A 3d Porous Interconnected Navpo4f/C Network: Preparation and Performance for Na-Ion Batteries

Maowen Xu,Chuan-Jun Cheng,Qiang-Qiang Sun,Shu-Juan Bao,Yu-Bin Niu,Hong He,Yutao Li,Jie Song

DOI: https://doi.org/10.1039/c5ra05161d

2015-01-01

Abstract:Correction for ‘A 3D porous interconnected NaVPO4F/C network: preparation and performance for Na-ion batteries’ by Maowen Xu et al., RSC Adv., 2015, 5, 40065–40069.

What problem does this paper attempt to address?

3D Interconnected and Multiwalled Carbon@MoS 2 @Carbon Hollow Nanocables as Outstanding Anodes for Na-Ion Batteries.

Yan Wang,Qunting Qu,Guangchao Li,Tian Gao,Feng Qian,Jie Shao,Weijie Liu,Qiang Shi,Honghe Zheng

DOI: https://doi.org/10.1002/smll.201602268

IF: 13.3

2016-01-01

Small

Abstract:Currently, the specific capacity and cycling performance of various MoS2/carbon-based anode materials for Na-ion storage are far from satisfactory due to the insufficient structural stability of the electrode, incomplete protection of MoS2 by carbon, difficult access of electrolyte to the electrode interior, as well as inactivity of the adopted carbon matrix. To address these issues, this work presents the rational design and synthesis of 3D interconnected and hollow nanocables composed of multiwalled carbon@MoS2@carbon. In this architecture, (i) the 3D nanoweb-like structure brings about excellent mechanical property of the electrode, (ii) the ultrathin MoS2 nanosheets are sandwiched between and doubly protected by two layers of porous carbon, (iii) the hollow structure of the primary nanofibers facilitates the access of electrolyte to the electrode interior, (iv) the porous and nitrogen-doping properties of the two carbon materials lead to synergistic Na-storage of carbon and MoS2. As a result, this hybrid material as the anode material of Na-ion battery exhibits fast chargetransfer reaction, high utilization efficiency, and ultrastability. Outstanding reversible capacity (1045 mAh g(-1)), excellent rate behavior (817 mAh g(-1) at 7000 mA g(-1)), and good cycling performance (747 mAh g(-1) after 200 cycles at 700 mA g(-1)) are obtained.
Design and Construction of 3D Porous Na3V2(PO4)3/C as High Performance Cathode for Sodium Ion Batteries

Baoxiu Hou,Linlin Ma,Xiaohuan Zang,Ningzhao Shang,Jianmin Song,Xiaoxian Zhao,Chun Wang,Jian Qi,Jiangyan Wang,Ranbo Yu

DOI: https://doi.org/10.1007/s40242-021-0433-y

IF: 3.1

2021-01-30

Chemical Research in Chinese Universities

Abstract:An easy and delicate approach using cheap carbon source as conductive materials to construct 3D sequential porous structural Na3V2(PO4)3/C(NVP/C) with high performance for cathode materials of sodium ion battery is highly desired. In this paper, the NVP/C with 3D sequential porous structure is constructed by a delicate approach named as "cooking porridge" including evaporation and calcination stages. Especially, during evaporation, the viscosity of NVP/C precursor is optimized by controlling the adding quantity of citric acid, thus leading to a 3D sequential porous structure with a high specific surface area. Furthermore, the NVP/C with a 3D sequential porous structure enables the electrolyte to interior easily, providing more active sites for redox reaction and shortening the diffusion path of electron and sodium ion. Therefore, benefited from its unique structure, as cathode material of sodium ion batteries, the 3D sequential porous structural NVP/C exhibits high specific capacities(115.7, 88.9 and 74.4 mA·h/g at current rates of 1, 20 and 50 C, respectively) and excellent cycling stability (107.5 and 80.4 mA·h/g are remained at a current density of 1 C after 500 cycles and at a current density of 20 C after 2200 cycles, respectively).
Three-Dimensional Interconnected Vanadium Pentoxide Nanonetwork Cathode for High-Rate Long-Life Lithium Batteries.

