Investigation of Pulse Burst Characteristics in an LD End-Pumped Er:Yb: Glass/Co:MALO Microchip 1.5 Μ M Laser
Yulei Wang,Jianing Sun,Yindong Li,Yaoyao Qi,Jie Ding,Bingzheng Yan,Can Cui,Zhenxu Bai,Zhiwei Lu
DOI: https://doi.org/10.1016/j.infrared.2024.105282
IF: 2.997
2024-01-01
Infrared Physics & Technology
Abstract:Burst mode lasers, characterized by a sequence of high-intensity pulses, are integral to applications such as the examination of turbulent flows and optical metrology. This study investigates a 1.5 mu m passively Q-switched pulse burst microchip laser, end-pumped by a 940 nm laser diode. Utilizing Er:Yb:glass as the gain medium and Co:MALO for passive Q-switching, delivering a pulse width of 5.5 ms and a repetition rate of 10 Hz. When the initial transmittance of the saturable absorber was 93 % and the maximum absorbed pump energy reached 85 mJ, we successfully generated up to 12, 8, and 4 pulses within a burst at 1.5 mu m. These results corresponded to cavity lengths of 12 mm, 13 mm, and 14 mm, respectively. By using a saturable absorber with an initial transmittance of 90.5 %, a higher single pulse energy and a narrower pulse width were realized. The narrowest pulse width was reduced to 6.2 ns, with a corresponding single pulse energy of 272 mu J. The peak power in the Er: Yb:glass/Co:MALO pulse burst laser reached an estimated 43.9 kW. This research provides valuable experimental and theoretical insights for the development of human eye-safe lasers with adjustable pulse sequences.