Novel silicon Polarization Beam Splitter with a Horizontal Hybrid Nanoplasmonic Waveguide

daoxin dai,xiaowei guan,hao wu

DOI: https://doi.org/10.1364/acpc.2014.ath1b.4

2014-01-01

Abstract:A low-loss polarization beam splitter (PBS) with high performance based on a horizontal hybrid nanoplasmonic waveguide is proposed. The extinction ratios at central wavelength are 21.3 dB and 17.9 dB for TM and TE polarizations.

What problem does this paper attempt to address?

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Qinghuan Xu,Jifang Tao,Chonglei Sun,Jia Zhao,Zuojia Wang,Liuge Du,Chuanning Niu,Xun Li,Weiping Huang

DOI: https://doi.org/10.1016/j.optcom.2019.124424

IF: 2.4

2020-01-01

Optics Communications

Abstract:A high-performance polarizing beam splitter (PBS) is demonstrated by using asymmetrical directional couplers on a 220nm-thick silicon-on-insulator (SOI) photonics platform. The extinction ratio of the PBS with cascaded directional couplers is > 35 dB for both TE and TM polarizations around the central wavelength of 1550 nm. The bandwidths for an extinction ratio of 20 dB and 30 dB are 275 nm and 230 nm, respectively, for TE polarization, as well as > 300 nm and 225 nm, respectively, for TM polarization. The insertion losses for TE polarization are < 0.5 dB with a bandwidth of > 300 nm. The insertion losses for TM polarization are < 1 dB and < 0.5 dB with a bandwidth of 218 nm and 174 nm, respectively.
High-extinction-ratio Silicon Polarization Beam Splitter with Tolerance to Waveguide Width and Coupling Length Variations.

Yong Zhang,Yu He,Jiayang Wu,Xinhong Jiang,Ruili Liu,Ciyuan Qiu,Xiaoqing Jiang,Jianyi Yang,Christine Tremblay,Yikai Su

DOI: https://doi.org/10.1364/oe.24.006586

IF: 3.8

2016-01-01

Optics Express

Abstract:We demonstrate a compact silicon polarization beam splitter (PBS) based on grating-assisted contradirectional couplers (GACCs). Over 30-dB extinction ratios and less than 1-dB insertion losses are achieved for both polarizations. The proposed PBS exhibits tolerance in width variation, and the polarization extinction ratios remain higher than 20 dB for both polarizations when the width variation is adjusted from + 10 to -10 nm. Benefiting from the enhanced coupling by the GACCs, the polarization extinction ratio can be kept higher than 15 dB and the insertion loss is lower than 2 dB for both polarizations when the coupling length varies from 30.96 to 13.76 μm.
A Compact Ultrabroadband Polarization Beam Splitter Utilizing a Hybrid Plasmonic Y-Branch

Ting Hu,Haodong Qiu,Zecen Zhang,Xin Guo,Chongyang Liu,Mohamed S. Rouifed,Callum G. Littlejohns,Graham T. Reed,Hong Wang

DOI: https://doi.org/10.1109/jphot.2016.2585113

IF: 2.4

2016-01-01

IEEE Photonics Journal

Abstract:A compact and ultrabroadband polarization beam splitter (PBS) utilizing a hybrid plasmonic Y-branch (HPYB) on a silicon-on-insulator (SOI) platform is proposed and numerically demonstrated. The HPYB consists of a vertical hybrid plasmonic waveguide (HPW) and a horizontal HPW formed by silicon (Si) and silver (Ag) strip waveguides sandwiched with a silicon dioxide (SiO2) layer, in which the vertical and horizontal hybrid plasmonic modes (HPMs) are excited by the input transverse electric (TE) and transverse magnetic (TM) modes, respectively. The HPMs are split into different ports and coupled back to TE and TM modes to implement the polarization splitting function. A simplified and compact HPYB is robust for the HPMs' generation. The structure is wavelength insensitive since the HPMs' excitation is weakly correlated to the optical wavelengths. The simulation results show that the HPYB-based PBS has a compact footprint of $5 \times 1.8\ \mu\text{m}^2$ and an ultralarge working bandwidth of 285 nm, with the polarization crosstalk <; -10 dB and the worst-case TE (TM) mode insertion loss of -1.53 (-2.35) dB. The device also exhibits a large fabrication tolerance of 210-nm variation (from -100 to 110 nm) to the waveguide width for both polarizations.
An Asymmetrical Sinx-Based Polarization Beam Splitter at 810 Nm