Qinyou An,Qiulong Wei,Pengfei Zhang,Jinzhi Sheng,Kalele Mulonda Hercule,Fan Lv,Qinqin Wang,Xiujuan Wei,Liqiang Mai

DOI: https://doi.org/10.1002/smll.201403358

IF: 13.3

2015-01-01

Small

Abstract:Three-dimensional interconnected vanadium pentoxide nanonetworks as cathodes for rechargable lithium batteries are successfully synthesized via a quick gelation followed by annealing. The interconnected structure ensures the electron transport of each unit. And their inner porous structure buffer the volume change over long-term repeated lithium ion insertion/extraction cycles, leading to the high-rate long-life cycling performance.
Achieving High-Performance Na 3 V 2 (PO 4 ) 2 F 3 Cathode Material through a Bifunctional N-Doped Carbon Network

Chang Sun,Lu-Lu Zhang,Ze-Rong Deng,Hua-Bin Sun,Xue-Lin Yang

DOI: https://doi.org/10.1021/acsami.4c06830

IF: 9.5

2024-06-26

ACS Applied Materials & Interfaces

Abstract:Na(3)V(2)(PO(4))(2)F(3) (NVPF) is emerging as a popular cathode for sodium-ion batteries owing to its stable structure, high operating voltage, and large energy density. However, its practical application is hindered by its low conductivity. In addition, due to the loss of fluorine during synthesis, Na(3)V(2)(PO(4))(3) (NVP) impurity is often easily generated, resulting in a decrease in actual operating voltage. Herein, a bifunctional carbon network composed of an N-doped carbon layer and carbon...

materials science, multidisciplinary,nanoscience & nanotechnology
An Advanced Sodium‐Ion Battery Composed of Carbon Coated Na3V2(PO4)3 in a Porous Graphene Network

Xianhong Rui,Wenping Sun,Chao Wu,Yan Yu,Qingyu Yan

DOI: https://doi.org/10.1002/adma.201502864

IF: 29.4

2015-01-01

Advanced Materials

Abstract:A 3D hierarchical meso- and macroporous Na3V2(PO4)3-based hybrid cathode with connected Na ion/electron pathways is developed for ultra-fast charge and discharge sodium-ion batteries. It delivers an excellent rate capability (e.g., 86 mA h g(-1) at 100 C) and outstanding cycling stability (e.g., 64% retention after 10,000 cycles at 100 C), indicating its superiority in practical applications.
A Novel NASICON‐Typed Na 4 VMn 0.5 Fe 0.5 (PO 4 ) 3 Cathode for High‐Performance Na‐Ion Batteries

Chunliu Xu,Junmei Zhao,Enhui Wang,Xiaohong Liu,Xing Shen,Xiaohui Rong,Qiong Zheng,Guoxin Ren,Nian Zhang,Xiaosong Liu,Xiaodong Guo,Chao Yang,Huizhou Liu,Benhe Zhong,Yong‐Sheng Hu

DOI: https://doi.org/10.1002/aenm.202100729

IF: 27.8

2021-04-24

Advanced Energy Materials

Abstract:The Na+ superionic conductor (NASICON)‐type Na3V2(PO4)3 cathodes have attracted extensive interest due to their high structural stability and fast Na+ mobility. However, the substitution of vanadium with low‐cost active elements remains imperative due to high cost of vanadium, to further boost its application feasibility. Herein, a novel ternary NASICON‐type Na4VMn0.5Fe0.5(PO4)3/C cathode is designed, which integrates the advantages of large reversible capacity, high voltage, and good stability. The as‐obtained Na4VMn0.5Fe0.5(PO4)3/C composite can deliver an excellent rate capacity of 96 m Ah g‐1 at 20 C and decent cycling durability of 94% after 3000 cycles at 20 C, which is superior to that of Na4VFe(PO4)3/C and Na4VMn(PO4)3/C. The synergetic contributions of multimetal ions and facilitated Na+ migration of the Na4VMn0.5Fe0.5(PO4)3/C cathode are confirmed by the first‐principles calculations. The processive reduction/oxidation involved in Fe2+/Fe3+, Mn2+/Mn3+, V3+/V4+/V5+ redox couples are also revealed upon the charging/discharging process by ex situ soft X‐ray absorption spectroscopy. The reversible structure evolution and small volume change during the electrochemical reaction is demonstrated by in situ X‐ray diffraction characterization. The rational design of NASICON‐type cathodes by regulating composition with substitution of multimetal ions can provide new perspectives for high‐performance Na‐ion batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Nanofiber networks of Na3V2(PO4)3 as a cathode material for high performance all-solid-state sodium-ion batteries

