Abstract:The increasing number of deep-buried high geothermal tunnels with extra-long one-end ventilation distance makes it critical to develop an accurate and efficient computational model to predict the ambient temperature of such tunnels. A numerical model capable of quickly calculating the longitudinal temperature field of the tunnel construction environment has been established by combining the finite difference method and finite element software. The model, which accounts for the initial ground temperature distribution as well as the heat ex-changes at the working face, agrees well with the field monitoring results of the Dechang Tunnel. The research results show that the air temperature during tunnel construction varies as follows: stable heating section in the duct -> rapid heating section near the working face -> slow heating section of the return air -> temperature drop section of the return air. The temperature of the characteristic sections (duct outlet, working face, and tunnel maximum temperature section) all show a quadratic function upward with construction length (L). These also show an exponential trend with ventilation volume (v), insulated duct thickness (t1), and tunnel insulation layer thickness (t2). To achieve a temperature change slope greater than 0.5 in the working face of the Dechang tunnel, the recommended criteria include a ventilation volume below 110 m3/s, an insulated duct thickness below 3 cm, and a tunnel insulation layer thickness below 7 cm. The research results can provide a basis for ventilation and heat insulation design of the extra-long high geothermal tunnel.

A Study on the Influence of Air Vents Arrangement in Natural Ventilated Tunnels

Numerical study of natural ventilation in urban shallow tunnels: Impact of shaft cross section

Analytical and Numerical Study on Natural Ventilation Performance in Single- and Gable-Slope City Tunnels

On the Mechanism and Influence of the Delayed Effect of Longitudinal Ventilation in Urban Tunnels

Study on the number and spacing of ventilation shafts in a highway tunnel with longitudinal ventilation

Study on the Air Inlet Velocity and Temperature Distribution in an Inclined Tunnel with Single Shaft under Natural Ventilation

Experimental study of natural ventilation for road tunnels with shafts

Studying on Air Flow and Pollution of Natural Ventilation Tunnel with Shafts

Similarity Theory in a Model Test for the Natural Ventilation of Urban Tunnels

A Numerical Study on the Effects of Naturally Ventilated Shaft and Fire Locations in Urban Tunnels

Numerical analysis of different ventilation schemes during the construction process of inclined tunnel groups at the Changheba Hydropower Station, China

A Study on the Behavior Characteristics of Air Supply during Tunnel Fires under Natural Ventilation with Multiple Vertical Shafts

Numerical Simulation on Ventilation Performance of Vent Shafts in a Subway Tunnel

Air Temperature Distribution Inside of A Longitudinal Highway Tunnel: A Case Study

Thermal Environment Simulation and Ventilation Strategy in Tunnels for Heating Pipes and Power Cables

Natural wind utilization in the vertical shaft of a super-long highway tunnel and its energy saving effect

Field Test and Numerical Investigation on Thermal Environment of Tunnel with Air Layer Structure

Test research of tunnel fire with natural ventilation

Effects of vertical shaft arrangement on natural ventilation performance during tunnel fires

Study on Temperature Field and Influencing Factors of the High Geothermal Tunnel with Extra-Long One-End Construction Ventilation

Ventilation mechanism test system for natural ventilation tunnel