Shisong Luo,Dongning Liu,Jiaquan Kong,Zengkai Shao,Zeru Wu,Pengfei Xu,Guoxuan Zhu,Yi Wang,Lin Liu,Yanfeng Zhang,Yujie Chen,Siyuan Yu

DOI: https://doi.org/10.1364/acpc.2017.s3d.5

2017-01-01

Abstract:An asymmetrical SiNx-based polarization beam splitter at 810 nm are proposed and fabricated in this work. The simulation results show that the extinction ratio of > 20 dB and the insertion loss of < 0.6 dB can be achieved for both transverse-electric (TE) and transverse magnetic (TM) polarizations at 810 nm.
Polarization beam splitter based on a silicon nitride-silica-silicon horizontal slot waveguide

Yang Liu,Limin Chang,Zezheng Li,Lei Liu,Huan Guan,Zhiyong Li

DOI: https://doi.org/10.1364/OL.44.001335

2019-03-15

Abstract:A novel compact polarization beam splitter (PBS) based on a silicon nitride-silica-silicon horizontal slot waveguide is numerically proposed, to the best of our knowledge. In the slot waveguide, the transverse electric (TE) mode propagates through the silicon layer, while the transverse magnetic (TM) mode is confined in the slot region. By utilizing an asymmetric directional coupler (DC) and bent directional coupler (bent DC) consisting of a slot waveguide and a thin silicon waveguide, PBSs with 14.6 μm (DC) and 5.2 μm (bent DC) coupling regions are obtained. Without cascading other structures, the DC PBS shows a low insertion loss (IL) of 0.4 (0.2) dB and high extinction ratio (ER) of 31.56 (24.61) dB for a TE (TM) port around 1.55 μm, while the IL and ER of the bent DC PBS are 0.4 (0.15) dB and 35.83 (21.74) dB, respectively. The proposed PBSs also have a good fabrication tolerance and broad bandwidth (>40 nm) for an ER of >20 dB.
Particle Swarm Optimized Polarization Beam Splitter Using Metasurface-Assisted Silicon Nitride Y-junction for Mid-Infrared Wavelengths

Bohao Zhang,Weiwei Chen,Pengjun Wang,Shixun Dai,Hongxiang Li,Hao Lu,Jian Ding,Jun Li,Yan Li,Qiang Fu,Tingge Dai,Yuehai Wang,Jianyi Yang

DOI: https://doi.org/10.1016/j.optcom.2019.06.057

IF: 2.4

2019-01-01

Optics Communications

Abstract:A polarization beam splitter based on metasurface-assisted silicon nitride Y-junction for mid-infrared wavelengths is proposed and numerically investigated. By properly selecting the structural parameters using the finite difference time domain method and particle swarm optimization algorithm, the input fundamental transverse-magnetic (TM0) and transverse-electric (TE0) modes can be converted and separated from each other with high efficiency. Simulation results exhibit that the conversion efficiencies for TM0-to-TE1 polarization and TE0-to-TM0 polarization are respectively 97.4% and 97.6%. At the mid-infrared wavelength of 2. 5μm, the polarization extinction ratios of the designed PBS with the input TM0 and TE0 modes are 27.45 and 27.61 dB. The corresponding insertion losses are 0.21 and 0.31 dB. Within a bandwidth from 2. 45μm to 2.55μm, the polarization extinction ratio is greater than 19.48 dB and the insertion loss is less than 1.41 dB.
Silicon Polarization Beam Splitter at the 2 Μm Wavelength Band by Using a Bent Directional Coupler Assisted with a Nano-Slot Waveguide.