Gao Rongtan,Tan Rui,Han Lei,Zhao Yan,Wang Zijian,Yang Luyi,Pan Feng

DOI: https://doi.org/10.1039/c7ta00314e

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:Herein, we fabricated a novel all-solid-state sodium-ion battery (SIB) using Na3V2(PO4)(3) with a nanofiber network structure as the cathode material and a PEO solid polymer electrolyte (SPE) membrane, demonstrating a high reversible capacity and good cycling stability at high rates. Our study shows that the nanofibermorphology of cathode materials has significantly improved the battery's performance, especially with a high loading of cathode materials. Therefore, a promising route to improve all-solid-state batteries' rate performance is proposed.
Hydrogel Self-Templated Synthesis of Na3V2(PO4)3@C@CNT Porous Network As Ultrastable Cathode for Sodium-Ion Batteries

Yan,Zhongyuan Ma,Huijuan Lin,Kun Rui,Qiao Zhang,Qingqing Wang,Min Du,Desheng Li,Yao Zhang,Jixin Zhu,Wei Huang

DOI: https://doi.org/10.1016/j.coco.2019.03.006

IF: 8

2019-01-01

Composites Communications

Abstract:A hydrogel self-templated method was developed to produce Na3V2(PO4)3@C@CNT 2D porous network (denoted as NVP@C@CNT) comprising 0D carbon coated Na3V2(PO4)3 nanoparticles and 1D carbon nanotubes. Such fascinating architecture offers high electronic and ionic conductivity, structure stability, as well as long-term cycling when used as a cathode for sodium-ion batteries (SIBs). The cathode displays an ultralong cyclability (94% capacity retention after 4500 cycles at 5C) and high rate capability. Such performance derives from the synergistic effect of porous network structure and carbon coating, which accelerates ion diffusion and improves structural integrity. Equally important, the proposed method provides a new avenue for the preparation of 2D porous materials for advanced energy storage applications.
Pore-forming mechanisms and sodium-ion-storage performances in a porous Na3V2(PO4)3/C composite cathode

Zhaoyang Wang,Jiahuai Han,Dong Wang,Lingyang Liu,Wen-Jing Shi,Fangyu Xiong,Haizheng Tao

DOI: https://doi.org/10.1039/d3dt00365e

IF: 4

2023-01-01

Dalton Transactions

Abstract:The formation mechanisms of different pore structures of NVP and the origin of the electrochemical properties of NVP are revealed.
Porous Na3V2(PO4)3@C nanoparticles enwrapped in three-dimensional graphene for high performance sodium-ion batteries

junqi fang,suqing wang,zhitong li,hongbin chen,lu xia,liangxin ding,haihui wang

DOI: https://doi.org/10.1039/c5ta08869k

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:Porous Na3V2(PO4)(3)@ C nanocomposites enwrapped in a 3D graphene network were prepared using a simple freeze-drying-assisted thermal treatment method. The carbon layer and 3D graphene network provide not only a 3D conductive network but also a double restriction on the aggregation of Na3V2(PO4)(3) particles that have a high crystallinity under high temperature treatment. Due to the high electrochemical activity of the highly crystalline Na3V2(PO4)(3) nanoparticles and 3D conductive network, the novel NVP@C/Gmaterial displays a superior rate capability (76 mA h g(-1) at 60C) and ultra-long cyclability (82% capacity retention for 1500 cycles at 40C) when used in sodium-ion batteries.
Spatially Confined in Situ Formed Sodiophilic-Conductive Network for High-Performance Sodium Metal Batteries

