Abstract:In buildings with good-quality thermal insulation of external partitions, the main component of the building's heat balance is the heat demand for ventilation. The reduction of this energy demand cannot be achieved at the expense of thermal comfort of the occupants and indoor air quality. The aim of this article is to analyze the impact of various ventilation strategy (natural and mechanical) on heating demand, thermal comfort, and CO2 concentration in a single-family house located in Poland. The benefits of using fans integrated with the earth tube were tested. The study was based on the numerical energy simulation of a multi-zone building model for the entire calendar year. Contam, EnergyPlus, and Python programs were used to perform calculations. The thermal model was validated on the results of temperature measurements in the building. To obtain the best solutions, the parameters of the systems considered have been optimized with the use of genetic algorithms. Various optimal parameters of the earth tube (diameter, length, and foundation depth) were obtained during this research. The highest number of thermal discomfort hours was obtained in the naturally ventilated building with automatic window opening. This system supplied to the rooms a large amount of cool outdoor air in winter and warm air in summer, causing instantaneous rapid fluctuations in indoor temperature. Supplementing the mechanical ventilation control system with CO2 concentration sensors resulted in a much higher amount of ventilation air supplied to the rooms compared to systems controlled only by temperature sensors, resulting in an increase in heat demand.

OUTLINE OF VENTILATION TEST HOUSE, AND FUNDAMENTAL STUDY BY EXPERIMENT AND NUMERICAL ANALYSIS : Study on the Performance Evaluation of Hybrid Ventilation System for a Detached House Part1

FIELD MEASUREMENT OF NATURAL VENTILATION SYSTEM DESIGNED IN HOSPITAL BUILDING WITH VOID(Environmental Engineering)

Performance Analysis of the Demand-Based Ventilation in a Nordic Apartment Building

Building Design Utilizing Natural Ventilation Based on CFD and Ventilation Network Analysis and Its Performance Evaluation by Field Measurement

Experimental Evaluation of Ventilation Systems in a Single-Family Dwelling

Examination and Optimization of Classroom Indoor Environments in China’s Hot Summer and Cold Winter Regions

Experimental study on the performance of hybrid buoyancy-driven natural ventilation with a mechanical exhaust system in an industrial building

Design of Ventilation Systems in a Single-Family House in Terms of Heating Demand and Indoor Environment Quality

Hybrid Ventilation for Multi-Zone Buildings - Development of Optimal Control Strategies through Experiments and Dynamic Modelling

An analysis of the ventilation rates in residential buildings

Optimization Analysis of Natural Ventilation in University Laboratories Based on CFD Simulation

VENTILATION SYSTEM FOR A MULTI LEVEL UNDERGROUND PARKING SPACE

Experimental and CFD study of ventilation performance enhanced by roof window and mechanical ventilation system with different design strategies

ANALYSES OF VENTILATION INDICES OF VF AND PFR FOR DRY AREA WITHOUT ABOVE-GROUND BUILDING BASED ON TURBULENCE SIMULATION : Fundamental Study on Ventilation Performance of Dry Area for Basement Room Part 1

Simulation of Indoor Pollutant Distribution in Residential Buildings under Different Ventilation Modes

Numerical Simulation of the Influence of the New Air Volume of Fresh Air Exchanger on the Indoor Flow Field of the Residence

Improving Wind Environment of Residential Neighborhoods by Understanding the Relationship Between Building Layouts and Ventilation Efficiency

Analyzing the effects of passive design strategies on building ventilation performance and thermal comfort using simulation-based approach

Implementation of Demand-Oriented Ventilation with Adjustable Fan Network

Numerical Study On Indoor Air Distribution For Vav System