Xinyu Liu,Dajian Liu,Daoxin Dai

DOI: https://doi.org/10.1364/oe.403932

IF: 3.8

2020-01-01

Optics Express

Abstract:A silicon-based polarizing beam splitter (PBS) working at the 2 μm wavelength band is proposed and demonstrated experimentally by using a bent directional coupler assisted with a nano-slot waveguide. The nano-slot width is chosen as 180 nm so that the present PBS can be fabricated with MPW foundries. In theory, the designed PBS has extinction ratios (ERs) of >15 dB and >30 dB for TM- and TE- polarizations in the wavelength range of 1825-2020 nm, respectively. For the fabricated PBS, the excess losses (ELs) are low (∼0.5 dB) while the measured results show the ERs are >15 dB and >20 dB for TM- and TE-polarizations in the wavelength band of 1860-1980 nm.
Novel High-Performance Polarization Beam Splitter on Silicon

Hao Wu,Daoxin Dai

DOI: https://doi.org/10.1364/acpc.2016.af3b.4

2016-01-01

Abstract:A high-performance silicon-based PBS is realized with a footprint of $\sim 4\times 15\mu \mathrm{m}^{2}$ by utilizing structure of cascaded bent direction couplers. The PBS has very high ER (>25dB) and low excess loss (<0.9dB) over a broad band.
High-Performance Polarizing Beam Splitters Based on Cascaded Bent Directional Couplers

Hao Wu,Daoxin Dai

DOI: https://doi.org/10.1109/LPT.2017.2657539

IF: 2.6

2017-01-01

IEEE Photonics Technology Letters

Abstract:A fabrication-tolerant high-performance polarizing beam splitter (PBS) is proposed and demonstrated with silicon-on-insulator nanowire waveguides. This PBS is realized with cascaded bent direction couplers, which is designed to make the phase-matching condition satisfied for the transversemagnetic (TM) polarization mode. There is significant phasemismatch for the transverse-electric (TE) polarizat...
Ultracompact and broadband polarization beam splitter utilizing the evanescent coupling between a hybrid plasmonic waveguide and a silicon nanowire

Xiaowei Guan,Hao Wu,Yaocheng Shi,Lech Wosinski,Daoxin Dai

DOI: https://doi.org/10.1364/ol.38.003005

IF: 3.6

2013-08-07

Optics Letters

Abstract:An ultracompact polarization beam splitter (PBS) is proposed based on an asymmetrical directional coupler consisting of a silicon hybrid plasmonic waveguide (HPW) and a silicon nanowire. The widths of the two coupling waveguides are chosen so that the phase-matching condition is satisfied for TE polarization only while the phase mismatch is significant for TM polarization. A sharply bent silicon HPW is connected at the thru port to play the role of polarizer by utilizing its polarization-dependent loss. With the present principle, the designed PBS has a footprint as small as only ~1.9 μm × 3.7 μm, which is the shortest PBS reported until now, even when large waveguide dimensions (e.g., the waveguide widths w(1,2) = ~300 nm and the gap width w(gap) = ~200 nm) are chosen to simplify the fabrication process. The numerical simulations show that the designed PBS has a very broad band (~120 nm) with an extinction ratio >12 dB and a large fabrication tolerance to allow a waveguide width variation of ± 30 nm.

optics
Compact Polarization Splitter Based on Silicon Grating-Assisted Couplers

Huiye Qiu,Yuxia Su,Ping Yu,Ting Hu,Jianyi Yang,Xiaoqing Jiang

DOI: https://doi.org/10.1364/ol.40.001885

2015-01-01

Abstract:Compact polarization beam splitter (PBS) based on grating-assisted couplers is proposed by utilizing contra-directional coupling between two corrugated strip waveguides. The co-directional coupling in the device is greatly suppressed by the designed asymmetric structure. The phase matching condition is only satisfied for TE polarization at the central wavelength of 1550 nm by a spatially periodic refractive-index perturbation. Due to the contra-directional coupling, the device breaks the limit of the precise control of the coupling strength and length. The simulation results show that the presented PBS, with a coupling length of only 19 μm, has a broad working bandwidth (∼40 nm) for a crosstalk below -12 dB. A large fabrication tolerance (±40 nm) for the waveguide width is also achieved.
High Extinction-Ratio Compact Polarisation Beam Splitter on Silicon

