparation of poly(methyl methacrylate)/lanthanum hydroxide nanowire nanocomposites with improvement in thermal stability

Effect of Al2O3 coating thickness on the thermal stability of Cu–carbon nanotube hybrids

Effect of Nano-Mgo on Thermal and Mechanical Properties of Aluminate Cement Composite Thermal Energy Storage Materials

Nano Na-Montmorillonite @ Polyaniline Hybrid Composite: Effect of Nano Na-Montmorillonite Content on Structure, Thermal Stability and Electrical Properties

Preparation and Characterization of Nanocomposite Films Containing Nano-Aluminum Nitride and Cellulose Nanofibrils

Synergistic Flammability and Thermal Stability of Polypropylene/aluminum Trihydroxide/fe‐montmorillonite Nanocomposites

Investigating the thermal stability of nanocrystalline aluminum-lithium alloy by combining different mechanisms: Reinforcing with graphene and alloying with Sr

Processable Dispersions of Graphitic Carbon Nitride Based Nanohybrids and Application in Polymer Nanocomposites

Nano additives-enhanced PEG /AlN composites with high cycle stability to improve thermal and heat storage properties

Nano MgFe2O4 Incorporated PAn Hybrid Composite Containing Nano Montmorillonite: Effect of Nano MgFe2O4 Content on Structure, Thermal Stability, Electrical and Magnetic Properties

Investigation Into Poly(propylene)/Montmorillonite/Calcium Carbonate Nanocomposites

Preparation of Triple-Functionalized Montmorillonite Layers Promoting Thermal Stability of Polystyrene

In Situ Modification of Alginate Fibers by Nano-montmorillonite for Enhancing the Mechanical Properties