Abstract:The electrochemical reduction of CO 2 using copper-based electrocatalysts offers a route to produce high-value multicarbon (C 2+ ) products from renewable electricity (Nat. Catal. 4, 952-958 (2021); Nature 614, 262-269 (2023)). To date, the efficient electrocatalytic conversion of CO 2 to multicarbon products has only been possible when using impurity-free CO 2 sources, such as from direct air capture. The generation of such high-grade CO 2 streams is expensive, accounting for almost half of the total energy required for both capture and electroreduction processes (Nat. Catal. 4, 952-958 (2021)). Conversely, capturing CO 2 from point sources, such as industrial flue gas, is more efficient due to the higher concentration of CO 2 in the feed. However, trace amounts of sulfur dioxide (10 ~ 400 ppm SO 2 ) inherently present in these streams will significantly degrade the CO 2 conversion process. All previous attempts to convert CO 2 with SO 2 present in the feed have resulted in immediate catalyst poisoning and an irreversible loss of CO 2 conversion activity. In this study, we designed a modified catalyst layer to react a stream of dilute CO 2 containing 400 ppm SO 2 to multicarbon products with high stability and performance metrics that match or exceed those achieved with pure CO 2 streams. Driven by density function theory and COMSOL simulations, we designed an ionomer:copper:polytetrafluoroethylene (PTFE) (ICP) electrode that features both hydrophobic and highly-charged hydrophilic domains to limit water adsorption and promote CO 2 over SO 2 transport near the electrochemically active sites. This deactivates the SO 2 poisoning mechanism, thus enabling stable and efficient CO 2 conversion (see figure). Our approach achieved a sustained C 2+ Faradaic efficiency (FE) of 50% for the initial 160 hours at 100 mA cm-2. In order to improve the overall C 2+ current efficiency (j C2+ ) towards industrial scales, we applied our strategy in high-surface-area copper electrodes. We achieved CO 2 conversion in the presence of 400 ppm SO 2 with a C 2+ FE of 76% at a current density of 700 mA cm-2, surpassing what can be achieved in existing integrated CO 2 capture-electrolysis systems that use pure CO 2 . Overall, our approach provides a fully 140-fold increase in performance (FE C2+ × j C2+ ) compared to the best prior CO 2 conversion systems with added SO 2 (Nat. Nanotechnol. doi: 10.1038/s41565-022-01286-y (2023); J. Am. Chem. Soc. 141, 9902-9909 (2019)). These findings represent an important advancement in the field of CO 2 conversion and highlight the potential of our strategy for industrial-scale applications. Figure 1

Simultaneous Recovery of Carbon and Sulfur Resources from Reduction of CO2 with H2S Using Catalysts

High Yield of CO and Synchronous S Recovery from the Conversion of CO2 and H2S in Natural Gas Based on a Novel Electrochemical Reactor

High Yield of CO and Synchronous S Recovery from the Conversion of CO 2 and H 2 S in Natural Gas Based on a Novel Electrochemical Reactor

Methane-H2S Reforming Catalyzed by Carbon and Metal Sulfide Stabilized Sulfur Dimers

Roles of the Comproportionation Reaction in SO2 Reduction Using Methane for the Flexible Recovery of Elemental Sulfur or Sulfides.

Achieving Simultaneous CO2 and H2S Conversion Via a Coupled Solar‐Driven Electrochemical Approach on Non‐Precious‐Metal Catalysts

Recovery of Elemental Sulfur Direct from Nonferrous Flue Gas by a Low-Temperature Claus Process with H2S As the Interim Reducer

H2S Involved Photocatalytic System: A Novel Syngas Production Strategy by Boosting the Photoreduction of CO2 While Recovering Hydrogen from the Environmental Toxicant

In situ observation of the promoting effect of H2S on the formation of efficient MoS2 catalyst for CH4/CO2 reforming

Amorphous CuSbOx Composite-Catalyzed Electrocatalytic Reduction of CO2 to CO: CO2 Demand-Supply-regulated Performance

Promotion Effect of H2S at High Concentrations on Catalytic Dry Reforming of Methane in Sour Natural Gas

SO2-Tolerant Electrocatalytic Reduction of CO2 from Simulated Industrial Flue Gas

Recovery of elemental sulfur direct from nonferrous flue gas by a low-temperature Claus process with H 2 S as the interim reducer

Enhanced Reduction of Smelting Gypsum by H2S and In-Situ DRIFTs Investigated on the Mechanisms of S-O Bond Activation

Enhanced H2 Recovery by Coupling the Water-Gas Shift Reaction with in-situ CO2 Capture and Mineralization using Earth Abundant Ca- and Mg-Silicates and Hydroxides

Establishing a Self-supporting System of H2S Production from SO2 with Induced Catalytic Reduction Process for Mercury Capture with Super-large Enrichment

Catalysts for gaseous organic sulfur removal

Production of H2S with a Novel Short-Process for the Removal of Heavy Metals in Acidic Effluents from Smelting Flue-Gas Scrubbing Systems

A gas permeable membrane electrode for selective and durable H2S production from SO2

Efficiently Selective Oxidation of H 2 S to Elemental Sulfur over Covalent Triazine Framework Catalysts

Sulfur Changes the Electrochemical CO2 Reduction Pathway over Cu Electrocatalyst.