Xuan Lu,Ruochen Chen,Shenyu Shen,Yuyang Li,Hongyang Zhao,Hongkang Wang,Tiantian Wu,Yaqiong Su,Jianmin Luo,Xiaofei Hu,Shujiang Ding,Weiyang Li

DOI: https://doi.org/10.1021/acs.nanolett.4c00562

IF: 10.8

2024-04-26

Nano Letters

Abstract:The sodium (Na) metal anode encounters issues such as volume expansion and dendrite growth during cycling. Herein, a novel three-dimensional flexible composite Na metal anode was constructed through the conversion-alloying reaction between Na and ultrafine Sb(2)S(3) nanoparticles encapsulated within the electrospun carbon nanofibers (Sb(2)S(3)@CNFs). The formed sodiophilic Na(3)Sb sites and the high Na^(+)-conducting Na(2)S matrix, coupled with CNFs, establish a spatially confined...

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Scalable synthesis of Na3V2(PO4)3/C porous hollow spheres for Na-ion batteries cathode

Chao Luo,Tao Gao,Xiulin Fan,Chunsheng Wang

2015-01-01

Abstract:Please note that technical editing may introduce minor changes to the text and/or graphics, which may alter content. The journal’s standard Terms & Conditions and the Ethical guidelines still apply. In no event shall the Royal Society of Chemistry be held responsible for any errors or omissions in this Accepted Manuscript or any consequences arising from the use of any information it contains. Accepted Manuscript Journal of Materials Chemistry A
Biomineralization-inspired synthesis of Na3V2(PO4)3 nanoparticles wrapped with 3D porous carbon as high-performance cathode for sodium-ion batteries

Zhongxun An,Yanmei Gong,Wenying Fang,Kangning Zhao,Daixin Ye,Hongbin Zhao,Jiaqiang Xu,Lei Zhang,Jiujun Zhang

DOI: https://doi.org/10.1007/s11581-020-03871-4

IF: 2.961

2021-01-07

Ionics

Abstract:Inspired by biomineralization, we develop a facile synthesis route to obtain 3D porous foam-like Na3V2(PO4)3@C composites consisting of ultra-small Na3V2(PO4)3 particles in situ wrapped with carbon architecture derived from yeast as storing sodium cathode. 3D carbon architecture with high electrical conductivity is endowed with important effect on bio-restricting the aggregation of Na3V2(PO4)3 nanoparticles, improving Na+ diffusion coefficient. As a result, the Na3V2(PO4)3@C cathode shows good rate performance with 109 mAh g−1 and 44 mAh g−1 at 0.5 C and 20 C, respectively. Besides, the storage mechanism and structure evolution of Na3V2(PO4)3@C have been certified by ex situ XRD and electrochemical impedance spectroscopy. The unique biomineralization process enables to improve the electrochemical performances of Na3V2(PO4)3 by a facile self-organized process in a friendly environment. Therefore, biomineralization is a promising way to prepare high-performance cathode material with mesoporous structure for batteries.

chemistry, physical,physics, condensed matter,electrochemistry
Advanced NASICON-Type Na 4 Fe 3 (PO 4 ) 2 (P 2 O 7 ) Cathode for High-Performance Na + /Li + Batteries

Jinqiang Gao,Yu Mei,Lianshan Ni,Haoji Wang,Bai Song,Wentao Deng,Guoqiang Zou,Hongshuai Hou,Xiaobo Ji

DOI: https://doi.org/10.1021/acs.inorgchem.3c00948

IF: 4.6

2023-05-26

Inorganic Chemistry

Abstract:Na(4)Fe(3)(PO(4))(2)(P(2)O(7)) (NFPP) is an attractive candidate for Na^(+) batteries (SIBs) and Li^(+) batteries (LIBs). However, the real implementation of NFPP has been critically restrained by the inferior intrinsic electronic conductivity. Herein, in situ carbon-coated mesoporous NFPP, obtained via freeze drying and heat treatment, demonstrates highly reversible insertion/extraction of Na^(+)/Li^(+). Mechanically, the electronic transmission and structural stabilities of NFPP are...

