Abstract:Purpose This paper aims to present the design development and measurement of two aerodynamic slotted X-bands back-to-back planer substrate-integrated rectangular waveguide (SIRWG/SIW) to Microstrip (MS) line transition for satellite and RADAR applications. It facilitates the realization of nonplanar (waveguide-based) circuits into planar form for easy integration with other planar (microstrip) devices, circuits and systems. This paper describes the design of a SIW to microstrip transition. The transition is broadband covering the frequency range of 8–12 GHz. The design and interconnection of microwave components like filters, power dividers, resonators, satellite dishes, sensors, transmitters and transponders are further aided by these transitions. A common planar interconnect is designed with better reflection coefficient/return loss (RL) (S 11 /S 22 ≤ 10 dB), transmission coefficient/insertion loss (IL) (S 12 /S 21 : 0–3.0 dB) and ultra-wideband bandwidth on low profile FR-4 substrate for X-band and Ku-band functioning to interconnect modern era MIC/MMIC circuits, components and devices. Design/methodology/approach Two series of metal via (6 via/row) have been used so that all surface current and electric field vectors are confined within the metallic via-wall in SIW length. Introduced aerodynamic slots in tapered portions achieve excellent impedance matching and tapered junctions with SIW are mitered for fine tuning to achieve minimum reflections and improved transmissions at X-band center frequency. Findings Using this method, the measured IL and RLs are found in concord with simulated results in full X-band (8.22–12.4 GHz). RLC T-equivalent and p-equivalent electrical circuits of the proposed design are presented at the end. Practical implications The measurement of the prototype has been carried out by an available low-cost X-band microwave bench and with a Keysight E4416A power meter in the microwave laboratory. Originality/value The transition is fabricated on FR-4 substrate with compact size 14 mm × 21.35 mm × 1.6 mm and hence economical with IL lie within limits 0.6–1 dB and RL is lower than −10 dB in bandwidth 7.05–17.10 GHz. Because of such outstanding fractional bandwidth (FBW: 100.5%), the transition could also be useful for Ku-band with IL close to 1.6 dB.

E-band “T” shape transitions between substrate integrated waveguide and standard waveguide

A New Type of Periodically Loaded Half-Mode Substrate Integrated Waveguide and Its Applications

The Design Of T-Septum Substrate Integrated Waveguide With An Ultra-Wideband Monomode

Low loss and broadband transition between substrate integrated waveguide and rectangular waveguide

Ka Band Transition Between Rectangular Waveguide and Substrate Integrated Waveguide

Novel substrate integrated waveguide layer-to-layer transitions

Full Ka-Band Right-Angle Transition from Substrate Integrated Waveguide to Air-Filled Rectangular Waveguide

Robust Microstrip to Empty Substrate-Integrated Waveguide Transition Using Tapered Artificial Dielectric Slab Matrix

A D-Band GCPW to SIW to Air-Filled RWG Cavity-Backed Transition for Integration of Communication System

Ku‐band Substrate Integrated Waveguide Transitions Between Layers

An Improved Broadband Transition Between Microstrip and Empty Substrate Integrated Waveguide

An In-Line Coaxial-to-circular Waveguide Transition at X Band

Ka-band Rectangular Waveguide to HMSIW Transition Based on Trapezoidal-shaped Probe

Compact W-band Antipodal Fin-Line Transition from SIW to Rectangular Waveguide

A Full Ka-Band Microstrip-to-waveguide Transition Using Tapered CPS Probe and V-antenna

Aerodynamic slotted SIW-to-MS line transition using mitered end taper for satellite and RADAR communications

Broadband Millimeter-Wave Power Combiner Using Compact SIW to Waveguide Transition

A Full X-Band Fully 3-D Printed E-Plane Rectangular-Coax-to-Waveguide Transition

A full Ka-band microstrip-to-waveguide transition using side-inserted magnetic coupling semicircular ring

Compact Rectangular Waveguide to Hmsiw Transition