Abstract:Dc conduction through dielectric insulating materials has been the subject of intensive theoretical and experimental investigations in the study of dielectric material. It has been reported that the conduction current of multilayer ceramic capacitors at elevated temperature could be correlated to a thermally activated ionic transition process. In this paper, the conduction processes in BaTiO3 based multilayer ceramic capacitors (MLC) at room and elevated temperature were discussed from the dc conduction measurements. It was found that the dc conduction processes were different at these two temperatures.At the elevated temperature, the conduction current could be caused by a thermally activated ionic transition process described. The hopping distance of dielectric material was calculated to be 60.3A, the carrier mobility of the electrical conduction was computed to be the order of 10-12cm2/V.s. It was estimated that the effective onset voltage of ionic conduction was higher than 6.9×104V.cm-1.The conduction process at room temperature was also detail discussed. It was found that dc conduction currents in MLC at room temperature were consistent with the values predicted by a theory based on the conventional thermally activated electronic injection process. It was obtained that the Ohmic field of MLC was lower than 55kV/cm. The resistivity of MLC was calculated to be 1.8×10-13Ω.cm when subtracted the Ohmic current from the total measured current. It was estimated that the effective Schottky field was higher than 1.1×105V.cm-1. From these results, it is concluded that electronic conduction based on the Schottky mechanism may dominate the conduction current of MLC at room temperature.It was presumed that the migration ion density in the bulk of dielectric material which changed with the temperature, was responsible for the different conduction processes.

An Investigation on Dc Conduction in Multilayer Ceramic Capacitors

An Investigation On Dc Conduction In Ceramic Capacitors

Dielectric Behaviour of Batio3-Based Ceramic Multilayer Capacitors under High Dc Bias Field

Depressed DC Breakdown Phenomena near Curie Temperature of BaTiO<sub>3</sub>-Based Ceramic Capacitors

Depressed DC Breakdown Phenomena Near Curie Temperature of BaTiO3-Based Ceramic Capacitors

Dielectric Responses of Modified BaTiO3 Ceramics in Multilayer Ceramic Capacitors to the Combined Uniaxial Stress and Dc Bias Field

Direct observation of local dielectric conductive paths and their dynamics in the degraded multilayer ceramic capacitors

Investigation on the inter-diffusion and microstructure in multilayer ceramic capacitors

Influences of Barrier Height and Space Charge on DC Breakdown in BaTiO/sub 3/-Based Ceramic Capacitors

Effect of Combined External Uniaxial Stress and Dc Bias on the Dielectric Property of Batio3-Based Dielectrics in Multilayer Ceramic Capacitor: Thermodynamics and Experiments

Investigation of ferroelectric phase transition for modified barium titanate in multilayer ceramic capacitors by in situ Raman scattering and dielectric measurement

Influence of inner electrode on the microstructure of BZN based MLC

Evaluation of Residual Stress in a Multilayer Ceramic Capacitor and its Effect on Dielectric Behaviors Under Applied dc Bias Field

High DC-Bias Stability and Reliability in BaTiO3-Based Multilayer Ceramic Capacitors: the Role of the Core-Shell Structure and the Electrode

Observation on the Interdiffusion in Multilayer Ceramic Capacitors

The effects of solid-state and hydrothermal synthesis methods of BaTiO3 on the reliability of multilayer ceramic capacitors

Interfacial Diffusion Behavior in Ni-Batio3 Mlccs with Ultra-Thin Active Layers

Polarization Response and Thermally Stimulated Depolarization Current of BaTiO3‐based Y5V Ceramic Multilayer Capacitors

Defect Dipole Engineering Enhanced the Dielectric Performance and Reliability of Mn-doped BaTiO3-based Multilayer Ceramic Capacitor

An investigation on the on dielectric, ferroelectric properties and failure mechanism for the 0805X7R multi-layer ceramic capacitor

High DC-Bias Stability and Reliability in BaTiO 3 -Based Multilayer Ceramic Capacitors: The Role of the Core-Shell Structure and the Electrode