chemistry, inorganic & nuclear
Unveiling Zn substitution and carbon nanotubes enwrapping in Na3V2(PO4)3 with high performance for sodium ion batteries: Experimental and theoretical study

Tianyue Tong,Zeyi Tian,Weiliang Chen,Yaoyao Linghu,Dan Li,Zhen Tian,Yanzhong Wang,Yanjun Chen,Li Guo

DOI: https://doi.org/10.1016/j.electacta.2022.140073

IF: 6.6

2022-04-01

Electrochimica Acta

Abstract:NASICON-type Na3V2(PO4)3 (NVP) is regarded as a prospective cathode material for sodium-ion batteries (SIBs). However, its electrochemical performance is restricted by poor intrinsic conductivity. Herein, we prepare Na3V2(PO4)3 with Zn2+ ions doping via sol-gel method and enwrap it by carbon nanotubes (CNTs), in which CNTs act as conductive regent. The combined effects of CNTs and Zn2+ ions, especially for Na3.07V1.93Zn0.07(PO4)3@CNTs composite, greatly improving the kinetic performance of pristine NVP. Specifically, Na3.07V1.93Zn0.07(PO4)3@CNTs composite possesses an initial capacity of 114.9 mAh g−1, close to the theoretical value (117.6 mAh g−1). Moreover, the composite exhibits a discharge capacity of 86.9 mAh g−1 at 15 C after 500 cycles with the retention rate of approximately 90.7%, demonstrating its high cyclic stability in long-cycling tests. Our theoretical results demonstrate that both the band gap and migration energy barrier can be reduced by Zn2+ substitution, which explains the improved electrical conductivity and ion diffusion rate. Overall, this design principle provides a promising method for fabricating Na3V2(PO4)3 material as high-performance sodium-ion batteries.

electrochemistry
Monodisperse Porous Alluaudite NaFePO4 Nanocomposites for Sodium Ion Battery

Weifeng Huang,Jing Zhou,Biao Li,Li An,Peixin Cui,Wei Xia,Dingguo Xia,Wangsheng Chu,Ziyu Wu

DOI: https://doi.org/10.1149/ma2014-04/2/378

2014-01-01

ECS Meeting Abstracts

Abstract:Looking for a new promising cathode material of sodium ion batteries (SIBs) is a challenge for large energy storage systems. Here we present a study of a novel alluaudite NaFePO4 and NaFePO4/CNT nano-composites for SIBs application. The new monodisperse porous NaFePO4 microspheres and their nano-composites consist of nanorods with an open three-dimensional framework. First principles calculations identify two fast one-dimensional paths for Na+ insertion and extraction. Moreover, the electrochemical characterization demonstrates that up to 0.9 Na+ can be intercalated/deintercalated reversibly even for 50 cycles using this novel NaFePO4/CNT nano-composite.
Three-dimensional porous Na4MnV(PO4)3 constructed by Aspergillus niger biological template as a high performance cathode for sodium ion batteries

Jiepeng Chen,Yun Huang,Jiapin liu,Chengwei Li,He Zheng,Xi Xu,Lei Fu,Xing Li,Mingshan Wang,Yuanhua Lin,Haijun Cao