Sitao Chen,Hao Wu,Daoxin Dai

DOI: https://doi.org/10.1049/el.2016.0683

2016-01-01

Electronics Letters

Abstract:A novel polarisation beam splitter (PBS) with a high extinction ratio in a broad band has been proposed and realised by cascading a bent directional coupler and a low-loss transverse-magnetic (TM)-pass polariser based on a subwavelength grating. The realised PBS has a footprint as small as 3 x 22.5 mu m, a high extinction ratio (> 20 dB) and a low excess loss (similar to 1 dB) are obtained over a broad band of similar to 60 nm for both transverse-electric and TM polarisations.
Silicon Polarization Beam Splitter Based on an Asymmetrical Evanescent Coupling System with Three Optical Waveguides

Daoxin Dai

DOI: https://doi.org/10.1109/jlt.2012.2218217

IF: 4.7

2012-01-01

Journal of Lightwave Technology

Abstract:A short polarization beam splitter (PBS) is presented based on an asymmetrical evanescent coupling system, which consists of a narrow input waveguide, a narrow output waveguide, and a wide middle optical waveguide between them. The width of the waveguides is designed so that the phase-matching condition is satisfied for the TM fundamental (TM0) mode in the narrow input/output waveguide and the first higher order TM (TM1) mode in the wide middle waveguide. Meanwhile, there is a significant phase mismatch for the case with TE polarization. Therefore, for the launched TE polarized light, almost no coupling happens when it goes through the coupling region and finally the TE polarized light is output from the through port. For the launched TM0 mode in the narrow input waveguide, it is completely coupled to the TM1 mode in the wide middle waveguide by choosing the optimal length of the coupling region. Furthermore, the TM1 mode excited in the wide middle waveguide is then coupled to the TM0 mode in the narrow output waveguide through the evanescent coupling between them. A short (similar to 25 mu m long) PBS is designed based on silicon-on-insulator nanowires, while the gap width is chosen as large as 300 nm to make the fabrication easy. Numerical simulations show that the present PBS has a good fabrication tolerance for the variation of the waveguide width ( more than +/- 20nm) and a broadband (similar to 50 nm) for an extinction ratio of >15 dB.
Ultra-broadband Polarization Beam Splitter with Silicon Subwavelength-Grating Waveguides.

Chenlei Li,Ming Zhang,John E. Bowers,Daoxin Dai

DOI: https://doi.org/10.1364/ol.389207

IF: 3.6

2020-01-01

Optics Letters

Abstract:An ultra-broadband polarization beam splitter (PBS) with low excess loss (EL) and a high extinction ratio (ER) is proposed and demonstrated for the case with 340 nm thick silicon-on-insulator waveguides. Here the PBS is realized by using cascaded adiabatic dual-core tapers, which consist of a strip core and a subwavelength-grating core. For the designed PBS, which has a 33.6 µm long mode-evolution region, the ELs are ${ \lt }{0.3}\;{\rm dB}$<0.3dB, and the ERs are ${ \gt }{20}\;{\rm dB}$>20dB for both TE and TM polarizations in an ultra-broad bandwidth of ${ \gt }{270}\;{\rm nm}$>270nm (1400-1670 nm) in theory. For the fabricated PBS, the measured bandwidths for achieving ERs of ${\sim}{20}$∼20 and ${\sim}{25}\;{\rm dB}$∼25dB are 240 and 220 nm, while the 1 dB bandwidth is as large as 230 nm, which are the largest bandwidths reported to date, to the best of our knowledge.
A Compact and Novel Polarization Beam Splitter Based on Negative Refractive Photonic Crystal Slab

