Abstract:To ascertain the crack growth behavior and coalescence mechanism in thermal barrier coatings (TBCs) is beneficial for understanding the failure of TBCs and proposing the probable optimization methods. In this work, a novel lamellar structure model with real interface morphology is developed to explore the crack growth behavior and the failure mechanism of TBCs during thermal cycling. Three typical defects which include pore, inter-splat crack, and intra-splat are incorporated in the model. To simulate the oxidation process of the bond coat (BC) realistically, The oxidation growth process is simulated via changing the BC properties to thermally grown oxide (TGO) properties layer by layer. The effects of the lateral growth strain distribution through TGO thickness on the stress states are executed. Moreover, the influences of BC creep on the crack growth and coating lifetime are further elaborated. The results show that the larger the lateral growth strain gradient, the smaller the residual tensile stress. The irregular interface morphology results in the redistribution of residual stresses. Although the pores and cracks can alleviate the tensile stress near the valley, large stress concentration will occur near them. At the early phase of thermal cycling, the cracks grow steadily. After more cycles, the cracks propagate rapidly and merge with others. The simulated delamination path is in agreement with the experiment results. Not only does BC creep change the crack coalescence mechanism, it also decreases the thermal cyclic lifetime of TBCs. The coating optimization method proposed in this study provides another option for developing advanced TBCs with longer lifetime.

Characterisation of Cracks in Thermal Barrier Coatings using Impedance Spectroscopy

A Diffusion-Coupled Cohesive Element Model for Cracking Analysis of Thermal Barrier Coatings

Nondestructive Evaluation Of Thermal Barrier Coatings Using Impedance Spectroscopy

Competition Mechanism of Interfacial Cracks in Thermal Barrier Coating System

Effect Of Periodic Surface Cracks On The Interfacial Fracture Of Thermal Barrier Coating System

Dynamic Crack Growth Mechanism and Lifetime Assessment in Plasma Sprayed Thermal Barrier System Upon Temperature Cycling

Microcrack Morphology in the Thermal Insulation Performance of 8YSZ Thermal Barrier Coatings: A Mesoscale Numerical Study

Investigation of Crack Propagation Behavior of Thermal Barrier Coatings Fabricated by Atmospheric Plasma Spraying in the Process of Uniaxial Tension Using Acoustic Emission Technique

Discrete element modeling of effect of interfacial roughness and pre-crack on crack propagation in thermal barrier coatings

Assessment of Stress Characteristic and Interfacial Delamination in Thermal Barrier Coatings Considering the Connected Crack Network

A Simulation Study on the Crack Propagation Behavior of Nanostructured Thermal Barrier Coatings with Tailored Microstructure

The failure mechanisms of TBC structure by moiré interferometry

Thermal cycling induced crack nucleation and propagation in thermal barrier coating system

Mechanisms Governing the Failure Modes of Dense Vertically Cracked Thermal Barrier Coatings

Peridynamic-based investigation of the cracking behavior of multilayer thermal barrier coatings

Simulation of Residual Stresses and Their Effects on Thermal Barrier Coating Systems Using Finite Element Method

Mechanical and electrical characterisation of a phase transformation in thermal barrier coatings

Stress Profile and Crack Evolution in a Three-Dimensional (3D) Thermal Barrier Coatings During Isothermal Cyclic Test

Stress States and Crack Behavior in Plasma Sprayed TBCs Based on a Novel Lamellar Structure Model with Real Interface Morphology

Study on Spalling Mechanism of APS Thermal Barrier Coatings Considering Surface Vertical Crack Evolution Affected by Surrounding Cracks

Comprehensive Understanding of Horizontal and Vertical Crack Effects on Failure Mechanism of Lamellar Structured Thermal Barrier Coatings