DOI: https://doi.org/10.1016/j.electacta.2023.142521

IF: 6.6

2023-08-01

Electrochimica Acta

Abstract:The sodium super ion conductor (NASICON) structure materials have attracted extensive attention because of its open three-dimensional crystal network framework and fast sodium ion migration rate. However, the poor electronic conductivity due to the presence of phosphate groups and the consequent high cost have been a barrier to commercialization. In this work, Na4MnV(PO4)3 (NMVP) with three-dimensional porous structure is synthesized in situ using Aspergillus niger as a biological template (noted as NMVP/ANDC). The cell wall of Aspergillus niger is rich in hydroxyl groups, which can adsorb metal ions well, so that NMVP particles can be synthesized on Aspergillus niger without stacking and agglomeration. NMVP grows along Aspergillus niger mycelium has a spongy-like three-dimensional porous network structure, which helps the contact between active materials and electrolyte, reduces the migration distance of sodium ions, and improves the conductivity of active materials. Therefore, NMVP/ANDC has good rate performance and cycle stability. It can provide 109 mAh g −1 at 0.5 C and 79.6% capacity retention after 3000 cycles at 5 C. The biological template method is proposed in this paper opens up a simple way for the preparation of other three-dimensional porous network structural materials.

electrochemistry
Superior conductivity and accelerated kinetics Na3V2(PO4)2F3@CNTs with high performance for sodium-ion batteries

Haitao Tong,Haowei Han,Guangying Zhang,Kefu Gao,Qingyu Dong,Fangdong Hu,Xiaolei Jiang

DOI: https://doi.org/10.1007/s11581-022-04511-9

IF: 2.961

2022-03-18

Ionics

Abstract:Na3V2(PO4)2F3 with a high theoretical energy density, robust 3D structure, and superior thermal stability has become one of the popular cathode materials for sodium ion batteries. Currently, its poor intrinsic electronic conductivity leads to unsatisfactory rate performance, which is still the bottleneck for commercializing sodium-ion batteries. In this work, carbon nanotube–intertwined Na3V2(PO4)2F3 nanospheres (notated as NVPF@CNTs) are successfully synthesized by a solvothermal method and subsequent heat treatment. In NVPF@CNTs composites, the carbon nanotubes constituted a continuous conductive 3D carbon network, realizing the improvement of electrical conductivity. The NVPF nanospheres are exposed to the electrolyte to increase the contact area with the electrolyte and greatly shorten the diffusion distance of Na+. The unique architecture endorses superior electrochemical performance and good reaction kinetics. Thus, the NVPF@CNTs as cathode exhibits good cycling performance (117.6 mAh g−1 at 0.2 C after 300 cycles) and rate capability (73.4 mAh g−1 at 5 C with a high capacity retention ratio of 91.6% after 600 cycles). The excellent electrochemical performance for NVPF@CNTs opens up a new way to achieve high performance of sodium-ion batteries.

chemistry, physical,physics, condensed matter,electrochemistry
Sol–gel design strategy for embedded Na3V2(PO4)3 particles into carbon matrices for high-performance sodium-ion batteries

shi tao,peixin cui,weifeng huang,z yu,xingbo wang,shenghui wei,daobin liu,li song,wangsheng chu

DOI: https://doi.org/10.1016/j.carbon.2015.10.054

IF: 10.9

2016-01-01

Carbon

Abstract:NASICON-type Na3V2(PO4)(3)(NVP) is one of the most promising cathode materials for sodium-ion batteries (SIBs). Here, we report a simple sol gel method to prepare NVP@C porous microspheres network for high performance SIBs, which can realize NVP nanoparticles successfully embedding into acetylene carbon (SP) and multiple walled carbon nanotubes (MCNTs) matrices. The electrochemical characterizations demonstrate that both NVP/SP and NVP/MCNTs show excellent cell performance with high rate ability and stable reversibility, especially for the NVP/MCNTs sample. In particular, as high as 112.8 mAh/g and 70 mAh/g of the discharge capacity for NVP/MCNTs system can be delivered at 0.2C and 10C, respectively. Furthermore, a good capacity retention of 90% can be maintained after 400 cycles at 1C rate. Moreover, the enhanced electrode performance is ascribed to the contribution from both of the porous microspheres morphology and functional carbon matrices, which can favor the migration of both electrons and ions. (C) 2015 Elsevier Ltd. All rights reserved.
The recent advances of NASICON-Na3V2(PO4)3 cathode materials for sodium-ion batteries

