Compartmentalization and ventilation system impacts on air and contaminant transport for multifamily buildings
Iain S. WalkerBrennan D. LessCara H. LozinskyDavid LorenzettiNuria Casquero-ModregoMichael D. Sohna Building Technology and Urban Systems Division,Lawrence Berkeley National Laboratory,Berkeley,CA,USAb Department of Civil and Mineral Engineering,University of Toronto,Toronto,ON,Canadac Energy Analysis and Environmental Impacts Division,Lawrence Berkeley National Laboratory,Berkeley,CA,USAIain S. Walker,Mechanical Staff Scientist/Engineer and Leader of the Residential Building Systems Group at Lawrence Berkeley National Laboratory. His current work focuses on residential ventilation and home decarbonization.Brennan D. Less,Technology Researcher at Lawrence Berkeley National Laboratory. Research interests include state-of-the-art field measurements and simulations of smart ventilation systems,hygrothermal performance of sealed and insulated attics,indoor air quality,deep energy retrofits,zero net energy homes,and the health-energy efficiency nexusCara H. Lozinsky,PhD graduate from the University of Toronto and current Post-Doctoral Researcher at Lawrence Berkeley National Laboratory. Her research interests include building airtightness,mechanical ventilation system efficiency,and indoor air quality in residential buildings.David Lorenzetti,Staff Software Developer at Lawrence Berkeley National Laboratory. His work focuses on methods for solving whole-building airflow and pollutant transport problems,and applications of building airflow models to issues of life-safety in buildings.Nuria Casquero-Modrego,Post-Doctoral Researcher at Lawrence Berkeley National Laboratory. Her research focuses on the energy and health impacts of residential decarbonization.Michael D. Sohn,Mechanical Staff Scientist/Engineer at Lawrence Berkeley National Laboratory. His contributions were in the contaminant transport modeling sections of this paper.
DOI: https://doi.org/10.1080/14733315.2024.2333669
2024-04-13
International Journal of Ventilation
Abstract:Provision of acceptable indoor air quality in multifamily buildings (MFBs) depends on the interior air flows that impact dilution of contaminants, cross-contamination between units and building energy use. The airtightness of interior partitions and design of ventilation systems in MFBs determine the flows across building partitions. These flows change the total ventilation rate for the building and individual units, and impact the mixing of air and contaminants between apartment units or with common spaces. This study examines the changes in air flow and contaminant transport in MFBs using combined CONTAM/EnergyPlus models. Key parameters were systematically varied, including climate, apartment airtightness, and mechanical ventilation system type. Simulations were performed for mid-rise buildings with and without an enclosed common corridor, and a 20-story high-rise building. Contaminants simulated in the analysis were PM 2.5 , formaldehyde, water vapor, and CO 2 . Key results of this work are that current airtightness requirements in ASHRAE 62.2 sufficiently limit transport of key contaminants, independent of the type of ventilation system across all three building typologies, and significantly reduce energy use in colder climates. The results of this work are intended to assist codes and standards bodies in setting appropriate airtightness limits and ventilation system design guidelines for MFBs.
energy & fuels,construction & building technology