Abstract:Driven by the rapidly-growing of hybrid and electric vehicles, there is an increasing demand on lithium ion batteries (LIBs) with high energy density, long cycle life, and low cost. One of the most widely used anode materials in LIBs, graphite, only possesses a theoretical specific capacity of about 370 mAh/g, limiting the specific energy of LIBs.1 Recently, conversion-type of electrode materials, i.e. metal oxide and metal sulfide, has been regarded as one of the most promising anode materials for high performance LIBs, due to the low cost and exceptionally high specific capacity (>1000 mAh/g).2 However, these conversion-type electrode materials suffers from several issues, i.e. relatively low conductivity and rapid capacity fade due to irreversible phase change and particle pulverization during cycling. For example, the poor performance of tin oxide is mainly caused by its low intrinsic conductivity, formation of irreversible insulating Li2O phase during discharging, and large volume change.3 To overcome these disadvantages, various methods have been developed, like carbon/tin oxide composites, tin phosphide (Sn4P3). Tin phosphide has a layered structure and can be prepared by a mechanochemical or hydrothermal method. It has shown promising electrochemical performance as the anode in Li-ion batteries.4,5 As the lithium was inserted, Sn4P3 was first converted into lithium phosphides and Sn, followed by lithium-tin alloy formation. The advantage of Sn4P3 is its high capacity and Li+ conductivity of the Li3P. However, it suffers from similar drawbacks as tin oxide, i.e. large volume change and irreversible Li3P phase formation. In this work, we prepared Sn4P3 nanowires by hydrothermal reaction of red phosphorus and tin in ethylenediamine at 200 °C for 40 h. Then, graphite/Sn4P3 composites were prepared by high-energy ball milling for 2 h under Ar atmosphere. Graphite and Sn4P3 were uniformly distributed in the composites, shown in Figure 1a. When tested as the anode materials, the composites showed superior performance compared to Sn4P3 alone. The capacity of Sn4P3 rapidly decreased to around 200 mAh/g after 15 cycles. In comparison, graphite/Sn4P3 composites showed an initial specific capacity of about 1014 mAh/g and maintained a capacity of 782 mAh/g after 50 cycles. In addition, the coulombic efficiency was also much higher in the graphite/Sn4P3 composites, indicating a reversible Li insertion/deinsertion behavior and more stable SEI layer. The rate performance of graphite/Sn4P3 composites was also much better than pure Sn4P3. In conclusion, we report a facile preparation of graphite/Sn4P3 composites with excellent electrochemical performance as anode material in Li-ion batteries. Figure 1

A Study on SnSb Alloy-Graphite Composites As Anode Materials for Lithium Ion Batteries

Mo-Doped SnO2 Nanoparticles Embedded in Ultrathin Graphite Nanosheets as a High-Reversible-Capacity, Superior-Rate, and Long-Cycle-Life Anode Material for Lithium-Ion Batteries

Research for SnS/C nanocomposite as lithium-ion battery anode materials

Large-scale synthesis and application of SnS2–graphene nanocomposites as anode materials for lithium-ion batteries with enhanced cyclic performance and reversible capacity

SnSb–ZnO composite materials as high performance anodes for lithium-ion batteries

Synthesis and Electrochemistry Properties of Sn–Sb Ultrafine Particles As Anode of Lithium-Ion Batteries

Preparation of high capacity Sn2S3/Sn3S4/FeS/Fe7S8 heterostructure composite lithium-ion battery anodes from reducing agents Fe and tin-based sulfides

Effects of Graphite on Zn-Sb Alloys As Anode Materials for Lithium-Ion Batteries

Synthesis and Electrochemical Properties of Ultrafine Sn and SnO2 Dispersed Carbon Matrix Composite Anode Materials for Li-ion Batteries

SnSb Alloy Nanoparticles Embedded in N-doped Porous Carbon Nanofibers As a High-Capacity Anode Material for Lithium-Ion Batteries

SnS@C nanoparticles anchored on graphene oxide as high-performance anode materials for lithium-ion batteries

Investigation of Graphite/Tin Phosphide Composites As the Potential Anode in Li-Ion Batteries

SnS2@reduced Graphene Oxide Nanocomposites As Anode Materials with High Capacity for Rechargeable Lithium Ion Batteries

Sb-Based Alloy (Nisb, Fesb2) Nanoparticles Decorated Graphene Prepared By One-Step Solvothermal Route As Anode For Li-Ion Batteries

In-situ vulcanization synthesis of honeycomb-like SnS/C nanocomposites as anode materials for lithium-ion batteries

Synthesis and Electrochemical Li-storage Performance of SnS2-SnO2/Graphene Composites

CoSb 3 -Graphite Composite Anode Material for Lithium Ion Batteries

High-performance Sb2S3/Sb Anode Materials for Li-ion Batteries

A New Process of Preparing Composite Microstructure Anode for Lithium Ion Batteries

An electrochemical and structural investigation of porous composite anode materials for LIB

Synthesis and Electrochemical Performances of Cobalt Sulfides/graphene Nanocomposite As Anode Material of Li-ion Battery