Abstract:As a novel renewable energy cell type, flat tubular solid oxide fuel cell (FT-SOFC) has the advantages of easy sealing, low resistance, and better stability. Optimization for fuel cell output performance was traditionally implemented through the combination and comparison of a set of experiments or simulations. Optimization algorithms are rarely used in the single cell field. This work contributes to the fuel cell development on performance optimization by combining the numerical simulation with the Nelder-Mead simplex optimization algorithm, where multi-variables are optimized simultaneously. The numerical model is developed based on the constructed three-dimensional FT-SOFC model which fully couples the chemical and physical processes. The dependence of cell performance on a variety of operating and structural characteristics is studied, and five strong correlation parameters are selected as decision variables. Through the simulation-based optimization framework, an optimal combination of these parameters for the maximum power density is obtained. Compared with the original FT-SOFC, the average current density and average power density of the optimized cell is increased by 10.4% and 9.0%, respectively. The optimal solution tends to adopt a higher reactant concentration, and a superior proportion of inlet/outlet width is acquired. In particular, the optimized wide inlet and narrow outlet channel contributes to even current density distribution. The results highlight that the simulation-based optimization has great potential in fuel cell improvements as well as the broad renewable energy application.

High Efficiency Thermoelectric Cooperative Control of a Stand-Alone Solid Oxide Fuel Cell System with an Air Bypass Valve

An Optimization and Fast Load-Oriented Control for Current-Based Solid Oxide Fuel Cell System

Thermal Management of Reversible Solid Oxide Cells in the Dynamic Mode Switching

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Optimization and Control for Solid Oxide Fuel Cell System Hybrid DC Microgrids from the Perspective of High Efficiency, Thermal Safety, and Transient Response

A Novel Control Scheme to Mitigate Temperature Profile Variation in a SOFC System

Thermal Management of Bypass Valves for Temperature Difference Elimination in a 5 Kw Multi-Stack Solid Oxide Fuel Cell System

A Novel SOFC Thermal Management Strategy of SOFC-GT Hybrid System With Anode and Cathode Control Loops

Transient Performance Analysis of a Solid Oxide Fuel Cell During Power Regulations with Different Control Strategies Based on a 3D Dynamic Model

A Novel Control Strategy with an Anode Variable Geometry Ejector for a SOFC-GT Hybrid System

Study on Control Strategy for a SOFC-GT Hybrid System with Anode and Cathode Recirculation Loops

A Multi-loop Control Strategy for 5 Kw Solid Oxide Fuel Cell Hybrid System

Feedforward and Desired Dynamic Equation Control for Solid Oxide Fuel Cell System.

Study on an Adaptive Multi-Model Predictive Controller for the Thermal Management of a SOFC-GT Hybrid System

Constrained Predictive Controller Design Based on Fuel Exhaustion and Thermal Constraints of A 5 kW SOFC Stack

Coordinated Control Strategies for Fuel Cell Power Plant in a Microgrid

A Practical Compound Controller Design for Solid Oxide Fuel Cells

Comparison of Three Different Control Strategies for Load-Change and Attenuation of Solid Oxide Fuel Cell System

A Feasible Way to Handle the Heat Management of Direct Carbon Solid Oxide Fuel Cells

Comparison of Different Fuel Cell Temperature Control Systems in an Anode and Cathode Ejector-Based SOFC-GT Hybrid System

A Novel Application of Bypass Valve for Temperature Difference Mitigation Between the Multi-Stack in a 5kw Solid Oxide Fuel Cell System