A Novel NASICON‐Typed Na 4 VMn 0.5 Fe 0.5 (PO 4 ) 3 Cathode for High‐Performance Na‐Ion Batteries

Chunliu Xu,Junmei Zhao,Enhui Wang,Xiaohong Liu,Xing Shen,Xiaohui Rong,Qiong Zheng,Guoxin Ren,Nian Zhang,Xiaosong Liu,Xiaodong Guo,Chao Yang,Huizhou Liu,Benhe Zhong,Yong‐Sheng Hu
DOI: https://doi.org/10.1002/aenm.202100729
IF: 27.8
2021-04-24
Advanced Energy Materials
Abstract:<p>The Na<sup>+</sup> superionic conductor (NASICON)‐type Na<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub> cathodes have attracted extensive interest due to their high structural stability and fast Na<sup>+</sup> mobility. However, the substitution of vanadium with low‐cost active elements remains imperative due to high cost of vanadium, to further boost its application feasibility. Herein, a novel ternary NASICON‐type Na<sub>4</sub>VMn<sub>0.5</sub>Fe<sub>0.5</sub>(PO<sub>4</sub>)<sub>3</sub>/C cathode is designed, which integrates the advantages of large reversible capacity, high voltage, and good stability. The as‐obtained Na<sub>4</sub>VMn<sub>0.5</sub>Fe<sub>0.5</sub>(PO<sub>4</sub>)<sub>3</sub>/C composite can deliver an excellent rate capacity of 96 m Ah g<sup>‐1</sup> at 20 C and decent cycling durability of 94% after 3000 cycles at 20 C, which is superior to that of Na<sub>4</sub>VFe(PO<sub>4</sub>)<sub>3</sub>/C and Na<sub>4</sub>VMn(PO<sub>4</sub>)<sub>3</sub>/C. The synergetic contributions of multimetal ions and facilitated Na<sup>+</sup> migration of the Na<sub>4</sub>VMn<sub>0.5</sub>Fe<sub>0.5</sub>(PO<sub>4</sub>)<sub>3</sub>/C cathode are confirmed by the first‐principles calculations. The processive reduction/oxidation involved in Fe<sup>2+</sup>/Fe<sup>3+</sup>, Mn<sup>2+</sup>/Mn<sup>3+</sup>, V<sup>3+</sup>/V<sup>4+</sup>/V<sup>5+</sup> redox couples are also revealed upon the charging/discharging process by ex situ soft X‐ray absorption spectroscopy. The reversible structure evolution and small volume change during the electrochemical reaction is demonstrated by in situ X‐ray diffraction characterization. The rational design of NASICON‐type cathodes by regulating composition with substitution of multimetal ions can provide new perspectives for high‐performance Na‐ion batteries.</p>
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
What problem does this paper attempt to address?
The problem that this paper attempts to solve is how to improve the overall performance of sodium - ion batteries (NIBs) by designing a new type of NASICON - type Na_4VMn_0.5Fe_0.5(PO_4)_3/C cathode material. Specifically, the research aims to: 1. **Reduce material cost**: Replace the high - priced vanadium (V) with low - cost active elements to reduce material cost and improve the application feasibility of sodium - ion batteries. 2. **Improve electrochemical performance**: Develop cathode materials with large reversible capacity, high voltage and good stability to enhance the comprehensive performance of sodium - ion batteries. 3. **Optimize structural stability**: Through the synergistic effect of multi - metal ions, improve the structural stability and cycle life of the material during the charging and discharging process, and reduce the performance degradation caused by structural degradation. To achieve these goals, the researchers designed and synthesized the Na_4VMn_0.5Fe_0.5(PO_4)_3/C composite material and carried out detailed characterization and electrochemical performance tests on it. The results show that the material can still maintain a reversible capacity of 96 mAh g^(-1) at a high rate of 20 C, and can still maintain a capacity retention rate of 94% after 3,000 cycles, showing excellent rate performance and long - cycle stability. In addition, through various technical means such as in - situ X - ray diffraction (XRD) and soft X - ray absorption spectroscopy (sXAS), the researchers also revealed the structural evolution and electrochemical behavior of the material during the charging and discharging process, further verifying its performance advantages.