Abstract:Galvanized advanced high strength steels (AHSS) will be the most competitive structural material for automotive applications in the next decade. Oxidation of AHSS during the recrystalization annealing process in a continuous galvanizing line to a large extent influences the quality of zinc coating on the final galvanized steel product. For example, formation of oxides of alloying elements (e.g. Mn, Cr, Si) at the steel surface during annealing prior to galvanizing leads to poor adhesion of a zinc coating. Yet, knowledge on the high temperature oxidation behaviour of AHSS is rather limited. The primary aim of this thesis is to provide fundamental understanding on the kinetics of internal oxidation of AHSS during annealing. The classical Wagner internal oxidation theory for binary alloys was extended to account for multi-component alloys. To this end, a generic coupled thermodynamic-kinetic internal oxidation model based on Fick’s 1st law was developed in order to predict the kinetics of internal oxidation, as well as the concentration depth profiles of internal oxides and solute elements in alloy matrix, considering the finite solubility product of oxide precipitates, the non-ideal behaviour of solid solution and the formation of multiple type of oxide species. The internal oxidation behaviour of Fe-Mn and Fe-Mn-Cr steel alloys were experimentally studied to validate the model. It has been found that for Fe-Mn and Fe-Mn-Cr steel alloys, the effect of non-ideal behaviour of solution on internal oxidation is negligible, and local thermodynamic equilibrium is established within internal oxidation zone. Besides, the kinetics of Wustite formation on pure iron and Mn alloyed steels annealed in CO2 + CO or H2O + H2 gas mixtures as well as the reduction kinetics of the Wustite scale in Ar + H2 gas mixtures were investigated. The growth of Wustite scale on iron and Mn alloyed steels follows the linear rate law. However, adding Mn to iron, even at a relatively low concentration (say 1.7 wt%), dramatically lowers the growth rate of Wustite scale. Nevertheless, reduction kinetics of the Wustite scale on iron and Mn alloyed steels are almost the same. During the reduction process a dense iron layer is formed which separates the remaining Wustite scale from the reduction atmosphere. The rate of Wustite reduction by H2 is controlled by the diffusion of solute oxygen dissolved in the formed iron layer.

Thermodynamic and Kinetic Modelling of a Bond Coat Alloy: Oxidation Induced Depletion and Its Effect on Microstructure and Material Behavior

Microstructural Modelling Solution for Complex Co Based Alloys and Coatings

Thermodynamic, Kinetic and Mechanical Modeling to Evaluate CO2-induced Corrosion via Oxidation and Carburization in Fe, Ni alloys

Experimental study and thermodynamic modeling of the Al-Co-Cr-Ni system

Modelling compositional changes in nickel base alloy 602 CA during high temperature oxidation

Thermodynamic, Kinetic and Mechanical Modeling to Evaluate CO 2 -induced Corrosion via Oxidation and Carburization in Fe, Ni alloys

Compositional Effects on the High-Temperature Oxidation Lifetime of MCrAlY Type Coating Alloys

The Effects of Refractory Elements on Mechanical Properties in CoCrNiFe Concentrated Solid Solution Alloys Across Different Temperatures

Interdiffusion mechanism at the interface between TiAl alloy and NiCoCrAlY bond coating

Thermodynamic Simulation Calculations of Phase Transformations in Low-Aluminum Zn-Al-Mg Coatings

Effect of Co distribution on the oxidation behavior of aluminide coatings in Mo-rich Ni-based single-crystal superalloy

Influence of Re on High Temperature Oxidation Behavior of MCrAIY Type Coating Alloys

High-temperature steam oxidation behavior and failure mechanisms of Al alloyed Cr coatings on Zr-4 alloy

Deciphering the role of Al$_2$O$_3$ formed during isothermal oxidation in a dual-phase AlCoCrFeNi$_{2.1}$ Eutectic High-Entropy Alloy

Interdiffusional Degradation of Oxidation‐resistant Aluminide Coatings on Fe‐base Alloys

Effect of Cr on the Microstructure and Oxidation Properties of Co-Al-W Superalloys Studied by in Situ Environmental TEM

Oxidation phenomena in advanced high strength steels : Modelling and experiment

Modeling Oxidation of AlCoCrFeNi High-Entropy Alloy Using Stochastic Cellular Automata

Influences of Al content on oxidation behavior of CoNiCrAlYRe alloys

A Phase-Field Study on Internal to External Oxidation Transition in High-Temperature Structural Alloys

Relationship among Thermodynamic, Growth Kinetics, and Microstructure Characterization of the Simple and Silicon‐Modified Aluminide Coating on Ni‐based Superalloy