Abstract:Concrete structures in service are often subjected to environmental/operational temperature effects, which change their inherent properties and also inflict a challenge to their extrinsic monitoring systems. Recently, piezoelectric lead zirconate titanate (PZT)-based electromechanical admittance technique has been increasingly growing into an effective tool for concrete structural health monitoring; however, uncertainty in the changes of monitoring signals induced by temperature impact on concrete/PZT sensor would inevitably cause interference to structural damage detection, which adversely hinder its application from laboratory to engineering practice. This article, aiming at exploring the temperature effect on the electromechanical admittance–based concrete damage evaluation, primarily covered a series of theoretical/numerical analysis with rigorously experimental verifications. Three aspects of comparative studies were performed in theoretical/numerical analysis: (1) thermal-dependent parameters were inclusively evaluated in contribution to the electromechanical admittance characteristics via PZT-structure interaction models; (2) three-dimensional finite element analysis in multi-physics coupled field was employed to qualitatively assess the singular temperature effect on the electromechanical admittance behaviors of free-vibrated PZT, surface-bonded PZT/inside-embedded PZT coupled healthy concrete cubes; and (3) depending on the modeling of surface-bonded PZT-/inside-embedded PZT-cracked concrete cube, thermal effect on damage evaluation was addressed via quantification on the electromechanical admittance variations. In the experimental study, rigorous validation tests were carried out on a group of lab-scale concrete cubes, where surface-bonded PZT/inside-embedded PZT transducers were simultaneously employed for electromechanical admittance monitoring in view of thermal difference between concrete surface and its inner part. Correlation coefficient deviation value-based effective frequency shifts algorithm was also employed to compensate the temperature effect. Moreover, temperature effect was further testified on the monitoring of a full-scale shield-tunnel segment structure. Experimental results indicated that temperature triggered different behaviors of electromechanical admittance signatures for surface-bonded PZT/inside-embedded PZT transducers and contaminated the electromechanical admittance responses for damage detection. Structural damage severity level can be disadvantageously amplified by temperature increment even if under the same damage scenarios.

A Three-Dimensional Model of the Effective Electromechanical Impedance for an Embedded PZT Transducer

Electro-mechanical impedance technique for concrete strength monitoring: three-dimensional model development and experimental verification

Adhesive curing effect of bonded piezoelectric transducer on electromechanical impedance-based concrete structural damage detection

Three-dimensional Finite Element Analysis Based Electromechanical Impedance Model and Its Application

Electromechanical Impedance Response of a Cracked Functionally Graded Beam with Imperfectly Bonded Piezoelectric Wafers

Piezoelectric sensor based nondestructive active monitoring of strength gain in concrete

Application of Emi Technique for Crack Detection in Continuous Beams Adhesively Bonded with Multiple Piezoelectric Patches

Sub-Frequency Interval Approach in Electromechanical Impedance Technique for Concrete Structure Health Monitoring

Temperature effect on electromechanical admittance–based concrete structural health monitoring

An electromechanical impedance approach for quantitative damage detection in Timoshenko beams with piezoelectric patches

Monitoring of Strength Gain in Concrete Using Smart Pzt Transducers

An electromechanical impedance measurement-based solution for monitoring fresh concrete maturity

Structural Damage Detection Using PZT Transmission Line Circuit Model

A PZT-Based Electromechanical Impedance Method for Monitoring the Soil Freeze–Thaw Process

Sensor Self-Diagnosis Using A Modified Impedance Model for Active Sensing-Based Structural Health Monitoring

Embedded piezoelectric transducers based early-age hydration monitoring of cement concrete added with accelerator/retarder admixtures

High-frequency Emi Signatures for Damaged Plates Using Finite Element Method

Health Monitoring of Single-Element Piezoelectric Transducer Using Its Electromechanical Admittance

A Review of the Piezoelectric Electromechanical Impedance Based Structural Health Monitoring Technique for Engineering Structures

Equivalent Parameters of Embedded PZT Elements for Concrete Structure Monitoring

An electro-mechanical impedance model of a cracked composite beam with adhesively bonded piezoelectric patches