Yuanqiang Zhu,Hui Xu,Ji Ma,Pengdong Chen,Yong Chen

DOI: https://doi.org/10.1016/j.jssc.2022.123669

IF: 3.3

2023-01-01

Journal of Solid State Chemistry

Abstract:NASICON (super ionic conductor)-type Na3V2(PO4)3 (NVP) has been widely studied as a very promising cathode material for sodium-ion batteries (SIBs) due to its high theoretical specific capacity, high voltage platform, good chemical stability, its unique three-dimensional (3D) open crystal structure, and the de/intercalation of sodium ions during charge/discharge. However, the high Na+ diffusion ability of NVP is accompanied by the large bulk structure and poor electronic conductivity, which leads to poor electrochemical performance in terms of rate capability and cycling stability and thus impedes its practical application. Herein, the research development of NVP sodium ion cathode materials are reviewed in recent years. Based on the crystal structure and ion migration mechanism of NVP materials, the sodium storage mechanism and theoretical capacitance of NVP materials are introduced, and the effects of different preparation methods on the electrochemical properties of NVP materials are summarized and compared. The modification research strategies to improve the electrochemical performance of NVP electrode materials are mainly discussed, including carbon material modification, ion doping, and material Nano-crystallization. Finally, some remarks are made on the challenges and prospects for the future development of NVP cathodes.

chemistry, physical, inorganic & nuclear

A 3d Porous Interconnected Navpo4f/C Network: Preparation and Performance for Na-Ion Batteries

3D Interconnected and Multiwalled Carbon@MoS 2 @Carbon Hollow Nanocables as Outstanding Anodes for Na-Ion Batteries.

Design and Construction of 3D Porous Na3V2(PO4)3/C as High Performance Cathode for Sodium Ion Batteries

Three-Dimensional Interconnected Vanadium Pentoxide Nanonetwork Cathode for High-Rate Long-Life Lithium Batteries.

Achieving High-Performance Na 3 V 2 (PO 4 ) 2 F 3 Cathode Material through a Bifunctional N-Doped Carbon Network

An Advanced Sodium‐Ion Battery Composed of Carbon Coated Na3V2(PO4)3 in a Porous Graphene Network

A Novel NASICON‐Typed Na 4 VMn 0.5 Fe 0.5 (PO 4 ) 3 Cathode for High‐Performance Na‐Ion Batteries

Nanofiber networks of Na3V2(PO4)3 as a cathode material for high performance all-solid-state sodium-ion batteries

Hydrogel Self-Templated Synthesis of Na3V2(PO4)3@C@CNT Porous Network As Ultrastable Cathode for Sodium-Ion Batteries

Pore-forming mechanisms and sodium-ion-storage performances in a porous Na<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub>/C composite cathode

Porous Na3V2(PO4)3@C nanoparticles enwrapped in three-dimensional graphene for high performance sodium-ion batteries

Spatially Confined in Situ Formed Sodiophilic-Conductive Network for High-Performance Sodium Metal Batteries

Scalable synthesis of Na3V2(PO4)3/C porous hollow spheres for Na-ion batteries cathode

Biomineralization-inspired synthesis of Na3V2(PO4)3 nanoparticles wrapped with 3D porous carbon as high-performance cathode for sodium-ion batteries

Advanced NASICON-Type Na 4 Fe 3 (PO 4 ) 2 (P 2 O 7 ) Cathode for High-Performance Na + /Li + Batteries

Unveiling Zn substitution and carbon nanotubes enwrapping in Na3V2(PO4)3 with high performance for sodium ion batteries: Experimental and theoretical study

Monodisperse Porous Alluaudite NaFePO4 Nanocomposites for Sodium Ion Battery

Three-dimensional porous Na4MnV(PO4)3 constructed by Aspergillus niger biological template as a high performance cathode for sodium ion batteries

Superior conductivity and accelerated kinetics Na3V2(PO4)2F3@CNTs with high performance for sodium-ion batteries

Sol–gel design strategy for embedded Na3V2(PO4)3 particles into carbon matrices for high-performance sodium-ion batteries

The recent advances of NASICON-Na3V2(PO4)3 cathode materials for sodium-ion batteries