Abstract:Flashover on polluted insulators is the most common accident occuring in power system. A great amount of work has been done to study the flashover characteristics on various kinds of insulators with several theoretical models proposed. In these models, the amount and the distribution of the pollution on the insulator is critical to the flashover performance. However, very few simulation works has been carried out to study the pollution accumulation characteristics on the insulators. In this paper, both experimental and numerical efforts were given to study the pollution accumulation characteristics in order to evaluate the flashover probability. Experiments were performed first to have a bird view on the overall pollution distributions considering several crucial influential factors such as the wind speed and wind direction. AC porcelain insulators （XWP2-160 type） were selected as the experimental samples and the equiva lent salt deposit density （ESDD） was measured after the total predetermined amount of pollution was reached. Then, aerodynamic simulation was carried out to study the airflow and velocity distributions on each part of the insulator in clean air with regard to different wind speed and direction. It was found that the amount of the pollution on each see tion of the insulator has clear connections to the wind speed or air pressure distribution on the insulator surface. These distributions coincide to the pollution distribution obtained from experiments. Besides, the wind speed and air pressure distribution along the insulator chain was also studied. This work has shown that the numerical simulation may predict the pollution distribution on the insulators with practical accuracy. It is also possible to design new insulator shapes to reduce the pollution accumulation on critical areas according to the analysis in this work.

Theoretical Analysis on Pollution Flashover Voltage Prediction Based on Leakage Current of Porcelain Insulator in Service

A Study on Porcelain Insulator Flashover Voltage Evaluation System on Atmospheric Pollution Condition

Analysis On Flashover Performance Of Polluted Porcelain Insulators In High Conductivity Fog Environment

Research on the prediction method of porcelain insulator pollution degree based on electric field monitoring

Prediction of Pollution Flashover Voltage Based on Leakage Current under AC Operating Voltage

Influence of Pollution Manners on DC Pollution Flashover Characteristics of Porcelain Insulators

Prediction of Pollution Flashovervoltage Based on Multiple Characteristics of Leakage Current

Calculation and Analysis of Pollution Flashover Voltage of Porcelain Insulator in Transmission Line under Overheavy Pollution Environment

Influence of Organic Pollutants on the Pollution Flashover Properties of Porcelain Insulators

Research on Early Warning Method for Pollution Flashover Based on Phase Angle of Insulator Leakage Current

Research on Leakage Current Waveform Spectrum Characteristics of Artificial Pollution Porcelain Insulator

Development of Contamination Flashover Pre-Warning System and Analysis of Operating Experience

Analysis of the leakage current on polluted insulators using correlation coefficient

Present Status and Future Prospects for Flashover Research of Contaminated Insulators

Method of Flashover Risk Prediction for Contaminated Insulator Based on Leakage Current

Analysis of characteristic of natural pollution test and artificial simulation method

Influence of Temperature Difference on Wetting Characteristics of Insulators

Research on the Relationship Between Leakage Current of On-Site Insulators and Environmental Factors

Experimental research on pollution flashover voltage and leakage current characteristics of naturally polluted insulators

Experimental and Numerical Study of the Pollution Accumulation on Outdoor Insulators

Experimental Verification on the Assessment System of Outdoor Insulation State of Saturated Moist Insulator