Abstract:Tin sulfide-based anodic materials with high specific capacities for lithium storage have attracted some attentions. Whereas, their poor cycling stability caused by the sever volume variation upon the repeated charge/discharge processes and their intrinsic poor electrical conductivity still need to be solved urgently. Herein, a bio-inspired hierarchical nanofibrous SnS/C composite was synthesized by employing natural cellulose substance as both scaffold and carbon source. Tin oxide gel film was firstly deposited on each cellulose nanofiber through layer-by-layer self-assembly processes, and then the composite was sulfided by hydrothermal treatment followed by carbonization and reduction in Ar atmosphere. The resultant nanocomposite manifests a unique three-dimensional (3D) porous structure composed of interlaced carbon nanofibers anchored with SnS nanoflakes. Used as the anodic material in lithium-ion batteries, the SnS/C composite exhibits remarkable electrochemical performances with a high specific capacity (1396 mAh g(-1) in the 1st cycle at 100 mA g(-1)), long cycle life (612 mAh g(-1) after 70 cycles) and good rate capacity (298 mAh g(-1) at 1000 mA g(-1)), which are superior to the nanofibrous SnS2. The superior anodic performances of the SnS/C composite are mainly due to the 3D hierarchical porous nanostructure and the nanofibrous carbon conductive matrix together with the ultrathin carbon-coating layer, promoting the electrode-electrolyte contact, accommodating the drastic volume changes of SnS, inhibiting the active SnS particles from aggregation and facilitating the electron transfer and lithium-ion diffusion during the charge/discharge processes. (C) 2020 Elsevier B.V. All rights reserved.

Comparison between SnSb–C and Sn–C composites as anode materials for lithium-ion batteries

A high-performance tin phosphide/carbon composite anode for lithium-ion batteries

Research for SnS/C nanocomposite as lithium-ion battery anode materials

Facile Preparation of One-Dimensional Hollow Tin Dioxide@carbon Nanocomposite for Lithium-Ion Battery Anode

Comparison between SnSb-C and SnC composites as anode materials for Li-ion batteries

Sn/SnO 2 @C Composite Nanofibers As Advanced Anode for Lithium-Ion Batteries

Electrochemical Performance of SnO_2-Si/C Composite for Anode Materials of Lithium-Ion Battery

Ordered Mesoporous Sn–C Composite As an Anode Material for Lithium Ion Batteries

The nanocomposites of carbon nanotube with Sb and SnSb0.5 as Li-ion battery anodes

Facile synthesis and electrochemical characterization of Sn 4Ni 3/C nanocomposites as anode materials for lithium ion batteries

A Study on SnSb Alloy-Graphite Composites As Anode Materials for Lithium Ion Batteries

Bio-inspired Hierarchical Nanofibrous SnS/C Composite with Enhanced Anodic Performances in Lithium-Ion Batteries

Net-like SnS/carbon Nanocomposite Film Anode Material for Lithium Ion Batteries

Preparation of a Sb/Cu2Sb/C composite as an anode material for lithium-ion batteries

SnS@C nanoparticles anchored on graphene oxide as high-performance anode materials for lithium-ion batteries

In-situ vulcanization synthesis of honeycomb-like SnS/C nanocomposites as anode materials for lithium-ion batteries

SnS2- Compared to SnO2-Stabilized S/C Composites Toward High-Performance Lithium Sulfur Batteries

Rationally designed C/Co 9 S 8 @SnS 2 nanocomposite as a highly efficient anode for lithium-ion batteries

Electrochemical Characteristics and Intercalation Mechanism of ZnS/C Composite As Anode Active Material for Lithium-Ion Batteries

Facile synthesis of high N-content carbon-confined amorphous SnS as anode material for lithium-ion batteries

SnSb–ZnO composite materials as high performance anodes for lithium-ion batteries