Abstract:In recent years, the liquid temporary plugging agent has drawn extensive attention, especially in the repeated fracturing operation for stimulating unconventional oil and gas reservoir production. This paper developed a novel self-degradable gel (SDG) as a liquid temporary plugging agent for high-temperature reservoirs. The gelation process, viscoelasticity, pressure-bearing capacity, self-degradation, and formation protection performance of the SDG were systematically investigated. Moreover, the gelation and self-degradation mechanism of the SDG were revealed by studying the viscosity variation and the microstructures. Considering the gelation time and gel strength, the composition of the SDG was optimized as 6.0–10.0 wt% monomer, 0.004–0.012 wt% initiator, and 0.2–0.4 wt% crosslinker. The SDG transformed from liquid to solid-like gel within 30 to 90 min at 90–130 °C. The rheological results showed that the duration of the low viscosity state exceeded 75 % of the total gelation process at high temperatures, which was conducive to the injection of the SDG. In addition, the viscosity of the SDG after gelation was more than 100 Pa·s, which ensured its effective plugging in fractures. The experimental results with fractured cores showed that the bearing pressure of the SDG remained above 30 MPa/m in fracture with a width of 2.05–5.04 mm, which could meet the requirements of the repeated fracturing operation. Moreover, the SDG could spontaneously degrade from solid-like gel to liquid with a viscosity of lower than 10 mPa·s in 10–105 h at 90–130 °C. The broken-gel liquid could be completely displaced out of the fractured core, and the core damage rate was less than 5.0 %, which ensured the restoration of conductivity of the previously existing fractures. Micrographs showed that the dense three-dimensional network structure with high viscosity was formed by polymerization and crosslinking. Then, the acrylic acids in the polymer chain were broken at high temperatures, resulting in the gradual destruction of the gel and the spontaneous degradation of SDG.

Synthesis and Performance Evaluation of a New Kind of Gel Used As Water Shutoff Agent

Properties of a Poly(acrylamide‐co‐diallyl Dimethyl Ammonium Chloride) Hydrogel Synthesized in a Water–ionic Liquid Binary System

Preparation and Characterization of Temperature-Sensitive Gel Plugging Agent

High-Temperature-Resistant, Low-Concentration Water-Controlling Composite Cross-Linked Polyacrylamide Weak Gel System Prepared from Oilfield Sewage

New Insights and Experimental Investigation of High-Temperature Gel Reinforced by Nano-SiO2

Development and evaluation of organic/inorganic combined gel for conformance control in high temperature and high salinity reservoirs

Lignocellulosic hydrogel for profile control and water plugging in high salt reservoirs

Novel Gel with Controllable Strength for In-Depth Conformance Control: Bulk Gelation Performance and Propagation Properties in Porous Media

Experimental Investigation of a Novel Nanocomposite Particle Gel for Water Shutoff Treatment in Mature Oilfields

The Development and Performance Evaluation of Green Cross-Linked Movable Gel

Optimization of the Methods to Develop Stable Polymer Gels for Water Management in Medium- and Ultra-High-Salinity Reservoirs

Evaluation of novel organically crosslinked polymer gel for water shut-off purposes

Polyvinyl alcohol composite gel membrane modified by natural polysaccharide and waterborne polyurethane

Preparation Method and Performance Evaluation of a Gel Based on AM/AMPS Copolymer

A Novel Branched Polymer Gel System with Delayed Gelation Property for Conformance Control

Water-Driven Sol-Gel Transition in Native Cellulose/1-Ethyl-3-methylimidazolium Acetate Solutions

Delayed Crosslinking Amphiphilic Polymer Gel System with Adjustable Gelation Time Based on Competitive Inclusion Method

Thermally Induced Gel from Cellulose/naoh/peg Solution: Preparation, Characterization and Mechanical Properties

A “bird nest” bioinspired strategy deployed for inducing cellulose gelation without concomitant dissolution

A novel self-degradable gel (SDG) as liquid temporary plugging agent for high-temperature reservoirs

Synthesis and Performance Evaluation of a Novel Heat and Salt-Resistant Gel Plugging Agent