Abstract:Icing of water (moisture) at subzero temperatures with different length scales is harmful to a variety of applications spanning from large-scale aircraft to small camera lens. Existing strategies relying on controlling the surface structure and material are encumbered with shortcomings of short frost delay time, poor durability, and difficulty in large-scale production. Inspired from the mucus secretion of mollusks, we introduce organohydrogel dynamic interfaces that can perform dynamic and reversible exchange of the cryoprotectant and water at the interface, resulting in exceptional antifrosting, antiadhesion, and deicing properties with long-term durability. The replenishable coating shows superlubrication to the surface ice with a sliding angle up to 1.9 ± 0.4<sup>o</sup> and a frost delay time up to 970 ± 31 min in the presence of water spray (99% relative humidity) at subzero temperatures. The strategy offers a reliable and scalable solution to prevent engineering surfaces, i.e., aircraft, pavement, bridge, and other public facilities, from icing/frosting and ice adhesion, even under extreme cold environments.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c17163?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c17163</a>.Experimental setups for the measurement of the sliding angle and the frosting resistance (Figures S1 and S2), deicing process of EG gelatin-coated glass and pure different cryoprotectants (Figure S3 and S4), adhesion strength to ice of the ODIs (Figure S5), the dependence of sliding angle for 1 month storing (Figure S6), bonding strength between gelatin organohydrogels and glass substrates (Figure S7), contact angle of the gelatin and gelatin organohydrogel coated on glass substrates (Figure S8), frosting process on different surfaces and various CPT-based double network organohydrogels (Figure S9), EG-patterned gelatin-coated glass substrates enabling the sliding of ice cubes (Figure S10), antifrosting for different substrates and devices (Figure S11), summary of adhesion strength and frost delay time of different anti-icing strategies (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17163/suppl_file/am0c17163_si_001.pdf">PDF</a>)Videos of adhesion and sliding of ice on glass substrates before and after coating with ethylene glycol (EG) gelatin organohydrogels (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17163/suppl_file/am0c17163_si_002.mp4">MP4</a>)Videos of adhesion and antiadhesion between biological tissues and substrates (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17163/suppl_file/am0c17163_si_003.mp4">MP4</a>)Videos of frosting and antifrosting on the surfaces of untreated glass (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17163/suppl_file/am0c17163_si_004.mp4">MP4</a>)Selective frosting on surfaces enabled by the patterning of EG on gelatin hydrogels, indicating spatial antifrosting control (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17163/suppl_file/am0c17163_si_005.mp4">MP4</a>)Frost protection of substrates and devices with complex surface morphologies at −20 °C achieved by coating them with EG gelatin organohydrogels (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17163/suppl_file/am0c17163_si_006.mp4">MP4</a>)Frost protection of substrates and devices with complex surface morphologies at −20 °C achieved by coating them with EG gelatin organohydrogels (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17163/suppl_file/am0c17163_si_007.mp4">MP4</a>)This article has not yet been cited by other publications.

Organogel As Durable Anti-Icing Coatings

Highly Stable Amphiphilic Organogel with Exceptional Anti-icing Performance

Low modulus of polydimethylsiloxane organogel coatings induced low ice adhesion

Bioinspired Tough Organohydrogel Dynamic Interfaces Enabled Subzero Temperature Antifrosting, Deicing, and Antiadhesion

Self‐Lubricative Organic–Inorganic Hybrid Coating with Anti‐Icing and Anti‐Waxing Performances by Grafting Liquid‐Like Polydimethylsiloxane

Hydrogels as Durable Anti-Icing Coatings Inhibit and Delay Ice Nucleation

Oil-Infused Superhydrophobic Silicone Material for Low Ice Adhesion with Long-Term Infusion Stability

Icephobic Coating Based on Epoxy/Polydimethylsiloxane Interpenetrating Polymer Network Gel

Designing Self-Sustainable Icephobic Layer by Introducing a Lubricating Un-Freezable Water Hydrogel from Sodium Polyacrylate on the Polyolefin Surface

Self-Deicing Electrolyte Hydrogel Surfaces with Pa-level Ice Adhesion and Durable Antifreezing/Antifrost Performance

Anti-icing propylene-glycol materials

Bioinspired Multifunctional Anti-icing Hydrogel

3D Liquid-Based Porous Coating Integrated with Oleophilic MXene Nanoflakes for Durable Ultra-Low Ice Adhesion and Exceptional Photothermal Slippery Properties

"Honeycomb" Photothermal Lubricated Porous Foam with Low-Temperature, Weak-Light, Anti-Icing/Deicing, and Long-Lasting Lubrication Properties

Robust and durable self-lubricated surface by facile fabrication for anti-icing/deicing

An extreme environment-tolerant anti-icing coating

Spraying Fabrication of Durable and Transparent Coatings for Anti-Icing Application: Dynamic Water Repellency, Icing Delay, and Ice Adhesion

Ultralong Inhibition of Heterogeneous Ice Nucleation by Robust Anti-Freezing Coating with Self-Lubricating Ionic Salts Layer

Hydro- and Icephobic Properties and Durability of Epoxy Gelcoat Modified with Double-Functionalized Polysiloxanes

Durable anti-icing coating with stability based on self-regulating oil storage layer

Fabrication of a Porous Slippery Icephobic Surface and Effect of Lubricant Viscosity on Anti-Icing Properties and Durability