Abstract:One of the trendiest areas in the world of materials research is multifunctional polymer nanocomposites. The long-term behaviour of fibre-reinforced polymer composites exposed to cryogenic environments is discussed in this article in light of current advancements. The composites were created using the standard hand layup procedure in order to achieve the aforementioned goals. Crown flower fibre (CF) serves as a reinforcement, while 3 wt.% of nano-SiO 2 and 3 wt.% of zinc borates (4ZnO·B 2 O 3 ·H 2 O) serve as fillers, and the LY566 type of epoxy resin with the HY 951 type of hardener were considered as a matrix system. To complete the mentioned objectives, three types of composites were fabricated: pure epoxy-based CF laminate, CF/3 wt.% of nano SiO 2 hybrid, and CF/3 wt.% of nano 4ZnO·B 2 O 3 ·H 2 O-based hybrid laminates. Analysis of the mechanical behaviour of composite materials that had been created was done under both normal and cryogenic circumstances at two distinct temperatures (−60 and 30 °C). To investigate the flammability properties of the hybrid composites, tests with horizontal and vertical flame retardants were conducted. X-ray diffraction and Fourier transform infrared spectroscopy studies were used to validate the nanofiller's existence. The manufactured CF/3 wt.% of SiO 2 -based hybrid composites have good mechanical capabilities in a cryogenic environment of −60 °C, according to the results. This is because the 3 wt% SiO 2 -loaded samples are more resistant to deformation and can take more force before breaking at the impact zone because they have a larger surface area per volume fraction and better adhesion. In terms of flammability characteristics, the hybrid CF/ 3 wt.% of 4ZnO.B 2 O 3. H 2 O (zinc borate) exhibits better results (burning rate of 7.14 mm/min). The burning rate was reduced as a result of the use of nanofillers. This is due to zinc borate's promising flame-retardant qualities, which prevent flame spread and aid in flame extinguishment.

Mechanical Properties of SiO 2 /epoxy Nanocomposites at Cryogenic Temperature

Behavior of epoxy resin filled with nano-SiO<sub>2</sub> treated with a Eugenol epoxy silane

Bio-based epoxy functionalized MQ silicone resins: from synthesis to toughened epoxy composites with good mechanical properties, thermal resistance and transparency

DC Breakdown and Surface Potential Behavior of Epoxy/Al<sub>2</sub>O<sub>3</sub> Nanocomposites at Cryogenic Temperature

Influence of flexible molecular structure on the cryogenic mechanical properties of epoxy matrix and carbon fiber/epoxy composite laminate

Epoxy-functionalized polysiloxane/Nano-SiO2 synergistic reinforcement in cryogenic mechanical properties of epoxy and carbon fiber reinforced epoxy laminate

Enhanced Mechanical Properties of SiC/Al Composites at Cryogenic Temperatures

Research into Mechanical Properties of Reaction-Bonded Sic Composites at Cryogenic Temperatures

Preparation and thermal properties of epoxy-silica nanocomposites from nanoscale colloidal silica

Computational Study of the Nanoscale Mechanical Properties of C-S-H Composites under Different Temperatures

Simulation analysis of cryogenic mechanical properties of carbon fiber reinforced silicon-containing epoxy resin composite

Mechanical behaviors of hyberbranched epoxy toughened bisphenol F epoxy resin for cryogenic applications

Cryogenic properties of PEG/nano-SiO2 co-toughened winding resin and its carbon fiber-reinforced composites

Thermal and Mechanical Properties and Micro-Mechanism of SiO2/epoxy Nanodielectrics*

Role of Cryogenic Temperature on the Strengthening Mechanism of Sicw-Al2o3 Composites

Micro-crack behavior of carbon fiber reinforced Fe3O4/graphene oxide modified epoxy composites for cryogenic application

Exploring Mechanical and Flammability Traits in Hybrid Composites of Crown Flower/Nano SiO2/4ZnO·B2O3·H2O under Cryogenic Conditions: an Experimental Study

Si3N4-SiCw composites as structural materials for cryogenic application

Research of Mechanical and Thermal Properties of SiC at Cryogenic Temperatures

Effect of the Coupling Agent (3-Aminopropyl) Triethoxysilane on the Structure and Fire Behavior of Solvent-Free One-Pot Synthesized Silica-Epoxy Nanocomposites

Effect of Silica Nanofiller on Thermal-Oxidative Degradation of Epoxy Composites Synthesized by the Sol-Gel Method