Zelin Xu,Yanping Li

DOI: https://doi.org/10.1117/12.905340

2011-01-01

Abstract:A compact polarization beam splitter (PBS) based on a silicon-based negative refractive photonic crystal slab is proposed and numerically demonstrated. The PBS has good performance that the crosstalk and extinction ratio are above 20dB over 80nm wavelength band.
Ultra-compact and Low-Loss Silicon Polarization Beam Splitter Using a Particle-Swarm-optimized Counter-Tapered Coupler.

Weiwei Chen,Bohao Zhang,Pengjun Wang,Shixun Dai,Wei Liang,Hongxiang Li,Qiang Fu,Jun Li,Yan Li,Tingge Dai,Hui Yu,Jianyi Yang

DOI: https://doi.org/10.1364/oe.408432

IF: 3.8

2020-01-01

Optics Express

Abstract:In this paper, an on-chip silicon polarization beam splitter using a particle-swarm-optimized counter-tapered directional coupler is proposed, designed, and fabricated. The coupling length of the proposed device is only 5 µm. As the waveguide width variation ΔW increases from -20 to 20 nm, the simulated polarization extinction ratio larger than 18.67 dB and the corresponding insertion loss lower than 0.17 dB are achieved. Measured experimental results achieved insertion loss <0.50 dB, TE polarization extinction between 16.68 to 31.87 dB, TM polarization extinction between 17.78 to 31.13 dB, over the wavelength range 1525 to 1600 nm.
Novel Silicon Polarization Beam Splitter at 2 Μm

Xinyu Liu,Daoxin Dai

DOI: https://doi.org/10.1364/acpc.2020.m4a.173

2020-01-01

Abstract:A silicon polarization-beam-splitter at 2 μm is realized by using a bent coupler assisted with a nano-slot waveguide, which has a high extinction ratio of >15dB and a low loss of <0.5dB over a broad band.
Polarization Beam Splitter on Lithium Niobate on Insulator Using a Silicon Nitride Assisted Waveguide

Daohan Ge,Mengcheng Lv,Jiakang Shi,Yujie Zhou,Guoxin Cui,Liqiang Zhang

DOI: https://doi.org/10.1117/1.oe.61.12.125102

IF: 1.3

2022-01-01

Optical Engineering

Abstract:A polarization beam splitter (PBS) is proposed based on an asymmetric directional coupler consisting of a silicon nitride assisted waveguide and two ridge waveguides on a lithium niobate on insulator. Due to the silicon nitride buffer layer, the phase-matching condition is satisfied for TE polarization, whereas TM polarization has a significant phase mismatch by choosing reasonable widths of three waveguides. A 112.2-mu m-long PBS is designed, and the gap width is chosen to be 300 nm to make it easy to fabricate. Numerical simulations show that the designed PBS has a broad bandwidth (> 80 nm) for an extinction ratio of > 15 dB and an ultralow insertion loss (< 0.35 dB). (c) 2022 Society of Photo-Optical Instrumentation Engineers (SPIE) [DOI: 10.1117/1.OE.61.12.125102]
Switchable Polarization Beam Splitter Based on GST-on-Silicon Waveguides

Bohao Zhang,Weiwei Chen,Pengjun Wang,Shixun Dai,Weifeng Jiang,Wei Liang,Hao Lu,Jian Ding,Jun Li,Yan Li,Qiang Fu,Tingge Dai,Hui Yu,Jianyi Yang

