Abstract:Modern civilization and cutting-edge technologies and tools are highly dependent on energy storage devices and demand efficient and long-lasting high-energy-density storage devices. Lithium metal batteries have surpassed their competitors concerning energy density due to their inherent high specific capacity (3860 mAh/g) and the lowest electrochemical potential (-3.04 V vs. standard hydrogen electrode), proving to be one of the most favorable energy storage devices for smart and mobile gadgets, electric automobiles, grid storage, etc. However, safety-threatening and performance-decay challenges associated with lithium metal anodes, such as lithium dendrite formation, uncontrolled parasitic reactions between Li-metal and electrolyte, low coulombic efficiency, dead Li-formation, etc., restrict its employment in practical batteries. The root cause of the dendrite formation is poor Li-ion conductivity of bulk lithium metal, which results in an uneven electric field distribution, leading to non-uniform Li deposition/stripping upon repeated charge/discharge. Herein, a facile chemical reduction process is being opted to fabricate a highly Li-ion diffusive Li-Sn-based artificial SEI layer on the lithium metal surface to prevail over the above-mentioned issues. Therefore, upon careful concentration investigation of reactants, 25 mM precursor concentration (SnCl 4 in EC: DMC in 1:1 volume ration) demonstrated the best electrochemical performance, revealing a cumulative capacity of over 700 mAh/cm 2 at a current density of 1 mA/cm 2 for 1 h in a symmetric cell. Physical characterizations (XRD and SEM-EDS) showed a thin layer containing Li-Sn alloys along with LiCl formed at the lithium metal surface. Possessing high Li-ion diffusivity, Li-Sn alloyed hybrid anode illustrated a gradual decrease in the charge transfer resistance on increasing the concentration, thus, lower overpotential in symmetric cells, in contrast to pristine Li-metal. However, an increase in the electrical resistance has been observed on increasing the precursor concentration due to the presence of the insulating LiCl phase in the protective layer. Moreover, in-situ optical microscopy demonstrated more uniform and on-surface Li-deposition for the hybrid electrode, whereas mossy and dendritic growth on bare Li-metal. Full cells prepared with Li-Sn alloyed anode against NMC532 cathode illustrated stable cycling up to 150 cycles; contrastingly, the cell with pristine Li-metal showed a drastic capacity fade just after 100 cycles, demonstrating the inclination towards safer lithium metal batteries.

Synthesis and Electrochemistry Properties of Sn–Sb Ultrafine Particles As Anode of Lithium-Ion Batteries

Synthesis and Electrochemical Properties of Sn-Sb Alloy Prepared by Hydrogen Plasma-Metal Reaction

Mechanochemical synthesis and electrochemical properties of nanosized SnS as an anode material for lithium ion batteries

A Study on SnSb Alloy-Graphite Composites As Anode Materials for Lithium Ion Batteries

SnSb Alloy Nanoparticles Embedded in N-doped Porous Carbon Nanofibers As a High-Capacity Anode Material for Lithium-Ion Batteries

Rational Synthesis of SnS 2 @C Hollow Microspheres with Superior Stability for Lithium-Ion Batteries

Atomically Dispersed Sn Incorporated into Carbon Matrix for Stable Electrochemical Lithium Storage

SnSb–ZnO composite materials as high performance anodes for lithium-ion batteries

Preparation and property of nanometer Cu-Sn alloy anode material for lithium-ion batteries

Binder-free ultrathin SnS2 with superior reversibility of conversion reaction for high-rate lithium ion batteries

Preparation and Electrochemical Performances of Nanoscale FeSn2 As Anode Material for Lithium Ion Batteries

Realizing Ultrathin LiSn Alloy Anode by Tuning the Wettability of Molten Li for High-Energy-Density Batteries

Research for SnS/C nanocomposite as lithium-ion battery anode materials

SnS particles anchored on Ti<sub>3</sub>C<sub>2</sub> nanosheets as high-performance anodes for lithium-ion batteries

High-performance Sb2S3/Sb Anode Materials for Li-ion Batteries

Favorable Interfacial Chemomechanics Enables Stable Cycling of High Li-Content Li-In/Sn Anodes in Sulfide Electrolyte Based Solid-State Batteries

Preparation of high capacity Sn2S3/Sn3S4/FeS/Fe7S8 heterostructure composite lithium-ion battery anodes from reducing agents Fe and tin-based sulfides

Nanoscale SnS with and without carbon-coatings as an anode material for lithium ion batteries

Facile Solution Synthesis of Tin Sulfide Nanobelts for Lithium-Ion Batteries

The synthesis of composite Sn–SnSb films for lithium-ion batteries by electrochemical deposition

Li-Sn Alloyed Layer Containing Artificial SEI on Li-Metal Anode for Superior Lithium Metal Batteries: Development and Understanding of Anode/Electrolyte Interfacial Phenomena