DOI: https://doi.org/10.1109/jphot.2020.2977979

IF: 2.4

2020-01-01

IEEE Photonics Journal

Abstract:A switchable polarization beam splitter utilizing GST-on-silicon waveguides is introduced and comprehensively investigated in this paper. Based on the phase matching and mode hybridization, structural parameters of the presented device are optimized by using the particle swarm optimization algorithm and finite difference time domain method, so that the output fundamental transverse-electric (TE0) and transverse-magnetic (TM0) modes can be switched by controlling the phase state of GST and the device exhibits broad bandwidth, low crosstalk, and high polarization extinction ratio. For the designed device with the amorphous GST, the crosstalk is lower than -23.40 dB and the polarization extinction ratio is larger than 21.35 dB over the C-band. In the case of the crystalline GST, within the C-band, the crosstalk of less than -27.37 dB and the polarization extinction ratio of greater than 21.37 dB are achieved.
Ultracompact polarization beam splitter based on hybrid plasmonic waveguide

Dongmei Zhou,Fajiao Zheng,Xiaosuo Wu,Jingrui Li,QinQin Jia

DOI: https://doi.org/10.1080/09500340.2024.2405973

IF: 1.3

2024-10-17

Journal of Modern Optics

Abstract:A compact polarization beam splitter (PBS) based on a three-waveguide plasmonic directional coupler was proposed and modeled. The directional coupler comprised two common silicon-on-insulator (SOI) ridge waveguides, with a metal-capped plasmonic SOI waveguide sandwiched between them. The geometrical structure of the three-waveguide directional coupled waveguide was optimized, realizing the phase matching of transverse magnetic (TM) modes but not of transverse electric (TE) modes. The structure and performance of the PBS was optimized using a finite-difference time-domain method. Simulation results showed that the birefringence comparison of TE and TM modes in a hybrid plasmonic waveguide was enhanced using a dielectric loading waveguide to obtain an ultra-compact structure; the final optimized coupling length of the device was 6.1 μm. At the center wavelength of 1.55 μm, the polarization extinction ratio of the TE and TM modes was 34.57 dB and 23.24 dB, and the insertion loss was 0.01 dB and 0.13 dB, respectively.

optics

Novel silicon Polarization Beam Splitter with a Horizontal Hybrid Nanoplasmonic Waveguide

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

High-extinction-ratio Silicon Polarization Beam Splitter with Tolerance to Waveguide Width and Coupling Length Variations.

A Compact Ultrabroadband Polarization Beam Splitter Utilizing a Hybrid Plasmonic Y-Branch

An Asymmetrical Sinx-Based Polarization Beam Splitter at 810 Nm

Polarization beam splitter based on a silicon nitride-silica-silicon horizontal slot waveguide

Particle Swarm Optimized Polarization Beam Splitter Using Metasurface-Assisted Silicon Nitride Y-junction for Mid-Infrared Wavelengths

Silicon Polarization Beam Splitter at the 2 Μm Wavelength Band by Using a Bent Directional Coupler Assisted with a Nano-Slot Waveguide.

Novel High-Performance Polarization Beam Splitter on Silicon

High-Performance Polarizing Beam Splitters Based on Cascaded Bent Directional Couplers

Ultracompact and broadband polarization beam splitter utilizing the evanescent coupling between a hybrid plasmonic waveguide and a silicon nanowire

Compact Polarization Splitter Based on Silicon Grating-Assisted Couplers

High Extinction-Ratio Compact Polarisation Beam Splitter on Silicon

Silicon Polarization Beam Splitter Based on an Asymmetrical Evanescent Coupling System with Three Optical Waveguides

Ultra-broadband Polarization Beam Splitter with Silicon Subwavelength-Grating Waveguides.

A Compact and Novel Polarization Beam Splitter Based on Negative Refractive Photonic Crystal Slab

Ultra-compact and Low-Loss Silicon Polarization Beam Splitter Using a Particle-Swarm-optimized Counter-Tapered Coupler.

Novel Silicon Polarization Beam Splitter at 2 Μm

Polarization Beam Splitter on Lithium Niobate on Insulator Using a Silicon Nitride Assisted Waveguide

Switchable Polarization Beam Splitter Based on GST-on-Silicon Waveguides

Ultracompact polarization beam splitter based on hybrid plasmonic waveguide